Head-up-displays (HUD) and head-mounted-displays (HMD) have in common to utilize an optical combiner for electronic image creation in a see-through optical setup. Volume holographical optical elements (vHOE) appeal to system designers by their lightweight, thin film construction that also enables concepts to integrate those into lens or windshield manufacturing. vHOEs can be customized towards optical system requirements through their adaptable angular and spectral Bragg selectivity, while also diffraction efficiencies can be widely chosen to meet the overall optical specifications. Photopolymer films (Bayfol® HX film) have been recently introduced into the market place and prove themselves as easy to process materials. In this paper we investigate the impact of incoherent pre-exposure, which is a technique that can be used to overcome oxygen inhibition in a very convenient way. Incoherent light also can be used to reduce the dynamic range of the photopolymer film to fine tune diffraction efficiency and reduce over-modulation of transmission HOEs. Another interesting aspect is to minimize coherent media scatter that can occur at long exposure times. So reduction of the overall applied coherent light dosage is the key here. Incoherent pre-exposure therefore should be considered as an integral part of a holographer’s toolset to perfect the recording results for vHOEs.
Volume Phase Holographic Gratings (VPHGs) cover a relevant position as dispersing elements in spectrographic instrumentations with low and medium resolution. This is due to their unique properties especially in terms of diffraction efficiency. These devices have to provide dispersion, resolving power, bandwidth and diffraction efficiency according to the target scientific and technological cases. Custom gratings can be designed and manufactured to match the requirements and maximize the performances.
The main function of any augmented reality system is to seamlessly merge the real world perception of a viewer with computer generated images and information. Besides real-time head-tracking and room-scanning capabilities the combiner optics, which optically merge the natural with the artificial visual information, represent a key component for those systems. Various types of combiner optics are known to the industry, all with their specific advantages and disadvantages. Beside the well-established solutions based on refractive optics or surface gratings, volume Holographic Optical Elements (vHOEs) are a very attractive alternative in this field. The unique characteristics of these diffractive grating structures - being lightweight, thin, flat and invisible in Off Bragg conditions - make them perfectly suitable for their use in integrated and compact combiners. For any consumer application it is paramount to build unobtrusive and lightweight augmented reality displays, for which those volume holographic combiners are ideally suited.
Due to processing challenges of (historic) holographic recording materials mass production of vHOE holographic combiners was not possible. Therefore vHOE based combiners found use in military applications only by now. The new Bayfol® HX instant developing holographic photopolymer film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Bayfol® HX provides full color capability and adjustable diffraction efficiency as well as an unprecedented optical clarity when compared to classical holographic recording materials like silver halide emulsions (AgHX) or dichromated gelatin (DCG). Bayfol® HX film is available in industrial scale and quality. Its properties can be tailored for various diffractive performances and integration methods. Bayfol® HX film is easy to process without any need for chemical or thermal development steps, offering simplified contact-copy mass production schemes.
Holographic Optical Elements (HOEs) cover nowadays a relevant position as dispersing elements in astronomical spectrographs because each astronomical observation could take advantage of specific devices with features tailored for achieving the best performances. The design and manufacturing of highly efficient and reliable dispersive elements require photosensitive materials as recording substrate where it is possible to precisely control the parameters that define the efficiency response (namely both the refractive index modulation and the film thickness). The most promising materials in this field are the photopolymers because, beside the ability to provide the tuning feature, they bring also advantages such as self-developing, high refractive index modulation and ease of use thanks to their simple thin structure, which is insensitive from the external environment. In particular, Bayfol HX photopolymers were characterized with the purpose to use them as new material for astronomical Volume Phase Holographic Gratings. We designed and manufactured VPHGs for astronomical instrumentation and we demonstrated how photopolymers are reliable holographic materials for making astronomical devices with performances comparable to those provided by VPHGs based on Dichromated Gelatins (DCGs), but with a much simpler production process. Moreover, the versatility of these materials allowed us to propose and realize novel architectures of the spectroscopic dispersive elements. A compact and unique single prism device was realized for a FOSC spectrograph and new multi-layered devices are proposed, stacking VPHGs one on top of the other to obtain many spectra in the instrument’s detector, with advantages as increase of resolution and signal to noise ratio with respect to the classical single dispersive element.
Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in smart glasses and augmented reality (SG and AR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures – being lightweight, thin and flat – make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications.
Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept, discuss the opto-mechanical construction and outline the downstream process of the installed vHOE replication line. Moreover, we focus on aspects like performance optimization of the copy vHOE, the bleaching process and the suitable choice of protective cover film in the re-lamination step, preparing the integration of the vHOE into the final device.
Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in augmented and virtual reality (AR and VR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures – being lightweight, thin and flat – make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept and discuss the mechanical construction of the installed vHOE replication line. Moreover, we treat aspects like master design, effects of vibration and suppression of noise gratings. Furthermore, digital vHOEs are introduced as master holograms. They enable new ways of optical design and paths to large scale vHOEs.
Volume Phase Holographic Gratings cover a relevant position as transmission dispersing elements in astronomical spectrographs and each astronomical observation could take advantage of specific dispersive elements with features tailored for achieving the best performances. The design and manufacturing of high efficiency and reliable VPHGs require photosensitive materials where it is possible to control both the refractive index modulation and the film thickness. By means of Bayfol® HX photopolymers, we designed and manufactured six VPHGs for astronomical instrumentation in a GRISM configuration. We demonstrated how photopolymers are reliable holographic materials for making astronomical VPHGs with performances comparable to those provided by VPHGs based on Dichromated Gelatins (DCGs), but with a much simpler production process.
The versatility of Volume Holographic Optical Elements (vHOE) is high, especially because of their tunable angular and
spectral Bragg selectivity. Those unique lightweight, thin and flat optical elements are enabled by the new instant
developing photopolymer film Bayfol® HX technology, which allows to mass produce cost effective diffractive optics
due to its simplified and robust holographic recording process.
From a pure scientific point of view volume holography is well established. In practice though, commercially available
optical design software is not adapted to handle the specific characteristics of photopolymer diffractive optical elements
and their recording. To achieve high quality vHOE precision optics, the recording setup needs to accommodate several
aspects that will be covered in this paper. We report on means how to deal with photopolymer shrinkage and average
refractive index changes of the recording media. An important part in diffractive optics design is the compensation of
different conditions between the holographic recording setup and in a final product containing the vHOE. Usually
substrates might need to be changed (in material, in refractive index) as well the illumination sources are using
incoherent light having angular and spectral emission profiles with finite bandwidth.
Recently special in- and out-coupling vHOEs are becoming attractive e.g. in near eye displays and in compact lighting
devices. We will report on design considerations and adjustments to the recording condition for a specific in-coupling
vHOE and demonstrate the effects of pre-compensation on this example.
For a long time volume Holographic Optical Elements (vHOE) have been discussed as an alternative, but were hampered by a lack of suitable materials. They provide several benefits over surface corrugated diffractive optical element like high diffraction efficiency due to their ability to reconstruct a single diffraction order, freedom of optical design by freely setting the replay angles and adjusting their bandwidth by a selection of the vHOE’s thickness. Additional interesting features are related to their high Bragg selectivity providing transparent films for off-Bragg illumination. In this paper we report on our newly developed photopolymer film technology (Bayfol® HX) that uniquely requires no post processing after holographic exposure. We explain the governing non-local polymerization driven diffusion process leading to an active mass transport triggered by constructive interference. Key aspects of the recording process and their impact on index modulation formation is discussed. The influence on photopolymer film thickness on the bandwidth is shown. A comparison between coupled wave theory (CWT) simulation and experimental results is given. There are two basic recording geometries: reflection and transmission vHOEs. We explain consequences of how to record them properly and discuss in more detail the special challenges in transmission hologram recording. Here beam ratio and customization of photopolymer film properties can be applied most beneficially to achieve highest diffraction efficiency.
