This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The geometric and radiometric responses of the STC Proto Flight model have been characterized on-ground during the calibration campaign. The derived responses will be used to calibrate the STC images that will be acquired in flight. The aim is to derive the functions that link the detected signal in digital number to the radiance of the target surface in physical units.
The result of the radiometric calibration consists in the determination of well-defined quantities: i) the dark current as a function of the integration time and of the detector temperature, nominally fixed at 268 K; ii) the Read Out Noise, which is associated with the noise signal of the read-out electronic; iii) the Fixed Pattern Noise, which is generated by the different response of each pixel; iv) once these quantities are known, the photon response and the Photo Response Non-uniformity, which represent the variation of the photon-responsivity of a pixel in an array, can be derived.
The final result of the radiometric calibration is the relation between the radiance of an accurately known and uniform source, and the digital numbers measured by the detector.
UHECRs can be studied in two ways: either via direct detection of the secondary particles, i.e. extensive air shower (EAS), produced by UEHRCs interaction with the atmosphere, or by observing during night the track of the UV fluorescence emitted by EAS. The origin direction of the cosmic rays can be therefore determined.
While ground-based observatories are already operative, different optical configurations, based mainly on the Schmidt camera layout or double Fresnel lenses concept, can be envisaged for future space-based ones. Both solutions faced in the past technological issues: transmission and resolution at large field angles for Fresnel lenses and weight of the primary mirror for the Schmidt. However, recent advances in the technology of ultra-lightweight, large and deployable active mirrors made the Schmidt camera approach feasible, becoming the preferred option.
This work describes a lightweight Schmidt space telescope design for UHECRs detection conceived for a mission intended to orbit at 600 km altitude.
The instrument concept is a fast, high-pixelized, large aperture and large Field-of-View (FoV) digital camera, working in the near-UV wavelength range with single photon counting capability. The telescope will record the track of an EAS with a time resolution of 2.5 μs and a spatial resolution of about 0.6 km (corresponding to ~ 4’), thus allowing the determination of energy and direction of the primary particles.
The proposed design has about 50° FoV and a 4.2 m entrance pupil diameter. The mirror is 7.5 m in diameter, it is deployable and segmented to fit the diameter of the considered launcher fairing (i.e. Ariane 6.2). The Schmidt corrector plate is a lightweight annular corona.
This configuration provides a polychromatic angular resolution less than 4' RMS over the whole FoV with a very fast relative aperture, i.e. F/# 0.7. Thanks to its very large pupil and large FoV, the design could be fit for a space-based observatory, thus enhancing the science achievable with respect to the presently operating ground-based counterparts, such as Telescope Array and Auger. A key advantage of this catadioptric design over the classic all refractive adopted in the past is the higher attainable global throughput. This parameter guarantees to reach and fulfil the required instrument photon collection specifications.
The stray light calibration was performed in a clean environment in front of the OPSys solar disk divergence simulator (at ALTEC, in Torino, Italy), which is able to emulate different heliocentric distances. Ground calibrations were a unique opportunity to map the Metis stray light level thanks to a pure solar disk simulator without the solar corona. The stray light calibration was limited to the visible light case, being the most stringent. This work is focused on the description of the laboratory facility that was used to perform the stray light calibration and on the calibration results.
The payload is based on a 1-m class telescope ahead of a suite of instruments: two spectrometric channels covering the band 1.95 to 7.80 μm and four photometric channels working in the range 0.5 to 1.9 μm.
The production of the primary mirror (M1) is one of the main technical challenges of the mission. A trade-off on the material to be used for manufacturing the 1-m diameter M1 was carried out, and aluminium alloys have been selected as the baseline materials both for the telescope mirrors and structure. Aluminium alloys have demonstrated excellent performances both for IR small size mirrors and structural components, but the manufacturing and thermo-mechanical stability of large metallic optics still have to be demonstrated especially at cryogenic temperatures.
The ARIEL telescope will be realized on-ground (1 g and room temperature), but it shall operate in space at about 50 K. For this reason a detailed tolerance analysis was performed to assess the telescope expected performance.
