In-fiber modal interferometers have been widely used in the applications of biochemical sensing, mine safety and health monitoring of buildings. The temperature feature of sensors is one of the most important characteristics, but the studies are rarely reported under the condition of subzero temperature. In this paper, through core-mismatch fiber splicing method, three in-fiber Mach-Zehnder interferometers (MZIs) are fabricated based on single-mode fiber (SMF), erbium-doped fiber (EDF, with core diameter of 3.6 μm) and multimode fiber (MMF, with core diameter of 50 μm), respectively. Their interference patterns are investigated through beam propagation method and Fast Fourier Transform analysis. The comprehensive tests of temperature are then performed in the range from -40 to 0°C. The experimental results show that, in subzero temperature, the transmission spectrums of MZI sensors based on single mode fiber (SMF) and MMF are worsened in terms of fringe visibility and intensity. And the sensitivity of MMF-based structure is 68.8 pm/°C with a 12.3-dB deduction of fringe visibility. Comparatively, the EDF-based MZI presents ideal sensitivity due to negative gain-temperature feature. By calculation, the 124.7 pm/°C sensitivity is gained with the linearity of 0.9892. Moreover, 10-dB enhancement in intensity and over-20-dB fringe visibility are demonstrated, which indicates that the EDF-based sensor is potential and promising for the applications of cryogenic sensing.
In this paper, a novel fiber ring laser (FRL) is proposed and investigated based on modal interference. Through core-offset splicing technique, an in-fiber Mach-Zehnder interferometer (MZI) is fabricated based on thin-core fiber and single mode fibers. Its distribution of light filed is comprehensively analyzed by beam propagation method. The FRL is then setup, in which the fabricated MZI is used as a band-pass filter. The output of laser is controlled and optimized by accurately adjusting the state of polarization controller. The experimental results show that, the extinction ratio of lasing wavelength reaches 39.8 dB, and the line width is less than 0.1 nm. Moreover, the proposed FRL is applied in temperature sensing, and the tested sensitivity reaches 122.7 pm/°C with the linearity of 0.9982. In addition, by calculation, the amplitude noise and the spectrum resolution are 8.84×10-3 nm and 2.89×10-3 nm, respectively. Therefore the detection limit in this laser sensor is about 0.07°C, which is obviously higher than that in passive fiber optic sensor.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.