P. De Dobbelaere, G. Armijo, J. Balardeta, B. Chase, Y. Chi, A. Dahl, Y. De Koninck, S. Denton, M. Eker, S. Fathpour, D. Foltz, F. Gholami, S. Gloeckner, K. Hon, S. Hovey, S. Jackson, W. Li, Y. Liang, M. Mack, G. Masini, G. McGee, A. Mekis, S. Pang, M. Peterson, T. Pinguet, L. Planchon, K. Roberson, S. Sahni, J. Schramm, M. Sharp, C. Sohn, K. Stechschulte, P. Sun, G. Vastola, S. Wang, B. Weber, G. Wong, K. Yokoyama, S. Yu, R. Zhou
In this paper we discuss design and characterization of silicon-photonics-based 100 Gbps (4×26 Gbps) transceivers for parallel single mode fiber communication. We also address some key underlying technologies including silicon photonics wafer processing, photonic device libraries, light source integration and packaging technologies.
We report on the performance of an integrated four-channel parallel optical transceiver built in a CMOS photonics
process, operating at 28 Gb/s per channel. The optical engine of the transceiver comprises a single silicon die and a
hybrid integrated DFB laser. The silicon die contains the all functionalities needed for an optical transceiver: transmitter
and receiver optics, electrical driver, receiver and control circuits. We also describe the CMOS photonics platform used
to build such transceiver device, which consists of: an optically enabled CMOS process, a photonic device library, and a
design infrastructure that is modeled after standard circuit design tools. We discuss how this platform can scale to higher
speeds and channel counts.
We report on the development of single-chip, monolithically-integrated 40 Gbps transceivers built in a 130 nm SOI
CMOS process as part of Phase II of the DARPA EPIC program. In this talk we give an overview of the system
architecture, including the transmit and receive paths as well as the control systems. We report on the performance of
the individual building blocks, and discuss a scaling to 100 Gbps and beyond single-chip transceivers built in CMOS
photonics.
We present our approach to a low-cost, highly scalable opto-electronic integration platform based on a commercial
CMOS process. In this talk, we detail the performance of the device library elements and highlight performance trade-offs
encountered in monolithically integrating optical and electronic circuits. We describe an opto-electronic integrated
circuit (OEIC) design toolkit modeled after the standard electronic design flow, which includes automated design rule
checking (DRC) and layout-versus-schematic (LVS) checks covering all types of circuit elements. As an example of
integration, we detail the design of a multi-channel transceiver chip with 10 Gbps/channel optical data transmission
speed and report on its performance.
Design, manufacture and reliability of 2D MEMS optical switches
2D Optical switches are an ideal solution for several optical switching applications in telecommunications including optical cross-connects, reconfigurable optical add-drop multiplexers and fiber-optic protection switching and monitoring. In this paper we address aspects of the design and manufacturing of 2D MEMS based optical switches. Important design areas such as MEMS, optics, packaging and optical performance are discussed. Reliability is an extremely important aspect for all devices used in telecom systems. We will address potential reliability issues as well as their resolution and verification.
Fiber-optic switches become more and more appealing components not only in the field of optical communication, but also in measurement systems, sensors and data storage. We have developed a number of concepts for fiber optic switches, all based on different types of special microoptical components, actuated by miniaturized mechanical systems, primarily piezoelectric actuators. We present microoptical configurations and discuss their potential for the creation of different types of miniaturized switches.
Microprisms play an important role in a number of micro- optical systems for beam shaping and beam deflection. The task of the prisms is to deflect a beam selectively in order to bring it into an other optical channel of the system or to redirect a beam in the way that the redirected beam propagates parallel with respect to the optical axis of subsequent optical elements. We derive general requirements for microprisms for these applications and discuss some experimental results.