Volume Holographic Optical Elements (vHOEs) provide superior optical properties over DOEs (surface gratings) due to high diffraction efficiencies in the -1st order and their excellent Bragg selectivity. Bayer MaterialScience is offering a variety of customized instant-developing photopolymer films to meet requirements for a specific optics design of a phase hologram. For instance, the photopolymer film thickness is an ideal means to adjust the angular and the spectral selectivity while the index modulation can be adopted with the film thickness to achieve a specific required dynamic range. This is especially helpful for transmission type holograms and in multiplex recordings. The selection of different substrates is helpful to achieve the overall optical properties for a targeted application that we support in B2B-focused developments. To provide further guidance on how to record volume holograms in Bayfol HX, we describe in this paper a new route towards the recording of substrate guided vHOEs by using optimized photopolymer films. Furthermore, we discuss special writing conditions that are suitable to create higher 2nd harmonic intensities and their useful applications. Due to total internal reflection (TIR) at the photopolymer-air interface in substrate guided vHOEs, hologram recording with those large diffraction angles cannot usually be done with two free-space beams. Edge-lit recording setups are used to circumvent this limitation. However, such setups require bulky recording blocks or liquid bathes and are complex and hard to align. A different approach that we present in this paper is to exploit 2nd harmonic grating generation in a freespace recording scheme. Those 2nd harmonic components allow the replay of diffraction angles that are normally only accessible with edge-lit writing configurations. Therefore, this approach significantly simplifies master recordings for vHOEs with edge-lit functionalities, which later can be used in contact copy schemes for mass replication. In this paper, we will discuss and illustrate recording parameters to influence 2nd harmonic efficiency in optimized photopolymer films and will explain preferred geometries for recording.
Friedrich-Karl Bruder, Thomas Fäcke, Rainer Hagen, Dennis Hönel, Tim Patrick Kleinschmidt, Enrico Orselli, Christian Rewitz, Thomas Rölle, Günther Walze
Volume Holographic Optical Elements (vHOE) offer angular and spectral Bragg selectivity that can be tuned by film thickness and holographic recording conditions. With the option to integrate complex optical function in a very thin plastic layer formerly heavy refractive optics can be made thin and lightweight especially for large area applications like liquid crystal displays, projection screens or photovoltaic. Additionally their Bragg selectivity enables the integration of several completely separated optical functions in the same film. The new instant developing photopolymer film (Bayfol® HX) paves the way towards new cost effective diffractive large optics, due to its easy holographic recording and environmental stability.
A major bottleneck for large area applications has been the master hologram recording which traditionally needs expensive, large high precision optical equipment and high power laser with long coherence length. Further the recording setup needs to be rearranged for a change in optical design.
In this paper we describe an alternative method for large area holographic master recording, using standard optics and low power lasers in combination with an x, y-translation stage. In this setup small sub-holograms generated by a phase only spatial light modulator (SLM) are recorded next to each other to generate a large size vHOE. The setup is flexible to generate various types of HOEs without the need of a change in the mechanical and optical construction by convenient SLM programming. One Application example and parameter studies for printed vHOEs based on Bayfol® HX Photopolymer will be given.
Miniaturization of optical components, specifically the reduction in thickness created by using planar optical devices, makes light manipulation by diffraction more and more attractive. Optical gratings based on volume Holographic Optical Elements (vHOEs) have the advantage over surface gratings as they reconstruct only a single diffraction order and hence provide high diffraction efficiencies, selectivity and remain fully transparent in the off-Bragg condition.
Guiding light inside an optically transparent medium by total internal reflection (TIR) is common and useful in thin planar optical devices. vHOEs offer unique ways to create selective in- and out-coupling of TIR light. As such vHOEs typically have to be recorded in an edge-lit configuration as the necessary high diffraction angles could not be generated by two free-space beams outside the medium. To record such an edge-lit vHOE, bulky recording blocks or liquid baths are used in complex and hard to align recording setups.
We present in this paper our findings to use instant-developing photopolymer film (Bayfol® HX) to generate 2nd harmonics in the index profile of phase gratings while using free-space recording setups. Those 2nd harmonic components enable the vHOE to diffract at such large angles that they replay in an edge-lit configuration. We will discuss in this paper selected materials and beneficial recording parameters to tune the diffraction efficiency towards 2nd harmonic replay. By this - in reported specific cases - the cumbersome and complex edge-lit recording can be substituted by easy-to-use free-space setups. This process significantly simplifies master recordings for vHOEs with edge-lit functionalities which later can be used in contact copy schemes for mass replication.
