The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 μm with the goal of extending it to 0.35-2.4 μm with the addition of an U arm to the BV spectrograph and a separate K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Modularity and fibre-feeding allows ANDES to be placed partly on the ELT Nasmyth platform and partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of almost 300 scientists and engineers which include the majority of the scientific and technical expertise in the field that can be found in ESO member states.
We describe the instrument’s design and architecture, emphasizing its unique features. The design is driven by requirements on resolving power, slit area, spectral coverage and stability. The instrument can operate in seeinglimited or SCAO modes, with options for sky and/or calibration measurements. In SCAO mode, it can use a small Integral Field Unit (IFU) with different spaxel scales. The light from the telescope reaches the Front-End on the Nasmyth platform, which has four insertable modules: two seeing-limited arms, one SCAO arm and one IFU arm. They are connected by fibres or fibre bundles to the Spectrographs in different locations: the Nasmyth Platform and the Coud´e room. The wavelength splitting depends on the fibre transparency. The subsystems are placed at different distances from the telescope. In Phase-B-one, we performed analyses to define the best trade-off for the budgets and architecture. We extended the spectrographs toward the goal ranges as much as possible. ANDES is complex, but its sophisticated and modular design will enable next-generation astronomy research.
The MOONS (Multiple-Object Optical and Near-infrared Spectrograph) is a fibre-fed spectrograph for the European Southern Observatory’s Very Large Telescope. It will provide simultaneous observations of up to 1,000 objects covering the wavelength range 650 nm to 1800 nm. MOONS will also provide an observing mode with 500 object-sky pairs to provide precise sky-subtraction by nodding between object and sky. For this observing mode to be successful the instrument must be well calibrated and the relative throughput of each optical fibre known. The MOONS instrument throughput and wavelength calibration will be characterised, on a daily basis, using the on-board calibration system. The calibration system will illuminate the instrument via a deployable diffuse reflective screen located in front of the focal surface containing the optical fibres. The calibration system provides both spectral calibration via arc lamp illumination, and flat-field illumination via a Digital Micro-mirror Device (DMD) based projector system. This paper will provide a summary of the design and performance of the MOONS calibration system. Flat-field performance results will be presented which demonstrate the calibration unit achieves better than 2% peak to valley illumination uniformity across the 880 mm diameter flat-field screen.
The Multi Object Optical and Near-infrared Spectrograph (MOONS) instrument is the next generation multi-object spectrograph for the Very Large Telescope (VLT). The instrument combines the high multiplexing capability offered by 1000 optical fibres deployed by individual robotic positioners with a novel spectrograph able to provide both low- and high-resolution spectroscopy simultaneously across the wavelength range 0.64μm - 1.8μm. Powered by the collecting area of the 8-m VLT, MOONS will provide the astronomical community with a world-leading facility able to serve a wide range of Galactic, Extragalactic and Cosmological studies. This paper provides an updated overview of the instrument and its construction progress, reporting on the ongoing integration phase.
The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs (UBV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 µm with the goal of extending it to 0.35-2.4 µm with the addition of a K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Its modularity will ensure that ANDES can be placed entirely on the ELT Nasmyth platform, if enough mass and volume is available, or partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of more than 200 scientists and engineers which represent the majority of the scientific and technical expertise in the field among ESO member states.
ERIS (Enhanced Resolution Imager and Spectrograph) is a new adaptive optics instrument installed at the Cassegrain focus of the VLT-UT4 telescope at the Paranal Observatory in Chile. ERIS consists of two near infrared instruments: SPIFFIER, an integral field unit (IFU) spectrograph covering J to K bands, and NIX, an imager covering J to M bands. ERIS has an adaptive optics system able to work with both LGS and NGS. The Assembly Integration Verification (AIV) phase of ERIS at the Paranal Observatory was carried out starting in December 2021, followed by several commissioning runs in 2022. This contribution will describe the first preliminary results of the on-sky performance of ERIS during its commissioning and the future perspectives based on the preliminary scientific results.
A key technical driver for the MOONS (Multi-object Optical and Near Infrared Spectrograph) instrument is to provide accurate sky subtraction using pairs of adjacent fibres. To achieve this the fibre positioners must achieve extremely close proximity, and the throughput of each fibre must be well characterised. The latter of these conditions requires a calibration system capable of creating a flat field input to the fibres to an illumination uniformity of less than 2% variation. Given the very limited space available in the instrument, a number of systems were considered to achieve this. After consideration of the available options, a novel system using a digital micromirror device (DMD) was selected for implementation. These devices has a long history in commercial displays, and provide a compact, highly responsive, and robust solution to many structured light applications. This paper explains the design and manufacture of the calibration module, as well as the intended test plan for the system.
ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.
HiPERCAM is a five channel fast photometer to study high temporal variability of the universe, covering from 0.3 to 1.0 microns in five wavebands. HiPERCAM uses custom-made 2Kx1K split-frame transfer CCDs mounted in separate compact camera heads and cooled by thermoelectric coolers to 180K. The demands on the readout system are very unique to this instrument in that all five CCDs are operated in a pseudo drift window mode along with the normal windowing, binning and full-frame modes. The pseudo drift mode involves reading out small window regions from 2 quadrants of each CCD, with the possibility to exceed 1 kHz window rates per output channel. The CCDs are custom manufactured by Teledyne e2v to allow independent serial clock controls for each output. The devices are manufactured in standard and deep-depletion processes with appropriate anti-reflection coatings to achieve high quantum efficiencies in each of the five wavebands. An ESO NGC controller has been configured to control and readout all five CCDs. The data acquisition software has been modified to provide GPS timestamping of the data and access to the acquired data in real time for the data reduction software. The instrument has had its first light and first science observations on the 4.2m William Herschel Telescope, La Palma during a commissioning run in October 2017 and subsequently on the 10.4m Gran Telescopio Canarias in February 2018 and science observations in April 2018. This paper will present the details of the preamplifier electronics, configuration of the readout electronics and the data acquisition software to support the unique readout modes along with the overall performance of the instrument.
The Enhanced Resolution Imager and Spectrograph (ERIS) is a next-generation, adaptive optics assisted, near-IR imager and integral field spectrograph (IFS) for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4. It will make use of the Adaptive Optics Facility (AOF), comprising the Deformable Secondary Mirror (DSM) and the UT4 Laser Guide Star Facility (4LGSF). It is a rather complex instrument, with its state of the art AO system and two science channels. It is also meant to be a "workhorse" instrument and offers many observation modes. ERIS is being built by a Consortium of European Institutes comprising MPE Garching (D), ATC (UK), ETH Zürich (CH), Leiden University (NL) and INAF (I) in collaboration with ESO. The instrument passed Final Design Review in mid-2017 and is now in the MAIT phase. In this paper we describe the design of the ERIS Instrument Software (INS), which is in charge of controlling all instrument functions and implementing observation, calibration and maintenance procedures. The complexity of the instrument is reflected in the architecture of its control software and the number of templates required for operations. After a brief overview of the Instrument, we describe the general architecture of the ERIS control network and software. We then discuss some of the most interesting aspects of ERIS INS, like the wavefront sensors function control, AO secondary loops, IFS quick-look processing and the on-line processing for high-contrast imaging observations. Finally, we provide some information about our development process, including software quality assurance activities.
HiPERCAM is a quintuple-beam imager that saw first light on the 4.2 m William Herschel Telescope (WHT) in October 2017 and on the 10.4 m Gran Telescopio Canarias (GTC) in February 2018. The instrument uses re- imaging optics and 4 dichroic beamsplitters to record ugriz (300–1000 nm) images simultaneously on its five CCD cameras. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to 90°C, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. In this paper, we report on the as-built design of HiPERCAM, its first-light performance on the GTC, and some of the planned future enhancements.
ERIS will be the next-generation AO facility on the VLT, combining the heritage of NACO imaging, with the spectroscopic capabilities of an upgraded SINFONI. Here we report on the all-new NIX imager that will deliver diffraction-limited imaging from the J to M band. The instrument will be equipped with both Apodizing Phase Plates and Sparse Aperture Masks to provide high-angular resolution imagery, especially suited for exoplanet imaging and characterization. This paper provides detail on the instrument’s design and how it is suited to address a broad range of science cases, from detailed studies of the galactic centre at the highest resolutions, to studying detailed resolved stellar populations.
HARPS-N (High-Accuracy Radial-Velocity planetary Search) is an instrument designed for the measurement of Radial
Velocities (RV) at highest accuracy. It is located in the Northern hemisphere and installed at the TNG on La Palma
Island. It has allowed scientists to confirm and characterize Earth-like mass planets: Kepler-78b. In this paper, we
present the design of Instrument Control Software (ICS) based on LabVIEW, the key features of implementation such as
the XML-RPC, labVIEW Classes and Shared Variables. We also present here the auto-guiding and fibre hole finding
algorithm. Use of XML-RPC in Labview for ICS with COTS hardware has made the development of HARAPS-N ICS
easily in implementing and integrating with other software in a limited construction time scale.
