In this work we studied a newly reported class of nonlinear effects observed in 5CB liquid crystals doped with gold nanoparticles (GNPs). The size of the GNP was determined by direct TEM imaging and by X-ray scattering of the diluted NP solution. GNPs was coated by thiols with the ratio of mesogenic to n-alkyl thiols varying from 1:2 to 1:1. The research involved comparing properties of both undoped and doped 5CB (nematic LC) by infiltrating LC cell and microholes of the photonic crystal fiber (PCF) separately. In our experiment the PCF fiber type LMA-10 made by NKT Photonics as host material has been used.
The irradiation of polylactide by KrF excimer laser with subthreshold fluence results in modification of its properties via photochemical reactions. A common approach is to modify chemical composition of polymer surface by UV irradiation, for example, in order to improve their wetting properties. In this paper, authors present a possibility of bulk modification of poly(L-lactide) which is related to photofragmentation and creation of new terminal groups. The irradiation results in decrease of molecular weight and increase of polydispersity. The appearance of new terminal groups is responsible for enhancement of absorption in UV-C range. The intensity of chemical composition changes introduced by UV irradiation can be precisely dosed thanks to a pulse character of laser source. Modifications can be controlled during the process by the analysis of energy transmitted through a polymer sheet. The distribution of absorption coefficient changes along with the depth of irradiated polymer and its correlation with polydispersity was discussed. Presented technique can be used for selective and controllable modification of hydrolytic degradation time of biodegradable polyesters utilized in biomedical applications.
In this paper, we present some examples of micromachining of poly(L-lactide) with a CO2 laser and an analysis of changes in material properties in the heat affected HAZ induced by the fluence well above the ablation threshold. The complexity of the processes of decomposition implies the need for simultaneous use of many selective analytical techniques which complement each other to give a full image of the changes. Introduced changes were characterized using Differential Scanning Calorimetry (DSC), Gel Permeation Chromatography (GPC), X-ray Photoelectron Spectroscopy (XPS) and Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR). It turns out that CO2 laser processing of poly(L-lactide) mainly induces surface changes. However, oxidation of the surface was not observed. We recorded a bimodal distribution and some reduction in the molecular weight. Infrared spectroscopy in turn revealed the existence of absorption bands, characteristic for the vinyl groups (RCH=CH2). The appearance of these bands indicates that the decomposition of the polymer occurred, among others, by means of the cis-elimination reaction.
In this paper an alternative method of manufacturing SRR structures through the selective removal of a thin layer of silver-palladium deposited on the surface of the Al2O3 ceramic by laser ablation process using nanosecond Nd:YAG laser (1064 nm) was presented. The SRR structures array were subject to transmittance measurements using the TDS (Time Domain Spectroscopy). Both electric and magnetic resonances were observed at frequencies determined by the structural parameters of the SRR. In case of the E field perpendicular to an SRR structure and one resonance area for 0.56 THz with the E field parallel to the structure, two characteristic resonant dips for 0.31 THz and 0.62 THz were obtained. Studies have confirmed that using selective laser removal process enables the preparation of the resonant structure in the range of THz.
Laser micromachining systems based on excimer lasers are usually oriented to work with mask projection regime because of the low pulse repetition rate as well as large beam aperture of the laser source. In case of fabricating of the complex 3D structures, this approach introduces a number of limitations. Alternative solution might be usage of direct writing laser mode. Some examples of the so called contour ablation approach for fabricating microlenses with an absolutely monotonically changing cross-sectional profile are presented in the literature. Based on this idea and introducing new variables like automatic mask selection as well as optimizing process algorithms led us to obtain more versatile method for shape approximation. Hence, there were fabricated structures with cross-sectional profiles described as functions that are monotonic on specified intervals such as Fresnel microlenses. In this paper we describe approximation of process parameters for obtaining desired cross-sectional profiles and finally fabrication of few exemplary microlenses. All structures were characterized by a digital optical microscopy and compared to the given profiles. The accuracy of reproduction of the desired structures at the level of single microns was achieved.
Laser-induced breakdown spectroscopy (LIBS) is a fast, fully optical method, that needs little or no sample preparation. In this technique qualitative and quantitative analysis is based on comparison. The determination of composition is generally based on the construction of a calibration curve namely the LIBS signal versus the concentration of the analyte. Typically, to calibrate the system, certified reference materials with known elemental composition are used. Nevertheless, such samples due to differences in the overall composition with respect to the used complex inorganic materials can influence significantly on the accuracy. There are also some intermediate factors which can cause imprecision in measurements, such as optical absorption, surface structure, thermal conductivity etc. This paper presents the calibration procedure performed with especially prepared pellets from the tested materials, which composition was previously defined. We also proposed methods of post-processing which allowed for mitigation of the matrix effects and for a reliable and accurate analysis. This technique was implemented for determination of trace elements in industrial copper concentrates standardized by conventional atomic absorption spectroscopy with a flame atomizer. A series of copper flotation concentrate samples was analyzed for contents of three elements, that is silver, cobalt and vanadium. It has been shown that the described technique can be used to qualitative and quantitative analyses of complex inorganic materials, such as copper flotation concentrates.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.