Bulk single crystals of CdZnTe compound semiconductor is used for room temperature
radiation detection in commercial radiation sensors. A large volume of detector material
with low defect density is required for increasing the detection efficiency. Manufacture of
such a bulky detector-quality material with low defect density is expensive. In this
communication, synthesis of nanowires arrays of CdZnTe that can be used for detecting
low energy radiation is reported for the first time. CdZnTe ternary compound
semiconductor, referred as CZT, was electrodeposited in the form of nanowires onto a
TiO2 nanotubular template in non-aqueous electrolytes using a pulse-reverse process at
130 °C. Very high electrical resistivity of the CZT nanowires (in the order of 1010 Ω-cm)
was obtained. Such a high resistivity was attributed to the presence of deep defect states
such as cadmium vacancies created by the anodic cycle of the pulse-reverse
electrodeposition process. Stacks of series connected CZT nanowire arrays were
impressed with different bias potentials. The leakage current was in the order of tens of
PicoAmperes. When exposed to a radiation source (Am -241, 60 keV), the current flow
in the circuit increased. The preliminary results indicate that the CZT nanowire arrays can
be used as radiation detector materials at room temperature with a much low bias
potential (0.7 - 2.3 V) as against 300 - 500 V applied to the bulk detector materials.
The sonoelectrochemical method is a highly efficient technique for the synthesis of well ordered and robust titanium
dioxide nanotube arrays. Self ordered arrays of TiO2 nanotubes of various diameters and length can be rapidly
synthesized under an applied potential of 5-20 V in the presence of organic electrolyte solvents like ethylene glycol. The
TiO2 nanotubes prepared in the organic electrolytes and annealed under N2 atmospheres give a TiO2-xCx type of
semiconductor materials having a band gap of 2.0 eV. The hybride nanotubes demonstrated promising efficiency in
splitting water in the presence of solar light. In addition, the modeling of titania nanotubes using the first principles of
the Density Functional Theory (DFT) approach is underway for calculating electronic properties of the TiO2 nanotubular
structure. It is envisioned that the DFT modeling will yield valuable information in developing improved titania
photoanodes for high efficiency photoelectrochemical splitting of water.
Anodization of Ti in acidified fluoride solution resulted in a vertically oriented and an ordered nanotubular titanium
oxide surface. Annealing of the TiO2 nanotubular arrays in a carbonaceous or nitrogen containing atmosphere
presumably resulted in band-gap states, which enhanced the photo-activity. Composite electrode of nanotubular TiO2 +
carbon doping resulted in a photocurrent density of more than 2.75 mA/cm2 at 0.2 V(Ag/AgCl) under simulated solar light
illumination. The enhanced photo-activity of the carbon-modified nanotubular TiO2 is highly reproducible and
sustainable for longer duration. The charge carrier densities, calculated based on the Mott-Schottky analyses, were in the
range of 1-3 x 1019 cm-3 for both the carbon modified and the nitrogen-annealed nanotubular TiO2 samples. The asanodized
and oxygen-annealed samples showed a charge carrier density of 5 x 1017 and 1.2 x1015 cm-3 respectively. In
this study, the measured photo current density was not directly related to the charge carrier densities of the nanotubes.
Presence of different phases, such as amorphous, anatase and rutile, influenced the photo activity more than the charge
carrier density.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.