DeepSpec is a novel R~650 broad-band (365nm-900nm) spectrograph planned for the Weizmann Multi-Aperture Spectroscopic Telescope (MAST). MAST is an array of twenty 60cm PlaneWave telescopes, capable of either acting as a single 2.7m telescope or multiplexing over the entire sky using smaller flexible groups. This approach will make the combination of MAST/DeepSpec a unique facility worldwide in terms of its low cost, flexibility and efficiency, capable of observing up to hundreds of targets per night spread over large areas. With an end-to-end throughput of >65%, DeepSpec will be able to observe targets fainter than 20.5mag in a 15-min exposure using all telescopes, or tens/hundreds of spectra per hour of 18-19 magnitude targets using smaller groups of telescopes – making it an ideal instrument for time-domain astronomy. DeepSpec is currently in the assembly, integration and testing phase and is planned to start on-sky commissioning by summer of 2024.
We present our numerical simulation approach for the End-to-End (E2E) model applied to various astronomical spectrographs, such as SOXS (ESO-NTT), CUBES (ESO-VLT), and ANDES (ESO-ELT), covering multiple wavelength regions. The E2E model aim at simulating the expected astronomical observations starting from the radiation of the scientific sources (or calibration sources) up to the raw-frame data produced by the detectors. The comprehensive description includes E2E architecture, computational models, and tools for rendering the simulated frames. Collaboration with Data Reduction Software (DRS) teams is discussed, along with efforts to meet instrument requirements. The contribution to the cross-correlation algorithm for the Active Flexure Compensation (AFC) system of CUBES is detailed.
SOXS (SOn of X-Shooter) is a high-efficiency spectrograph with a mean Resolution-Slit product of about 3500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph, and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. During the last year, we performed the instrument AIV at the integration site in Europe. It is still ongoing. We present an overview of the flow for validation of the scientific and technical requirements, after integration of the sub-systems with some results as highlights. Further, we give an overview of the methodologies used for planning and managing the assembly of the sub-systems, their integration, and tests before the acceptance of the instrument in Europe (PAE). SOXS could be used as an example for the system engineering of an instrument of moderate complexity, with a large geographic spread of the team.
We present the advancements in the development of the scheduler for the Son Of X-shooter (SOXS, 1,2) instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. Its primary purpose is to conduct UV-visible and near-infrared follow-up observations of astrophysical transients, drawing from a broad pool of targets accessible through the streaming services of wide-field telescopes, both current and future, as well as high-energy satellites. The instrument is set to cater to various scientific objectives within the astrophysical community, each entailing specific requirements for observation planning, a challenge that the observing scheduler must address. A notable feature of SOXS is that it will operate at the European Southern Observatory (ESO) in La Silla, without the presence of astronomers on the mountain. This poses a unique challenge for the scheduling process, demanding a fully automated algorithm that is autonomously interacting with the appropriate databases and the La Silla Weather API, and is capable of presenting the operator not only with an ordered list of optimal targets (in terms of observing constraints) but also with optimal backups in the event of changing weather conditions. This requirement imposes the necessity for a scheduler with rapid-response capabilities without compromising the optimization process, ensuring the high quality of observations and best use of the time at the telescope. We thus developed a new highly available and scalable architecture, implementing API Restful applications like Docker Containers, API Gateway, and Python-based Flask frameworks. We provide an overview of the current state of the scheduler, which is now ready for the approaching on-site testing during Commissioning phase, along with insights into its web interface and preliminary performance tests.
The Instrument Control Software of SOXS (Son Of X-Shooter), the forthcoming spectrograph for the ESO New Technology Telescope at the La Silla Observatory, has reached a mature state of development and is approaching the crucial Preliminary Acceptance in Europe phase. Now that all the subsystems have been integrated in the laboratories of the Padova Astronomical Observatory, the team operates for testing purposes with the whole instrument at both engineering and scientific level. These activities will make use of a set of software peculiarities that will be discussed in this contribution. In particular, we focus on the synoptic panel, the co-rotator system special device, on the Active Flexure Compensation system which controls two separate piezo tip-tilt devices.
G-CLEF is a high-resolution, stabilized, fiber-fed spectrograph designed for the GiantMagellan Telescope (GMT). Before its deployment on the GMT, the instrument will be coupled to the Magellan Clay telescope for several years – the G@M phase. While the spectrograph does not require any modifications, a newly developed interface is required to couple G-CLEF to the telescope. G@M will provide four seeing-limited observing modes and one AO observing mode with the Magellan MagAO-X platform. The design of the seeing-limited front-end unit ensures efficient injection of target, sky/background, and calibration light into the optical fibers. This unit is complemented by additional submodules within the fiber run, incorporating slicing and scrambling capabilities to support extreme precision radial velocity measurement and extreme resolution modes.
SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and preliminary test of the control electronics at INAF - Astronomical Observatory of Capodimonte (Napoli), the two main control cabinets of SOXS are now hosted in Padova, connected to the real hardware. This contribution describes the final electronic cabinets layout, the control strategy and the different integration phases, waiting for the Preliminary Acceptance in Europe and the installation of the instrument in Chile.
The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph, in the range 0.80-2.00 μm with 15 orders, equipped with an 2k x 2k Hawaii H2RG IR array from Teledyne, working at 40K, that is currently assembled and tested on the SOXS instrument, in the premises of INAF in Padova. We describe the different tests and results of the cryo, vacuum, opto-mechanics and detector subsystems that finally will be part of the PAE by ESO.
This paper presents the opto-mechanical integration and alignment, functional and optical performance verification of the NIR arm of Son Of X-Shooter (SOXS) instrument. SOXS will be a single object spectroscopic facility for the ESO-NTT 3.6-m telescope, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2050 nm with a mean resolving power R≈4500. In particular the NIR arm is a cryogenic echelle cross-dispersed spectrograph spanning the 780-2050 nm range. We describe the integration and alignment method performed to assemble the different opto-mechanical elements and their installation on the NIR vacuum vessel, which mostly relies on mechanical characterization. The tests done to assess the image quality, linear dispersion and orders trace in laboratory conditions are summarized. The full optical performance verification, namely echellogram format, image quality and resulting spectral resolving power in the whole NIR arm (optical path and science detector) is detailed. Such verification is one of the most relevant prerequisites for the subsequent full instrument assembly and provisional acceptance in Europe milestone, foreseen in 2024.
SOXS (Son Of X-Shooter) will be the new medium-resolution (R 4500 for 1” slit), high-efficiency, wide-band spectrograph for the ESO NTT at La Silla Observatory, Chile. It will be dedicated to the follow-up of any kind of transient events, ensuring fast time, high efficiency, and availability. It consists of a central structure (common path) that supports two spectrographs optimized for the UV-Visible and a Near-Infrared range. Attached to the common path is the Acquisition and Guiding Camera system (AC), equipped with a filter wheel that can provide science-grade imaging and moderate high-speed photometry. The AC Unit was integrated and aligned during the summer months of 2022 and has since been mounted in the NTT’s telescope simulator. This work gives an update on the Acquisition Camera Unit status, describes the Image Quality Tests that were performed, and discusses the AC Optical Performance.
The discovery of a fair sample of Earth-analogues (Earth 2.0’s), i.e. rocky, Earth-mass exoplanets orbiting a Solar-type star in that host star’s habitable zone, and a subsequent search of evidence of bioactivity on those Earth 2.0’s by the detection of biogenically produced molecules in those exoplanetary atmospheres, are two of the most urgent observational programs in astrophysics and science in general. To identify an Earth 2.0, it is necessary to measure the reflex motion radial velocity amplitude of the host star at the 10 cm/sec level, a precision considerably below that which is currently achievable with existing instruments. The follow-on project to search for the biomarkers in an Earth 2.0’s atmosphere may require an effective planet/star contrast of 10-10, again well below the currently achievable level. In this paper, we discuss technical innovations in the implementation of the GMT-Consortium Large Earth Finder (G-CLEF) spectrograph that will enable these observational objectives. We discuss plans to operate G-CLEF at the Magellan Clay telescope with the MagAO-X adaptive optics system and subsequently with GMagAO-X at the Giant Magellan Telescope (GMT).
The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R∼4500 for a 1” slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).
SOXS (Son Of X-Shooter) is the new ESO instrument that is going to be installed on the 3.58-m New Technology Telescope at the La Silla Observatory. SOXS is a single object spectrograph offering a wide simultaneous spectral coverage from U- to H-band. Although such an instrument may have potentially a large variety of applications, the consortium designed it with a clear science case: it is going to provide the spectroscopic counterparts to the ongoing and upcoming imaging surveys, becoming one of the main follow-up instruments in the Southern hemisphere for the classification and characterization of transients. The NTT+SOXS system is specialized to observe all transients and variable sources discovered by imaging surveys with a flexible schedule maintained by the consortium, based on a remote scheduler which will interface with the observatory software infrastructure. SOXS is realized timely to be highly synergic with transients discovery machines like the Vera C. Rubin Observatory. The instrument has been integrated and tested in Italy, collecting and assembling subsystems coming from all partners spread over six countries in three continents. The first preparatory activities in Chile have been completed at the telescope. This article gives an updated status of the project before the shipping of the instrument to Chile.