M1 is an off-axis section of a paraboloidal mirror and will be machined from a single blank as a stand-alone part. To prove the feasibility of such a large aluminium mirror, a pathfinder mirror program has been started. The prototype has been realized and tested, so far at room temperature, by Media Lario S.r.l.. Cryogenic testing of the prototype will be performed during Phase B1.
ARIEL is based on a 1 m class telescope feeding two instruments: a moderate resolution spectrometer covering the wavelengths from 1.95 to 7.8 microns; and a three-channel photometer (which also acts as a fine guidance sensor) with bands between 0.5 and 1.2 microns combined with a low resolution spectrometer covering 1.25 to 1.9 microns. During its 3.5 years of operation from an L2 orbit, ARIEL will continuously observe exoplanets transiting their host star.
This paper presents an overall view of the integrated design of the payload proposed for this mission. The design tightly integrates the various payload elements in order to allow the exacting photometric stability targets to be met, while providing simultaneous spectral and photometric data from the visible to the mid-infrared. We identify and discuss the key requirements and technical challenges for the payload and describe the trade-offs that were assessed during phase A, culminating in the baseline design for phase B1. We show how the design will be taken forward to produce a fully integrated and calibrated payload for ARIEL that can be built within the mission and programmatic constraints and will meet the challenging scientific performance required for transit spectroscopy.
The Stereo Camera (STC) is part of the SIMBIO-SYS instrument, the Italian suite for imaging in visible and near infrared which is mounted on the BepiColombo European module, i.e. the Mercury Planetary Orbiter (MPO). STC represents the first push-frame stereo camera on board of an ESA satellite and its main objective is the global three-dimensional reconstruction of the Mercury surface.
The harsh environment around Mercury and the new stereo acquisition concept adopted for STC pushed our team to conceive a new design for the camera and to carry out specific calibration activities to validate its photogrammetric performance. Two divergent optical channels converging the collected light onto a unique optical head, consisting in an off-axis telescope, will provide images of the surface with an on-ground resolution at periherm of 58 m and a vertical precision of 80 m.
The observation strategies and operation procedures have been designed to optimize the data-volume and guarantee the global mapping considering the MPO orbit.
Multiple calibrations have been performed on-ground and they will be repeated during the mission to improve the instrument performance: the dark side of the planet will be exploited for dark calibrations while stellar fields will be acquired to perform geometrical and radiometric calibrations.
Metis features two channels to image the solar corona in two different spectral bands: in the HI Lyman ∝ at 121.6 nm, and in the polarized visible light band (580 – 640 nm). Metis is a solar coronagraph adopting an “inverted occulted” configuration. The inverted external occulter (IEO) is a circular aperture followed by a spherical mirror which back rejects the disk light. The reflected disk light exits the instrument through the IEO aperture itself, while the passing coronal light is collected by the Metis telescope. Common to both channels, the Gregorian on-axis telescope is centrally occulted and both the primary and the secondary mirror have annular shape.
Classic alignment methods adopted for on-axis telescope cannot be used, since the on-axis field is not available. A novel and ad hoc alignment set-up has been developed for the telescope alignment.
An auxiliary visible optical ground support equipment source has been conceived for the telescope alignment. It is made up by four collimated beams inclined and dimensioned to illuminate different sections of the annular primary mirror without being vignetted by other optical or mechanical elements of the instrument.
The entire alignment and verification phase has been performed by the Metis team in collaboration with Thales Alenia Space Torino and took place in ALTEC (Turin) at the Optical Payload System Facility using the Space Optics Calibration Chamber infrastructure, a vacuum chamber especially built and tested for the alignment and calibration of the Metis coronagraph, and suitable for tests of future payloads.
The goal of the alignment, integration, verification and calibration processes is to measure the parameters of the telescope, and the characteristics of the two Metis channels: visible and ultraviolet. They work in parallel thanks to the peculiar optical layout. The focusing and alignment performance of the two channels must be well understood, and the results need to be easily compared to the requirements. For this, a dedicated illumination method, with both channels fed by the same source, has been developed; and a procedure to perform a simultaneous through focus analysis has been adopted.
