The established method to measure aspherical surfaces is interferometric testing with null optics, but due to economical
reasons the applications are limited. A special null optic has to be calculated, fabricated and qualified for each individual
type of asphere. This time- and money consuming method is only cost-efficient for large quantities or when tests require
high accuracy. We propose a new and flexible technique for measuring an ensemble of different aspheres with only one
measurement setup. The main idea is to use the wavelength as a tunable parameter. Because it is possible to change the
wavelength without introducing new errors by mechanical movements, the wavelength variation results in a higher
measurement flexibility without reducing the measurement accuracy.
We present the chromatic Fizeau Interferometer with a diffractive element as null-optic for the measurement of a set of
four aspheres. We will show the influence of unwanted diffraction orders and the expected measurement accuracy. As in
the monochromatic setup, especially the area around the optical axis is problematic and can not be measured with the
desired accuracy. The use of a small aperture stop on the optical axis is recommended because errors in other radial
domains are filtered as well. The results show, that the chromatic Fizeau interferometer makes the established
monochromatic method far more flexible and that different aspheres can be measured in the same setup.
Shack-Hartmann sensors are commonly used wavefront sensors in a large field of applications, like adaptive optics, beam characterization and non-contact measurements. They are popular because of the ease of use and the robustness of the sensor. We introduce a new way to improve the performance of miniaturized and mass-producible optical wavefront sensors for industrial inspection: A sensor design due to an aperiodic diffractive element working as microlens array allows the use of small and cost-efficient detector chips. The diffractive element was optimized using raytracing and thin element approximation (done in Zemax). As an example, we present the design and realization of a sensor for laboratory use with a measurement diameter of 20mm. We show an example measurement and results concerning dynamic range. The measurement accuracy was determined by measuring spherical waves.
Holographic tweezers offer a very versatile tool in many trapping applications. Compared to tweezers working with acousto optical modulators or using the generalized phase contrast, holographic tweezers so far were relatively slow. The computation time for a hologram was much longer than the modulation frequency of the modulator. To overcome this drawback we present a method using modified algorithms which run on state of the art graphics boards and
not on the CPU. This gives the potential for a fast manipulation of many traps, for cell sorting for example, as well as for a real-time aberration control. The control of aberrations which can vary spatially or temporally is relevant to many real world applications. This can be accomplished by applying an iterative approach based on image processing.
The adaptive Shack-Hartmann sensor (ASHS) is a modifictaion of the conventional Shack Hartman sensor which uses a dynamic Liquid Crystal Display (LCD) in replacement of the static diffractive or refractive microlens array. The LCD is used to display an array of Fresnel microlenses. The microlenses can be adapted to the wavefront in order to enhance measurement accuracy and dynamic range.
Because of the relatively large pixel of the LCD the size of the microlenses is larger than in a conventional sensor. The number of microlenses is limited by the resolution of the LCD and therefore smaller than in a conventional sensor. Certain considerations are required when restoring the wavefront phase values with the reconstruction algorithm.
We present two matrix inversion reconstruction methods: The classic Zernike approach and a BSpline algorithm. We will compare these two methods on the basis of fit accuracy, reconstruction time and the effect of noise and missing data points.
Active and adaptive optics are becoming more important in the field of beam shaping and wave front analysis. One of the main reasons for the progress and recent activities in active optics is the availability of new active elements like deformable mirrors, micro mirrors and liquid crystals. The application of spatial light modulators for wave front adaption, shaping and sensing will be discussed. An important application is a flexible testing procedure for testing aspheric surfaces using adaptive optics such as deformable mirrors liquid crystals and micro mirrors.
Active systems are becoming more and more prevalent in the the field of optical technology. These systems require not only means of controlling wavefronts but mostly also of sensing wavefronts. This paper shows in four examples how spatial light modulators can be utilized to perform active wavefront sensing and wavefront controlling tasks. The examples include an interferometer with a flexible reference, a method to determine and compensate wave aberrations in focusing optical systems, an adaptive Shack-Hartmann sensor with a microlens array generated by a liquid crystal display and wavefront error compensation strategies with a piston micro mirror array.
Spatial light modulators are of growing interest not only for optical correlators but also for new optical measurement and processing methods. We present different applications of dynamic phase holograms
based on liquid crystal elements in the field of optical measurement and manipulation. Within digital holography, modern modulators can be used in order to test the geometry as well as the behavior of objects under external load. A direct comparison between the test objects and a master object at different locations around the world is possible. Holographic tweezers are used in order to position small particles in three dimensions and to measure very small forces. We also present results of novel methods for testing aspheric surfaces and the application of dynamic hologram reconstructions for the ablation of complex patterns on the microscopic scale.
We present a new type of Shack-Hartmann sensor. Replacing the static microlens array in a Shack-Hartmann sensor by a liquid crystal display results in a greater measurement flexibility. The liquid-crystal display in the adaptive Shack-Hartmann Sensor is used for the generation of an array of Fresnel microlenses. The design parameters of the microlenses like focal length, number of lenses, position, and aperture size can be quickly adapted to solve difficult measurement tasks. Furthermore the adaptive Shack-Hartmann sensor allows a pre-correction of the hologram to the wave-front to take care of larger aberrations and to achieve a higher measurement accuracy. We compare the adaptive sensor with a conventional Shack-Hartmann sensor and discuss new strategies to determine the wave-front that are possible with this active system.
For wavefront sensing, wavefront shaping, and optical filtering, spatial light modulators can be very useful. With the availability of high resolution liquid crystals (LC) spatial phase modulators and micromechanical systems (MEMS) containing large arrays of micromirrors, new applications in optical metrology become possible. For wavefront analysis and correction, dynamic CGHs are used. A correction hologram for the aberrated system is computed from which the lens shape can be derived. For Hartmann sensors, usually static microlenses are used. It was found advantageous to generate dynamic microlenses in order to correct for local wavefront aberrations. Optically addressed spatial light modulators can be applied very effectively for the characterisation and defect analysis of primarily periodic structures such as microchips or microlens arrays. For triangulation based methods, better results can be obtained by adapting the projected fringes to the object in terms of shape and brightness. Examples and experimental results are discussed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.