The SOXS spectrograph, designed for the ESO NTT telescope, operates in both the optical (UV-VIS: 350-850 nm) and NIR (800-2000 nm) bands. This article provides an overview of the final tests conducted on the UV-VIS camera system using a telescope simulator. It details the system’s performance evaluation, including key metrics such as gain, readout noise, and linearity, and highlights the advancements made in the upgraded acquisition system. The testing process, conducted in the Padua laboratory, involved comprehensive simulations of the telescope environment to ensure the results closely resemble those expected at the ESO-NTT telescope. The successful completion of these tests confirms the system’s readiness for deployment to Chile, where it will be installed on the NTT telescope, marking a significant milestone in the SOXS project.
We present the updated design of HighSpec, a high-resolution R ∼ 20, 000 spectrograph designed for the Multi Aperture Spectroscopic Telescope (MAST). HighSpec offers three observing modes centered at the Ca II H&K, Mgb triplet, and Hα lines. Each mode is supported by a highly optimized ion-etched grating, contributing to an instrument exceptional peak efficiency of ≳ 85% for the two latter bands (≳ 55% for the Ca II H&K band). Optimizing throughput over wavelength coverage (Δλ = 10−17 nm), HighSpec enables the precise measurement of spectral lines from faint targets. This approach is especially relevant for stellar object studies, specifically of WDs, which are intrinsically faint and have few spectroscopic lines. Each observing mode was tailored to target spectral features essential for WD research. Its integration with MAST, an array of 20 custom-designed telescopes that can function as a single large telescope (equivalent to a 2.7m telescope in collecting area) or multiplexing over the entire sky, provides unique adaptability for extensive and effective spectroscopic campaigns. Currently in its final assembly and testing stages, HighSpec’s on-sky commissioning is scheduled for 2025.
SOXS (Son Of X-Shooter) is a single object spectrograph built by an international consortium for the ESO NTT telescope. SOXS is based on the heritage of the X-Shooter at the ESO-VLT with two arms (UV-VIS and NIR) working in parallel, with a Resolution-Slit product ≈ 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. SOXS will carry out rapid and long-term Target of Opportunity requests on a variety of astronomical objects. The SOXS vacuum and cryogenic control system has been designed to evacuate, cool down and maintain the UV-VIS detector and the entire NIR spectrograph to their operating temperatures. The design chosen allows the two arms to be operated independently. This paper describes the final design of the cryo-vacuum control system, its functionalities and the tests performed in the integration laboratories.
We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58-m telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nm with a mean resolving power R≈4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follow up of astrophysical transients, with a very wide pool of targets available from the streaming services of wide-field telescopes, current and future. This instrument will serve a variety of scientific scopes in the astrophysical community, with each scope eliciting its specific requirements for observation planning, that the observing scheduler has to meet. Due to directions from the European Southern Observatory (ESO), the instrument will be operated only by La Silla staff, with no astronomer present on the mountain. This implies a new challenge for the scheduling process, requiring a fully automated algorithm that should be able to present the operator not only with and ordered list of optimal targets, but also with optimal back-ups, should anything in the observing conditions change. This imposes a fast-response capability to the scheduler, without compromising the optimization process, that ensures good quality of the observations. In this paper we present the current state of the scheduler, that is now almost complete, and of its web interface.
The Son-Of-XShooter (SOXS) is a single object spectrograph (UV-VIS & NIR) and acquisition camera scheduled to be mounted on the European Southern Observatory (ESO) 3.58-m New Technology Telescope at the La Silla Observatory. Although the underlying data reduction processes to convert raw detector data to fully-reduced science ready data are complex and multi-stepped, we have designed the SOXS Data Reduction pipeline with the core aims of providing end-users with a simple-to-use, well-documented command-line interface while also allowing the pipeline to be run in a fully automated state; streaming reduced data into the ESO Science Archive Facility (SAF) without need for human intervention. To keep up with the stream of data coming from the instrument, there is the requirement to optimise the software to reduce each observation block of data well within the typical observation exposure time. The pipeline is written in Python 3 and has been built with an agile development philosophy that includes CI and adaptive planning.
We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashboard to be used by the operation support team. The system is designed to constantly and actively monitor the Key Performance Indicators (KPI) metrics, as much automatically as possible, reducing the overhead on the support and operation teams. Moreover, we will also detail about the interface designed to inject quality checks metrics from the automated SOXS Pipeline (Young et al. 2022).