In this paper the final optical performance achieved by Metis is reported and commented.
ARIEL is based on a 1-m class telescope feeding a collimated beam into two separate instrument modules: a spectrometer module covering the waveband between 1.95 μm and 7.80 μm; and a combined fine guidance system/visible photometer/NIR spectrometer. The primary payload is the spectrometer, whose scientific observations are supported by the fine guidance system and photometer, which is monitoring the photometric stability of the target and allowing, at the same time, the target to be properly pointed.
The telescope configuration is a classic Cassegrain layout used with an eccentric pupil and coupled to a tertiary off-axis paraboloidal mirror; the design has been conceived to satisfy all the mission requirements, and it guarantees the requested “as-built” diffraction limited performance.
To constrain the thermo-mechanically induced optical aberrations, the primary mirror (M1) temperature will be monitored and finely tuned using an active thermal control system based on thermistors and heaters. They will be switched on and off to maintain the M1 temperature within ±1 K by the Telescope Control Unit (TCU).
The TCU is a payload electronics subsystem also responsible for the thermal control of the main spectrometer detectors as well as the secondary mirror (M2) mechanism and IR calibration source management. The TCU, being a slave subsystem of the Instrument Control Unit (ICU), will collect the housekeeping data from the monitored subsystems and will forward them to the master unit. The latter will run the application software, devoted to the main spectrometer management and to the scientific data on-board processing.
ARIEL has been selected by the European Space Agency (ESA) as the next medium-class science mission (M4) to be launched in 2028. The aim of the ARIEL mission is to study the atmospheres of a selected sample of exoplanets.
The payload is based on a 1-m class telescope ahead of a suite of instruments: two spectrometric channels covering the band 1.95 to 7.80 μm without gaps, three photometric channels working in the range 0.5 to 1.2 μm, and a low-resolution spectrometer in the range 1.25 to 1.95 μm.
The telescope layout is conceived as an eccentric pupil two-mirror classic Cassegrain configuration coupled to a tertiary off-axis paraboloidal mirror. The telescope will be realized on-ground, i.e. subjected to gravity and at room temperature, but it shall operate in space, at 0 g, and at a temperature of about 50 K. For this reason, the telescope expected “as-built” in-flight performance has to be determined via a detailed thermo-elastic analysis.
A trade-off on the material to be used for manufacturing the 1-m diameter primary mirror (M1) was carried out, and aluminum alloys have been selected as the baseline materials for both the telescope mirrors and structure.
The use of metals, like aluminum alloys, is nowadays frequently considered for the fabrication of space telescopes observing in the infrared wavelength range. Small-size aluminum parts have been proved to be popular both for IR mirrors and structural components, but the manufacturing and stability of large metallic optics still have to be demonstrated. The production of a large aluminum mirror such as that of ARIEL is a challenge, and to prove its feasibility a dedicated study and development program has been started. A prototype, with the same size of the M1 flight model but a simpler surface profile, has been realized and tested.
During its four-years mission, ARIEL will observe several hundreds of exoplanets ranging from Jupiter- and Neptune-size down to super-Earth and Earth-size with its 1 meter-class telescope.3 The analysis of spectra and photometric data will allow to extract the chemical fingerprints of gases and condensates in the planets atmospheres, including the elemental composition for the most favorable targets. It will also enable the study of thermal and scattering properties of the atmosphere as the planet orbits around its parent star.
The high sensitivity requirements of the mission need an extremely stable thermo-mechanical platform. In this paper we describe the thermal architecture of the payload and discuss the main requirements that drive the design. The ARIEL thermal configuration is based on a passive and active cooling approach. Passive cooling is achieved by a V-Groove based design that exploits the L2 orbit favorable thermal conditions. The telescope and the optical bench are passively cooled to a temperature close to 50K to achieve the required sensitivity and stability. The photometric detectors are maintained at the operating temperature of 50K by a dedicated radiator coupled to cold space. The IR spectroscopic channel detectors require a lower temperature reference. This colder stage is provided by an active cooling system based on a Neon Joule-Thomson cold end, fed by a mechanical compressor, able to reach temperatures lower than 30K.