Using technologies such as replication or batch-fabrication, a number of micro-optical elements can be fabricated with low costs. However, as the realization of complex optical functions, for instance beam shaping and beam deflection, often requires several optical components, the mounting effort increases dramatically. It makes sense to emphasize the system aspects already in the design work. With the help of some examples for micro-optical fiber switches and modulators driven by piezoelectric actuators, we demonstrate that the combination of gradient-index optics with planar surfaces and replicated optical elements like micro-prisms, lens arrays on these surfaces can be an important step in the system integration.
The utilization of micro-optical components in systems for optical beam deflection and modulation offers the possibility for realization of miniaturized switches and scanners. As the required displacement of the micro-optical components for efficient beam manipulation is quite small, high speed actuators with small electrical power consumption can be used. We present micro-optical configurations and discuss their potential for the creation of different types of miniaturized switches. The combination of micro-optical components already available and semiclassical piezoelectric actuators leads to new types of switching and modulation systems for a very broad spectrum of applications.
Fiber-optic switches become more and more appealing components not only in the field of optical communication, but also in measurements systems, sensors and data storage. We have developed a number of concepts for fiber-optic switches, all based on different types of special micro-optical components, actuated by miniaturized mechanical systems, primarily piezoelectric actuators. We present micro-optical configurations and discuss their potential for the creation of different-types of miniaturized switches. Keywords: micro-optics, micro-optical switches, piezoelectric actuators
External modulators and switches for multimode fiber transmission systems are required for aplenty of applications in optical metrology and communication systems. We show that a confocal arrangement of microlens arrays with certain filter elements in the common focal plane of the arrays, which are moved with the help of piezoelectrical actuators, is a very simple and flexible concept to meet the needs of a number of very different applications. The focal length, lens pitch and width of the arrays have to be chosen properly. We discuss which optical elements are required for certain applications. We present experiments for an intensity modulator.
The utilization of micro-optical components in systems for optical beam deflection and modulation offers the possibility for realization switches and scanners. As the required displacement of the micro-optical components for efficient beam manipulation is quite small, high speed actuators with small electrical power consumption can be used. We present a variety of micro-optical configurations and discuss their potential for the creation of different types of miniaturized scanners and switches. The combination of micro-optical components already available and semiclassical piezoelectric actuators leads to new types of switching and modulation systems for a very broad spectrum of applications.
The utilization of micro-optical components in systems for optical beam deflection and modulation offers the possibility for realization of miniaturized switches and scanners. As the required displacement of the micro-optical components for efficient beam manipulation is quite small, high speed actuators with small electrical power consumption can be used. We present a variety of micro-optical configurations and discuss their potential for the creation of different types of miniaturized scanners, switches and modulators. First experimental results and even prototypes of modulators and switches have been achieved, indicating that the combination of micro-optical components already available and semiclassical piezoelectric actuators leads to new types of switching and modulation systems for a very broad spectrum of applications.
Using the principle of focussing an incoming beam onto a plane with special optical microstructures, novel miniaturized switching elements can be built up for different applications. As switching is achieved by a lateral movement of the microstructures, only small displacements (about 10 micrometers ) are sufficient for efficient beam manipulation. In this paper, we present the results of both theoretical and experimental investigations on a concept of multichannel beam deflection by microprisms located in the focal plane of an incoming beam. This concept is suitable for singlemode fiber switches. It is shown that nearly aberration free operation can be achieved by choosing the right substrate thickness and the axial focal position with respect to the microprisms for the cases of placing them on the front or rear substrate surface. A trade-off must be made between the numerical aperture of the focussed beam, the prism angles and the number of output channels of the deflecting element in order to achieve sufficient angular separation of the deflected beams. Two different techniques have been tested for microprism fabrication: wet anisotropic etching in silicon and a new method of mask projection onto scanned photoresist layers. Microprisms with sufficient optical quality have been fabricated with both methods. In experimental investigations, we showed that for a singlemode fiber 1 X 9-switch low insertion loss (< 1 dB) and low cross-talk between the output channels (-50 dB) can be obtained.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.