The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the progress in the AIT phase of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems that finally converged at the INAF-OAB premises in Merate (Italy), where the spectrograph is currently being assembled and tested, before the final assembly on SOXS.
SOXS (Son Of X-Shooter) will be the new double-armed spectrograph for the ESO NTT at La Silla and it will be optimized to provide an unique specialized facility to follow up and classify any kind of transient events. It consists of a central structure (common path) which supports two spectrographs optimized for the UV-Visible and a Near-IR range. Attached to the common path there is the Acquisition and Guiding Camera System (ACS), equipped with a filter wheel which can provide some science grade imaging and moderate high speed photometry. The project is currently in its Assembly Integration and Verification phase following a modular approach so that each sub-system can be integrated in parallel before their final assembly at system level, foreseen at the INAF Osservatorio Astronomico di Padova (Italy). The optics and the mechanical parts of the ACS arrived in the second semester of 2021, so from that moment the Assembly and Verification Phase began. This work presents the assembly and testing operation of the ACS of SOXS and we report the strategy and the results achieved to meet the requirements.
SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on the Target of Opportunity concept. SOXS is going to be a fundamental spectroscopic partner for any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. This paper gives an updated status of the project, when the instrument is in the advanced phase of integration and testing in Europe, prior to the activities in Chile.
The Son Of X-Shooter (SOXS) is a two-channel spectrograph along with imaging capabilities, characterized by a wide spectral coverage (350nm to 2000nm), designed for the NTT telescope at the La Silla Observatory. Its main scientific goal is the spectroscopic follow-up of transients and variable objects. The UV-VIS arm, of the Common Path sub-system, is characterized by the presence of a powered Atmospheric Dispersion Corrector composed (ADC) by two counter-rotating quadruplets, two prisms, and two lenses each. The presence of powered optics in both the optical groups represents an additional challenge in the alignment procedures. We present the characteristics of the ADC, the analysis after receiving the optics from the manufacturer, the emerging issues, the alignment strategies we followed, and the final results of the ADC in dispersion and optical quality.
The Son Of X-Shooter (SOXS) is the new two-channel (UV-VIS and NIR) spectrograph and imaging capabilities, covering wavelength regimes from 350 nm to 2000nm for the ESO NTT at La Silla. SOXS is optimized for the classification and follow-up of transient events. SOXS consortium has a relatively large geographic spread, and therefore the AIV of this medium-class instrument follows a modular approach. Each of the five main sub-systems of SOXS, namely the Common Path, the Calibration Unit, the Acquisition Camera, UV-VIS Spectrograph, and the NIR Spectrograph, are undergoing internal alignment and testing in the respective consortium institutes. INAF-Osservatorio Astronomico di Padova delivers the Common Path (CP) sub-system, which is the backbone of the entire instrument. We report the Common Path internal alignment starting from the assembly of the individual components to the final testing of the optical quality and the efficiency of the complete sub-system.
The GMT-Consortium Large Earth Finder (G-CLEF) is a fiber-fed, optical echelle spectrograph that will be a first light instrument for the Giant Magellan Telescope (GMT). G-CLEF is a general-purpose echelle spectrograph with precision radial velocity (PRV) capability. The radial velocity (RV) precision goal of G-CLEF is 10 cm/sec; necessary for detection of Earth-sized exoplanets orbiting Solar-type stars in their habitable zone. This imposes challenging stability requirements on the optical mounts and spectrograph support structures especially when considering the instrument’s operational environment. G-CLEF’s accuracy will be influenced by thermal effects, ambient air pressure, vibration, and micro gravity vector variations caused by normal telescope slewing. The design and fabrication schedule for the G-CLEF spectrograph and ancillary systems will lead the GMT telescope by approximately 5 years, therefore, we will design and build an interim installation configuration for G-CLEF at Magellan’s 6.5m telescopes. This will allow us to complete and commission the spectrograph. During this period, we will collect at least 5 years of data at Magellan from roughly 2025 to 2030. We will also optimize major subsystems including; spectrograph optics and mechanics, vacuum systems, thermal control, and vibration isolation. G-CLEF completed its Critical Design Phase for the GMT configuration in 2018. In this paper, we provide an update on the G-CLEF spectrograph’s opto-mechanical design, including the GMT front end assembly. We also provide an update on our current fabrication status including procurement of camera optics, reflective optics, carbon-fiber optical bench, camera optical mounts, and vacuum chamber assembly. We also discuss adaptations required to support the interim deployment at Magellan.
SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 µm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is mainly composed of five different optomechanical subsystems and four other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling system). In this paper, a brief overview of all the subsystems and tools is presented here together with the acceptance results of the various mechanical elements, the experiments performed to validate the functionality of the subsystems, and the mechanical integration procedure.