Thermal stability of the telescope and detector units is one of the main drivers of the design. The periodical perturbations due to orbital changes, to the active cooling or to other internal instabilities make the temperature control one of the most critical issues of the whole architecture. The thermal control system design, based on a combination of passive and active solutions aimed at maintaining the required stability at the telescope and detector stages level, is described.
We report here about the baseline thermal architecture at the end of the Phase A, together with the main trade-offs needed to enable the ARIEL exciting science in a technically feasible payload design. Thermal modeling results and preliminary performance predictions in terms of steady state and transient behavior are also discussed.
The instrument concept is based on a grazing incidence telescope, (1200 m focal length, 18 arcmin x 18 arcmin FoV), in Wolter configuration couple to a normalincidence VLS grating spectrometer, which preserve the stigmaticity in an extended spectral region and in the whole field-of-view.
The spectral range covered by the instrument is the 116-126 nm region at the first order and the 57-63 nm region at the second order. The spectral resolving element is 65 mÅ (I order), corresponding to a velocity resolution of 16 km/s.
The WAC optical design is an innovative one: it adopts an all reflecting, unvignetted and unobstructed two mirror configuration which allows to cover a 12° × 12° field of view with an F/5.6 aperture and gives a nominal contrast ratio of about 10–4.
The flight model of this camera has been successfully integrated and tested in our laboratories, and finally has been integrated on the satellite which is now waiting to be launched in February 2004.
In this paper we are going to describe the optical characteristics of the camera, and to summarize the results so far obtained with the preliminary calibration data. The analysis of the optical performance of this model shows a good agreement between theoretical performance and experimental results.
The main scientific objective is the 3D global mapping of the entire surface of Mercury with a scale factor of 50 m per pixel at periherm in four different spectral bands.
The system consists of two twin cameras looking at ±20° from nadir and sharing some components, such as the relay element in front of the detector and the detector itself. The field of view of each channel is 4° x 4° with a scale factor of 23’’/pixel. The system guarantees good optical performance with Ensquared Energy of the order of 80% in one pixel.
For the straylight suppression, an intermediate field stop is foreseen, which gives the possibility to design an efficient baffling system.
The main scientific objective is the 3D global mapping of the entire surface of Mercury with a scale factor of 50 m per pixel at periherm in five different spectral bands.
The system consists of two sub-channels looking at ±20° from nadir. They share the detector and all the optical components with the exception of the first element, a rhomboid prism. The field of view of each channel is 5.3° × 4.5° and the scale factor is 23 arcsec/pixel. The system guarantees an aberration balancing over all the field of view and wavelength range with optimal optical performance.
For stray-light suppression, an efficient baffling system able to well decouple the optical paths of the two subchannels has been designed.
METIS is an externally occulted coronagraph which adopts an “inverted occulted” configuration. The Inverted external occulter (IEO) is a small circular aperture at the METIS entrance; the Sun-disk light is rejected by a spherical mirror M0 through the same aperture, while the coronal light is collected by two annular mirrors M1-M2 realizing a Gregorian telescope. To allocate the spectroscopic part, one portion of the M2 is covered by a grating (i.e. approximately 1/8 of the solar corona will not be imaged).
This paper presents the error budget analysis for this new concept coronagraph configuration, which incorporates 3 different sub-channels: UV and EUV imaging sub-channel, in which the UV and EUV light paths have in common the detector and all of the optical elements but a filter, the polarimetric visible light sub-channel which, after the telescope optics, has a dedicated relay optics and a polarizing unit, and the spectroscopic sub-channel, which shares the filters and the detector with the UV-EUV imaging one, but includes a grating instead of the secondary mirror.
The tolerance analysis of such an instrument is quite complex: in fact not only the optical performance for the 3 sub-channels has to be maintained simultaneously, but also the positions of M0 and of the occulters (IEO, internal occulter and Lyot stop), which guarantee the optimal disk light suppression, have to be taken into account as tolerancing parameters.