Manipulating light with optical gratings based on volume Holographic Optical Elements (vHOEs), also known as volume Bragg gratings, has the advantage to reconstruct only the first diffraction order and hence provide high diffraction efficiencies and angular selectivity. In addition, they offer the further benefit to be fully transparent in the off- Bragg condition like it is required in optical combiners. We present the latest status of our instant-developing photopolymer film technology (Bayfol® HX) and show beneficial recording parameters - specifically we discuss the challenges to record transmission vHOEs and how to overcome them. Experimental results on color transmission recordings are shown and it is demonstrated that those match perfectly to Kogelniks coupled wave theory. It is recommended to adopt the dynamic range of the recording media by proper choice of recording dosage, recording power, beam ratio and photopolymer film type to the desired transmission vHOE design.
Bayfol® HX film is a new class of recording materials for volume holography. It was commercialized in 2010 and is offering the advantages for full-color recording and moisture resistance without any chemical or thermal processing, combined with low shrinkage and detuning. These photopolymers are based on the two-chemistry concept in which the writing chemistry is dissolved in a preformed polymeric network. This network provides the necessary mechanical stability to the material prior to recording. In addition to the well-known security and imaging applications, Bayfol® HX film also offers a new opportunity for the manufacturing of volume Holographic Optical Elements (vHOEs) in new optical and optoelectronic applications. For the implementation of holographic recording layouts and associated exposure schedules for these HOEs detailed understanding of the photopolymer material properties and the knowledge how to achieve the optical requirements of dedicated holographic applications are necessary. In this paper we extend the application of our simulation method for the writing mechanism for the Bayfol® HX photopolymer film. Different photopolymer product variations, including development of photopolymer grades with improved bleaching properties and increased dynamical range, which enable simultaneous multi-color recording, while maintaining a high diffraction efficiency of the recorded holograms are covered. The model is investigated experimentally by recording and evaluation of specifically designed directional diffuser vHOEs as they would be used e.g. for light shaping or light management purposes. One important observation is the capability of Bayfol® HX film type photopolymers to form highly efficient diffraction gratings even at very high intensity ratios of the reference beam versus the object beam.
We have been developing a new class of recording materials for volume holography, offering the advantages of full
color recording and depth tuning without any chemical or thermal processing, combined with low shrinkage and
detuning. These photopolymers are based on the two-chemistry concept in which the writing chemistry is dissolved in a
preformed polymeric network. This network gives the necessary mechanical stability to the material prior to recording.
In this paper we describe several aspects of holographic recording into Bayfol® HX which are beneficial for its effective
use and discuss them within a more elaborate reaction-diffusion model. Inhibition phenomena and the influence of precure
are studied within this model and are investigated experimentally for single hologram recording and angular
multiplexed hologram recordings. Also the dark reaction after the exposure period and the minimum allowable waiting
time for full hologram formation are addressed. The proper understanding of these phenomena is important for the
optimal usage of these new materials, in for example step-and-repeat mass production of holograms.
We have been developing a new class of recording materials for volume holography, offering the advantages for full
color recording and depth tuning without any chemical or thermal processing, combined with low shrinkage and
detuning. These photopolymers are based on the two chemistry concept in which the writing chemistry is dissolved in a
preformed polymeric network. This network gives the necessary mechanical stability to the material prior to recording.
In this paper we show that the recording process in these materials can be successfully described within a reactiondiffusion
model. For the first time the combination of plane-wave recording data in transmission and reflection geometry
was used to extract the model parameters. This was achieved via a master curve construction of the respective power
density response functions of the photopolymer at saturation recording conditions. Within that model, power density
response, spatial frequency response, non-locality effects, beam ratio effects and even dosage response can be predicted
and explained for a wide range of CW recording conditions which are important for various holographic applications of
these new materials.
This paper describes a new class of recording materials for volume holographic applications suitable to meet commercial
manufacturing needs. These next-generation holographic photopolymers have the ability to satisfy the unmet demand
for color and depth tuning that is only possible with volume holograms. Unlike earlier holographic photopolymers, these
new materials offer the advantages of no chemical or thermal processing combined with low shrinkage and detuning.
Furthermore, these materials exhibit high transparency, a high resolution of more than 5000 lines/mm and are
environmentally robust. Bayer MaterialScience plans to commercialize these materials, which combine excellent
holographic characteristics with compatibility to mass-production processes. In this paper, we will briefly discuss the
potential markets and applications for a new photopolymer, describe the attributes of this new class of photopolymers,
relate their ease of use in holographic recording, and discuss potential applications of such materials..
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.