SOXS (SOn of X-Shooter) is a high-efficiency spectrograph with a mean Resolution-Slit product of ∼ 3500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. We present an overview of the flow from the scientific to the technical requirements, and the realization of the sub-systems. Further, we give an overview of the methodologies used for planning and managing the assembly of the sub-systems, their integration and tests before the acceptance of the instrument in Europe (PAE) along with the plan for the integration of SOXS to the NTT. SOXS could be used as an example for the system engineering of an instrument of moderate complexity, with a large geographic spread of the team.
SOXS is the new spectrograph for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the final design of the visible camera cryostats, the test facilities for the CCD characterization, and the first results with the scientific detector. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO Continuous Flowing Cryostat (CFC) cooling system and the New General Detector Controller (NGC) developed by ESO. The laboratory facility is based on an optical bench equipped with a Xenon lamp, filter wheels to select the wavelength, an integrating sphere, and a calibrated diode to measure the flux. This paper outlines the visible camera cryostat, the test facilities for the CCD characterization and the first results with the scientific detector in the laboratory and after the integration to the instrument.
This paper describes the deployment of the GMT-Consortium Large Earth Finder (G-CLEF) at the Clay telescope, one of the two Magellan telescopes, in late 2025, moving to the GMT in 2030. G-CLEF is a fiber-fed, ultra-high stability optical band echelle spectrograph designed for extremely precise stellar radial velocity measurement. On the Magellan Clay telescope, G-CLEF will take spectra with resolution up to ~300,000, fully resolving molecular spectral features and opening totally new discovery space for exoplanet atmosphere composition studies. G@M will also be coupled to the Magellan extreme adaptive optics facility, MagAO-X which will allow it to spatially resolve several exoplanets from their host stars. We provide a system description of the G@M instrument as it will be configured at Magellan. A top-level review of optomechanics, electronics and control systems follows, as well as a description of several risk-reduction exercises the team has undertaken.
KEYWORDS: Device simulation, Near infrared, Calibration, Spectrographs, Lamps, Telescopes, Point spread functions, Signal to noise ratio, Optical simulations, Modeling and simulation
We present the progresses of the simulation tools, the Exposure Time Calculator (ETC) and End-to-End simulator (E2E), for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58-m telescope. The SOXS will be a single object spectroscopic facility, made by a two-arms high-efficiency spectrograph, able to cover the spectral range 350-2000 nm with a mean resolving power R≈4500. While the purpose of the ETC is the estimate, to the best possible accuracy, of the Signal-to-Noise ratio (SNR), the E2E model allows us to simulate the propagation of photons, starting from the scientific target of interest, up to the detectors. We detail the ETC and E2E architectures, computational models and functionalities. The interface of the E2E with external simulation modules and with the pipeline are described, too. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented.
SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling). It is currently in the procurement and integration phase. In this paper we present the post-FDR modifications in the mechanical design due to the various iterations with the manufacturers and the actual procurement status. The last part describes the strategy used to keep under control the mechanical interfaces between the subsystems.
KEYWORDS: Optical alignment, Spectrographs, Image quality, Thermography, New and emerging technologies, Telescopes, Lanthanum, Temperature metrology, Thermal effects, Near infrared
SOXS (Son Of X-Shooter) is the new medium resolution wide-band spectrograph to be installed at the 3.6m New Technology Telescope (NTT) in La Silla. SOXS will offer simultaneous wavelength coverage from 0.35 to 2.0 μm and will be dedicated to the study of transient and variable sources. While nominal optical performances of the system were presented in previous proceedings (Zanmar Sanchez et al. 2018), we here present a set of further analyses aimed to identify and quantify optical effects, due to changes in temperature and orientation of the instrument during alignment and operations.
SOXS will be the new spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands by using two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the development status of the visible camera cryostat, the architecture of the acquisition system and the progress in the electronic design. The UV-VIS detector system is based on a CCD detector 44-82 from e2v, a custom detector head, coupled with the ESO continuous flow cryostats (CFC), a custom cooling system, based on a Programmable Logic Controller (PLC), and the New General Controller (NGC) developed by ESO. This paper outlines the development status of the system, describes the design of the different parts that make up the UV- VIS arm and is accompanied by a series of information describing the SOXS design solutions in the mechanics and in the electronics parts. The first tests of the detector system with the UV-VIS camera will be shown.