In the aim of assuring the scientific requirements are optimally fulfilled for all the sub-channels, the preliminary results of manufacturing, alignment and stability tolerance analysis for the whole instrument will be described and discussed.
In particular optical instruments are very sensitive to ambient conditions, especially temperature. This variable can cause dilatations and misalignments of the optical elements, and can also lead to rise of dangerous stresses in the optics. Their displacements and the deformations degrade the quality of the sampled images.
In this work a method for studying the effects of the temperature variations on the performance of imaging instrument is presented. The optics and their mountings are modeled and processed by a thermo-mechanical Finite Element Model (FEM) analysis, then the output data, which describe the deformations of the optical element surfaces, are elaborated using an ad hoc MATLAB routine: a non-linear least square optimization algorithm is adopted to determine the surface equations (plane, spherical, nth polynomial) which best fit the data. The obtained mathematical surface representations are then directly imported into ZEMAX for sequential raytracing analysis. The results are the variations of the Spot Diagrams, of the MTF curves and of the Diffraction Ensquared Energy due to simulated thermal loads.
This method has been successfully applied to the Stereo Camera for the BepiColombo mission reproducing expected operative conditions.
The results help to design and compare different optical housing systems for a feasible solution and show that it is preferable to use kinematic constraints on prisms and lenses to minimize the variation of the optical performance of the Stereo Camera.
One of the BepiColombo instruments is the STereoscopic imaging Channel (STC), which is a channel of the Spectrometers and Imagers for MPO BepiColombo Integrated Observatory SYStem (SIMBIOSYS) suite: an integrated system for imaging and spectroscopic investigation of the Mercury surface. STC main aim is the 3D global mapping of the entire surface of the planet Mercury during the BepiColombo one year nominal mission.
The STC instrument consists in a novel concept of stereocamera: two identical cameras (sub-channels) looking at ±20° from nadir which share most of the optical components and the detector. Being the detector a 2D matrix, STC is able to adopt the push-frame acquisition technique instead of the much common push-broom one.
The camera has the capability of imaging in five different spectral bands: one panchromatic and four intermediate bands, in the range between 410 and 930 nm.
To avoid mechanisms, the technical solution chosen for the filters is the single substrate stripe-butted filter in which different glass pieces, with different transmission properties, are glued together and positioned just in front of the detector.
The useful field of view (FoV) of each sub-channel, though divided in 3 strips, is about 5.3° x 3.2°. The optical design, a modified Schmidt layout, is able to guarantee that over all the FoV the diffraction Ensquared Energy inside one pixel of the detector is of the order of 70-80%.
To effectively test and calibrate the overall STC channel, an ad hoc Optical Ground Support Equipment has been developed. Each of the sub-channels has to be separately calibrated, but also the data of one sub-channel have to be easily correlated with the other one.
In this paper, the experimental results obtained by the analysis of the data acquired during the preliminary onground optical calibration campaign on the STC Flight Model will be presented.
This analysis shows a good agreement between the theoretical expected performance and the experimental results.
STC will provide a three-dimensional reconstruction of Mercury surface. The generation of a DTM of the observed features is based on the processing of the acquired images and on the knowledge of the intrinsic and extrinsic parameters of the optical system.
The new stereo concept developed for STC needs a pre-flight verification of the actual capabilities to obtain elevation information from stereo couples: for this, a stereo validation setup to get an indoor reproduction of the flight observing condition of the instrument would give a much greater confidence to the developed instrument design.
STC is the first stereo satellite camera with two optical channels converging in a unique sensor. Its optical model is based on a brand new concept to minimize mass and volume and to allow push-frame imaging. This model imposed to define a new calibration pipeline to test the reconstruction method in a controlled ambient. An ad-hoc indoor set-up has been realized for validating the instrument designed to operate in deep space, i.e. in-flight STC will have to deal with source/target essentially placed at infinity.
This auxiliary indoor setup permits on one side to rescale the stereo reconstruction problem from the operative distance in-flight of 400 km to almost 1 meter in lab; on the other side it allows to replicate different viewing angles for the considered targets.