SOXS (Son Of X-Shooter) is a single object spectrograph, characterized by offering a wide simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.6-m ESO New Technology Telescope at the La Silla Observatory, in the Southern part of the Chilean Atacama Desert. The consortium is focussed on a clear scientific goal: the spectrograph will observe all kind of transient and variable sources discovered by different surveys with a highly flexible schedule, updated daily, based on the Target of Opportunity concept. It will provide a key spectroscopic partner to any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. SOXS will study a mixture of transients encompassing all distance scales and branches of astronomy, including fast alerts (such as gamma-ray bursts and gravitational waves), mid-term alerts (such as supernovae and X-ray transients), and fixed-time events (such as the close-by passage of a minor planet or exoplanets). It will also have the scope to observe active galactic nuclei and blazars, tidal disruption events, fast radio bursts, and more. Besides of the consortium programs on guaranteed time, the instrument is offered to the ESO community for any kind of astrophysical target. The project has passed the Final Design Review and is currently in manufacturing and integration phase. This paper describes the development status of the project.
SOXS (Son Of X-Shooter) is a forthcoming instrument for ESO-NTT, mainly dedicated to the spectroscopic study of transient events and is currently starting the AIT (Assembly, Integration, and Test) phase. It foresees a visible spectrograph, a near-Infrared (NIR) spectrograph, and an acquisition camera for light imaging and secondary guiding. The optimal setup and the monitoring of SOXS are carried out with a set of software-controlled motorized components and sensors. The instrument control software (INS) also manages the observation and calibration procedures, as well as maintenance and self-test operations. The architecture of INS, based on the latest release of the VLT Software (VLT2019), has been frozen; the code development is in an advanced state for what concerns supported components and observation procedures, which run in simulation. In this proceeding we present the INS current status, focusing in particular on the ongoing efforts in the support of two non-standard, “special” devices. The first special device is the piezoelectric slit exchanger for the NIR spectrograph; the second special device is the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument. For both, which are commanded via a serial line, specific driver and simulators have been implemented.
KEYWORDS: Control systems, Electronics, Near infrared spectroscopy, UV-Vis spectroscopy, Spectroscopes, New and emerging technologies, Telescopes, Lanthanum, Near infrared, Manufacturing
The forthcoming SOXS (Son Of X-Shooter) will be a new spectroscopic facility for the ESO New Technology Telescope in La Silla, focused on transient events and able to cover both the UV-VIS and NIR bands. The instrument passed the Final Design Review in 2018 and is currently in manufacturing and integration phase. This paper is focused on the assembly and testing of the instrument control electronics, which will manage all the motorized functions, alarms, sensors, and electric interlocks. The electronics is hosted in two main control cabinets, divided in several subracks that are assembled to ensure easy accessibility and transportability, to simplify test, integration and maintenance. Both racks are equipped with independent power supply distribution and have their own integrated cooling systems. This paper shows the assembly strategy, reports on the development status and describes the tests performed to verify the system before the integration into the whole instrument.
KEYWORDS: Telescopes, Cameras, Spectrographs, New and emerging technologies, Lanthanum, Observatories, Near infrared, Spectral resolution, Calibration, Imaging systems
SOXS (Son Of X-Shooter) will be the new medium resolution (R∼4500 for 100 slit), high-efficiency, wide band spectrograph for the ESO NTT at La Silla, optimized for classification and follow-up of transient events. SOXS will simultaneously cover UV-optical and NIR bands (0.35-2.00 micron) using two different arms and a pre-slit Common Path feeding system. The instrument will be also equipped by a Calibration Unit and an Acquisition Camera (AC) System. In this paper we present the final opto-mechanical design for the AC System and we describe its development status. The project is currently in manufacturing and integration phases.
We present the development of the End-to-End simulator for the SOXS instrument at the ESO-NTT 3.5-m telescope. SOXS will be a spectroscopic facility, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2000 nm with resolving power R≈4500. The E2E model allows to simulate the propagation of photons starting from the scientific target of interest up to the detectors. The outputs of the simulator are synthetic frames, which will be mainly exploited for optimizing the pipeline development and possibly assisting for proper alignment and integration phases in laboratory and at the telescope. In this paper, we will detail the architecture of the simulator and the computational model, which are strongly characterized by modularity and flexibility. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented.
We present here the development status of the NIR spectrograph of the Son Of X-Shooter (SOXS) instrument, for the ESO/NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 μm. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic echelle-dispersed spectrograph, working in the range 0.80-2.00 μm, equipped with a Hawaii H2RG IR array from Teledyne. The whole spectrograph will be cooled down to about 150 K (but the array at 40 K), to lower the thermal background, and equipped with a thermal filter to block any thermal radiation above 2.0 μm. In this work, we will show the advanced phase of integration of the NIR spectrograph.
Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of ~4500 over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph, and the Acquisition Camera) connected by the Common Path system to the NTT, and the Calibration Unit. The Common Path is the backbone of the instrument and the interface to the NTT Nasmyth focus flange. The instrument project went through the Final Design Review in 2018 and is currently in Assembly Integration and test (AIT) Phase. This paper outlines the observing modes of SOXS and the efficiency of each subsystem and the laboratory test plan to evaluate it.
Son Of X-Shooter (SOXS) is a double-armed (UV-VIS, NIR) spectrograph designed to be mounted at the ESO-NTT in La Silla, now in its Assembly Integration and Verification (AIV) phase. The instrument is designed following a modular approach so that each sub-system can be integrated in parallel before their assembly at system level. INAF-Osservatorio Astronomico di Padova will deliver the Common Path (CP) sub-system, which represents the backbone of the entire instrument. In this paper, we describe the foreseen operation for the CP alignment and we report some results already achieved, showing that we envisaged the suitable setup and the strategy to meet the opto-mechanical requirements.
We present our progress on the UV-VIS arm of Son Of X-Shooter (SOXS), a new spectrograph for the NTT. Our design splits the spectral band into four sub-bands that are imaged onto a single detector. Each band uses an optimized high efficiency grating that operates in 1st order (m=1). In our previous paper we presented the concept and preliminary design. SOXS passed a Final Design Review in July 2018 and is well into the construction phase. Here we present the final design, performances of key manufactured elements, and the progress in the assembly. Based on the as-built elements, the expected throughput of the visual arm will be < 55%. This paper is accompanied by a series of contributions describing the progress made on the SOXS instrument.
KEYWORDS: Data archive systems, Data conversion, Near infrared, Telescopes, Calibration, Spectrographs, Cameras, New and emerging technologies, Lanthanum, Sensors
The Son-Of-X-shooter (SOXS) is a dual arm spectrograph (UV-VIS and NIR) and Acquisition Camera (AC) due to mounted on the European Southern Observatory (ESO) 3.6m New Technology Telescope (NTT) in La Silla. Designed to simultaneously cover the optical and NIR wavelength range from 350-2050 nm, the instrument will be dedicated to the study of transient and variable events with many Target of Opportunity requests expected. The goal of the SOXS Data Reduction pipeline is to use calibration data to remove all instrument signatures from the SOXS scientific data frames for each of the supported instrument modes, convert this data into physical units and deliver them with their associated error bars to the ESO Science Archive Facility (SAF) as Phase 3 compliant science data products, all within 30 minutes. The primary reduced product will be a detrended, wavelength and flux calibrated, telluric corrected 1D spectrum with UV-VIS + NIR arms stitched together. The pipeline will also generate Quality Control (QC) metrics to monitor telescope, instrument and detector health. The pipeline is written in Python 3 and has been built with an agile development philosophy that includes adaptive planning and evolutionary development. The pipeline is to be used by the SOXS consortium and the general user community that may want to perform tailored processing of SOXS data. Test driven development has been used throughout the build using ‘extreme’ mock data. We aim for the pipeline to be easy to install and extensively and clearly documented.
SOXS is a new spectrograph for the New Technology Telescope (NTT), optimized for transient and variable objects, covering a wide wavelength range from 350 to 2000 nm. SOXS is equipped with a calibration unit that will be used to remove the instrument signatures and to provide wavelength calibration to the data. The
calibration unit will employ seven calibration lamps: a quartz-tungsten-halogen and a deuterium lamp for the that will be used to remove the instrument signatures and to provide wavelength calibration to the data. The calibration unit will employ seven calibration lamps: a quartz-tungsten-halogen and a deuterium lamp for the flat-field correction, a ThAr lamp and four pencil-style rare-gas lamps for the wavelength calibration. The light from the calibration lamps is injected into the spectrograph mimicking the f/11 input beam of the NTT, by using an integrating sphere and a custom doublet. The oversized illumination patch covers the length of the spectrograph slit homogeneously, with < 1% variation. The optics also supports the second mode of the unit, the star-simulator mode that emulates a point source by utilizing a pinhole mask. Switching between the direct illumination and pinhole modes is performed by a linear stage. A safety interlock switches off the main power when the lamp box cover is removed, preventing accidental UV exposure to the service personnel. All power supplies and control modules are located in an electronic rack at a distance from the telescope platform. In this presentation we describe the optical, mechanical, and electrical designs of the SOXS calibration unit, and report the status of development in which the unit is currently in the test and verification stage.