Neglecting for sake of simplicity the Mercury curvature, the STC observing geometry of the same portion of the planet surface at periherm corresponds to a rotation of the spacecraft (SC) around the observed target by twice the 20° separation of each channel with respect to nadir. The indoor simulation of the SC trajectory can therefore be provided by two rotation stages to generate a dual system of the real one with same stereo parameters but different scale.
The set of acquired images will be used to get a 3D reconstruction of the target: depth information retrieved from stereo reconstruction and the known features of the target will allow to get an evaluation of the stereo system performance both in terms of horizontal resolution and vertical accuracy.
To verify the 3D reconstruction capabilities of STC by means of this stereo validation set-up, the lab target surface should provide a reference, i.e. should be known with an accuracy better than that required on the 3D reconstruction itself. For this reason, the rock samples accurately selected to be used as lab targets have been measured with a suitable accurate 3D laser scanner.
The paper will show this method in detail analyzing all the choices adopted to lead back a so complex system to the indoor solution for calibration.
Since the coronal light is enormously fainter than the photospheric one, a very tough suppression is needed for the internal stray light, in particular the requirement for the stray light suppression is more stringent in the VL than in the UV, because the emission of the corona with respect to the disk emission is different in the two cases, and the requirements are a suppression of at least 10-9 times for the VL and a suppression of at least 10-7 times for the UV channel.
This paper presents the stray light analysis for this new coronographic configuration.
The complexity of the optomechanical design of METIS, combined with the faintness of the coronal light with respect to the solar disk noise, make a standard ray tracing approach not feasible because it is not sufficient to stop at the first generation of scattered rays in order to check the requirements. Also scattered rays down to the fourth generation must be treated as sources of new scattering light, to analyze the required level of accuracy. If used in a standard ray tracing scattering analysis, this approach is absolutely beyond the computational capabilities today available; therefore we opted for a scattering ray generation with a Montecarlo method in which after a father ray hits a surface, only one ray is generated, randomly selected according to the distribution of the transmitted energy. These rays bring with them all the energy that is otherwise distributed between all the rays of second generation, making the model more realistic and avoiding loss of energy due to the rays sampling. The stray light has been studied in function of the mechanical roughness of the surfaces and the obtained results indicate an instrument stray light blocking performance well within the requirements in both channels.
ARIEL is based on a 1-m class telescope ahead of two spectrometer channels covering the band 1.95 to 7.8 microns. In addition there are four photometric channels: two wide band, also used as fine guidance sensors, and two narrow band. During its 3.5 years of operations from L2 orbit, ARIEL will continuously observe exoplanets transiting their host star.
The ARIEL optical design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is composed of an off-axis portion of a two-mirror classic Cassegrain coupled to a tertiary off-axis paraboloidal mirror. The telescope and optical bench operating temperatures, as well as those of some subsystems, will be monitored and fine tuned/stabilised mainly by means of a thermal control subsystem (TCU-Telescope Control Unit) working in closed-loop feedback and hosted by the main Payload electronics unit, the Instrument Control Unit (ICU). Another important function of the TCU will be to monitor the telescope and optical bench thermistors when the Payload decontamination heaters will be switched on (when operating the instrument in Decontamination Mode) during the Commissioning Phase and cyclically, if required. Then the thermistors data will be sent by the ICU to the On Board Computer by means of a proper formatted telemetry. The latter (OBC) will be in charge of switching on and off the decontamination heaters on the basis of the thermistors readout values.
During the preflight calibration campaign of STC, some detector spurious effects have been noticed. Analyzing the images taken during the calibration phase, two different signals affecting the background level have been measured. These signals can reduce the detector dynamics down to a factor of 1/4th and they are not due to dark current, stray light or similar effects.
In this work we will describe all the features of these unwilled effects, and the calibration procedures we developed to analyze them.
The CaSSIS high resolution optical system is based on a TMA telescope (Three Mirrors Anastigmatic configuration) with a 4th powered folding mirror compacting the CFRP (Carbon Fiber Reinforced Polymer) structure. The camera EPD (Entrance Pupil Diameter) is 135 mm and the focal length is 880 mm, giving an F# 6.5 system; the wavelength range covered by the instrument is 400-1100 nm. The optical system is designed to have distortion of less than 2%, and a worst case Modulation Transfer Function (MTF) of 0.3 at the detector Nyquist spatial frequency (i.e. 50 lp/mm).
The Focal Plane Assembly (FPA), including the detector, is a spare from the Simbio-Sys instrument of the Italian Space Agency (ASI). Simbio-Sys will fly on ESA’s BepiColombo mission to Mercury in 2018. The detector, developed by Raytheon Vision Systems, is a 2k×2k hybrid Si-PIN array with 10 μm-pixel pitch. The detector allows snap shot operation at a read-out rate of 5 Mpx/s with 14-bit resolution. CaSSIS will operate in a push-frame mode with a Filter Strip Assembly (FSA), placed directly above the detector sensitive area, selecting 4 colour bands. The scale at a slant angle of 4.6 m/px from the nominal orbit is foreseen to produce frames of 9.4 km × 6.3 km on the Martian surface, and covering a Field of View (FoV) of 1.33° cross track × 0.88° along track.
The University of Bern was in charge of the full instrument integration as well as the characterisation of the focal plane of CaSSIS. The paper will present an overview of CaSSIS and the optical performance of the telescope and the FPA. The preliminary results of the on-ground calibration campaign and the first light obtained during the commissioning and pointing campaign (April 2016) will be described in detail. The instrument is acquiring images with an average Point Spread Function at Full-Width-Half-Maximum (PSF FWHM) of < 1.5 px, as expected.
To determine the design requirements and to model the on-ground and in-flight performance of STC, a radiometric model has been developed. In particular, STC optical characteristics have been used to define the instrument response function. As input for the model, different sources can be taken into account depending on the applications, i.e. to simulate the in-flight or on-ground performances. Mercury expected radiance, the measured Optical Ground Support Equipment (OGSE) integrating sphere radiance, or calibrated stellar fluxes can be considered.
Primary outputs of the model are the expected signal per pixel expressed in function of the integration time and its signal-to-noise ratio (SNR). These outputs allow then to calculate the most appropriate integration times to be used during the different phases of the mission; in particular for the images taken during the calibration campaign on-ground and for the in-flight ones, i.e. surface imaging along the orbit around Mercury and stellar calibration acquisitions.
This paper describes the radiometric model structure philosophy, the input and output parameters and presents the radiometric model derived for STC. The predictions of the model will be compared with some measurements obtained during the Flight Model (FM) ground calibration campaign. The results show that the model is valid, in fact the foreseen simulated values are in good agreement with the real measured ones.
The FPA including is one of the spare components of the Simbio-Sys instrument of the Italian Space Agency (ASI) that will fly on ESA’s Bepi Colombo mission to Mercury. The detector, developed by Raytheon Vision Systems, is a 2kx2k hybrid Si-PIN array with a 10 μm pixel. The detector is housed within a block and has filters deposited directly on the entrance window. The window is a 1 mm thick monolithic plate of fused silica. The Filter Strip Assembly (FSA) is produced by Optics Balzers Jena GmbH and integrated on the focal plane by Leonardo-Finmeccanica SpA (under TAS-I responsibility). It is based on dielectric multilayer interference coatings, 4 colour bands selected with average in-band transmission greater than 95 percent within wavelength range (400-1100 nm), giving multispectral images on the same detector and thus allows CaSSIS to operate in push-frame mode.
The Field of View (FOV) of each colour band on the detector is surrounded by a mask of low reflective chromium (LRC), which also provides with the straylight suppression required (an out-of-band transmission of less than 10-5/nm). The mask has been shown to deal effectively with cross-talk from multiple reflections between the detector surface and the filter.
This paper shows the manufacturing and optical properties of the FSA filters and the FPA preliminary on-ground calibration results.
View contact details
No SPIE Account? Create one