KEYWORDS: Electronics, Control systems, Switches, Photonic integrated circuits, Computer programming, Near infrared, Data transmission, Sensors, Power supplies, Spectrographs
SOXS (Son Of X-Shooter) is a unique spectroscopic facility that will operate at the ESO New Technology Telescope (NTT) in La Silla from 2021 onward. The spectrograph will be able to cover simultaneously the UV-VIS and NIR bands exploiting two different arms and a Common Path feeding system. We present the design of the SOXS instrument control electronics. The electronics controls all the movements, alarms, cabinet temperatures, and electric interlocks of the instrument. We describe the main design concept. We decided to follow the ESO electronic design guidelines to minimize project time and risks and to simplify system maintenance. The design envisages Commercial Off-The-Shelf (COTS) industrial components (e.g. Beckhoff PLC and EtherCAT fieldbus modules) to obtain a modular design and to increase the overall reliability and maintainability. Preassembled industrial motorized stages are adopted allowing for high precision assembly standards and a high reliability. The electronics is kept off-board whenever possible to reduce thermal issues and instrument weight and to increase the accessibility for maintenance purpose. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the work and is part of a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review.
Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of 4500 (goal 5000) over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT and the Calibration Unit. The Common Path is the backbone of the instrument and the interface to the NTT Nasmyth focus flange. The light coming from the focus of the telescope is split by the common path optics into the two different optical paths in order to feed the two spectrographs and the acquisition camera. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the Common Path system and is accompanied by a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review.
SOXS (Son of X-Shooter) will be the new medium resolution (R~4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with the best possible response time in addition to high efficiency and availability. Furthermore, a Calibration Unit and an Acquisition Camera System with all the necessary relay optics will be connected to the Common Path sub-system. The Acquisition Camera, working in optical regime, will be primarily focused on target acquisition and secondary guiding, but will also provide an imaging mode for scientific photometry. In this work we give an overview of the Acquisition Camera System for SOXS with all the different functionalities. The optical and mechanical design of the system are also presented together with the preliminary performances in terms of optical quality, throughput, magnitude limits and photometric properties.
The Son Of X-Shooter (SOXS)1 is a medium resolution spectrograph (R ~ 4500) proposed for the ESO 3.6m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m = 1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element catadioptric camera. The expected throughput of our design is > 60% including contingency. The SOXS collaboration expects first light in early 2021. This paper is one of several papers presented in these proceedings2-10 describing the full SOXS instrument.
Son Of X-Shooter (SOXS) is the new instrument for the ESO 3.5 m New Technology Telescope (NTT) in La Silla site (Chile) devised for the spectroscopic follow-up of transient sources. SOXS is composed by two medium resolution spectrographs able to cover the 350-2000 nm interval. An Acquisition Camera will provide a light imaging capability in the visible band. We present the procedure foreseen for the Assembly, Integration and Test activities (AIT) of SOXS that will be carried out at sub-systems level at various consortium partner premises and at system level both in Europe and Chile.
SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from different surveys. These will be a mixture of fast alerts (e.g. gamma-ray bursts, gravitational waves, neutrino events), mid-term alerts (e.g. supernovae, X-ray transients), fixed time events (e.g. close-by passage of minor bodies). While the focus is on transients and variables, still there is a wide range of other astrophysical targets and science topics that will benefit from SOXS. The design foresees a spectrograph with a Resolution-Slit product ≈ 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. The limiting magnitude of R~20 (1 hr at S/N~10) is suited to study transients identified from on-going imaging surveys. Light imaging capabilities in the optical band (grizy) are also envisaged to allow for multi-band photometry of the faintest transients. This paper outlines the status of the project, now in Final Design Phase.
SOXS (Son of X-shooter) is a wide band, medium resolution spectrograph for the ESO NTT with a first light expected in early 2021. The instrument will be composed by five semi-independent subsystems: a pre-slit Common Path (CP), an Acquisition Camera (AC), a Calibration Unit (CU), the NIR spectrograph, and the UV-VIS spectrograph. In this paper, we present the mechanical design of the subsystems, the kinematic mounts developed to simplify the final integration procedure and the maintenance. The concept of the CP and NIR optomechanical mounts developed for a simple pre- alignment procedure and for the thermal compensation of reflective and refractive elements will be shown.
An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 ion-etched high efficiency transmission gratings. The NIR (800- 2000 nm) arm adopts the ‘4C’ design (Collimator Correction of Camera Chromatism) successfully applied in X-Shooter. Other optical sub-systems are the imaging Acquisition Camera, the Calibration Unit and a pre-slit Common Path. We describe the optical design of the five sub-systems and report their performance in terms of spectral format, throughput and optical quality. This work is part of a series of contributions1-9 describing the SOXS design and properties as it is about to face the Final Design Review.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.