HARPS North is the twin of the HARPS (High Accuracy Radial velocity for Planetary Search) spectrograph operating in
La Silla (Chile) recently installed on the TNG in La Palma observatory and used to follow-up, the "hot" candidates
delivered by the Kepler satellite. HARPS-N is delivered with its own software that completely integrates with the TNG
control system. A special care has been dedicated to develop tools that will assist the astronomers during the whole
process of taking images: from the observation schedule to the raw image acquisition. All these tools are presented in the
paper. In order to provide a stable and reliable system, the software has been developed keeping in mind concepts like
failover and high-availability. HARPS-N is made of heterogeneous systems, from normal computer to real-time systems,
that's why the standard message queue middleware (ActiveMQ) was chosen to provide the communications between
different processes. The path of operations starting with the Observation Blocks and ending with the FITS frames is fully
automated and could allow, in the future, the completely remote observing runs optimized for the time and quality
constraints.
The Telescopio Nazionale Galileo (TNG)[9] hosts, starting in April 2012, the visible spectrograph HARPS-N. It is based
on the design of its predecessor working at ESO's 3.6m telescope, achieving unprecedented results on radial velocity
measurements of extrasolar planetary systems. The spectrograph's ultra-stable environment, in a temperature-controlled
vacuum chamber, will allow measurements under 1 m/s which will enable the characterization of rocky, Earth-like
planets. Enhancements from the original HARPS include better scrambling using octagonal section fibers with a shorter
length, as well as a native tip-tilt system to increase image sharpness, and an integrated pipeline providing a complete set
of parameters.
Observations in the Kepler field will be the main goal of HARPS-N, and a substantial fraction of TNG observing time
will be devoted to this follow-up. The operation process of the observatory has been updated, from scheduling
constraints to telescope control system. Here we describe the entire instrument, along with the results from the first
technical commissioning.
SCUBA-2 is a revolutionary 10,000 pixel wide-field submillimetre camera, recently commissioned and now operational
at the James Clerk Maxwell Telescope (JCMT). Twin focal planes each consist of four 32 by 40 sub-arrays of
superconducting Transition Edge Sensor (TES) bolometers, the largest combined low temperature bolometer arrays in
operation, to provide simultaneous imaging at wavelengths of 450 and 850 microns. SCUBA-2 was designed to map
large areas of sky more than 100 times faster than the original ground breaking SCUBA instrument and has achieved this
goal. In this paper we describe the performance of the instrument and present results of characterising the eight science
grade TES bolometer arrays. We discuss the steps taken to optimise the setup of the TES arrays to maximise mapping
speed and show how critical changes to the sub-array module thermal design, the introduction of independent focal plane
and 1K temperature control and enhancements to the cryogenics have combined to significantly improve the overall
performance of the instrument.
KEYWORDS: Computing systems, Control systems, Data acquisition, Observatories, Telescopes, Data archive systems, Astronomy, Data communications, Software development, Data processing
The high data rates and unique operation modes of the SCUBA-2 instrument made for an especially challenging effort
to get it working with the existing JCMT Observatory Control System (OCS). Due to some forethought by the original
designers of the OCS, who had envisioned a SCUBA-2 like instrument years before it was reality, the JCMT was
already being coordinated by a versatile Real Time Sequencer (RTS). The timing pulses from the RTS are fanned out to
all of the SCUBA-2 Multi Channel Electronics (MCE) boxes allowing for precision timing of each data sample. The
SCUBA-2 data handing and OCS communications are broken into two tasks, one doing the actual data acquisition and
file writing, the other communicates with the OCS through Drama. These two tasks talk to each other via shared
memory and semaphores. It is possible to swap back and forth between heterodyne and SCUBA-2 observing simply by
selecting an observation for a particular instrument. This paper also covers the changes made to the existing OCS in
order to integrate it with the new SCUBA-2 specific software.
The most challenging of the metrology needs of multi-objects instruments is the registration of the pupil on the
deformable mirror which corrects the wavefront errors. Pick-off mirrors in multi-objects instruments and specially
spectrographs (MOS) require accurate positioning and simultaneous viewing of the pupil on the deformable mirror
(DM) and the focal plane image on the image slicer at the sub-micron level. A laboratory test prototype simulating the
telescope (E-ELT), the beam steering mirror (BSM) and the pupil imaging mirror (PIM), is presented to confirm the
correct positioning of the pupil on the DM and to provide the movements of the moveable optical elements to achieve it.
The opto-mechanical design and testing of this prototype is shown. The BSM stages (Goniometric cradle, Rotation, &
Linear) provide the key mechanical system elements, with precision alignment, resolution, and repeatability .
The design and behaviour of the control system is discussed; the ultimate aim of which is to adjust the BSM and PIM to
correct for any slight mis-positioning of the pick-off mirror and any temporal drift of all the components to achieve the
required alignment. The control system can also cope with flexure effects when required.
SCUBA-2 is a state of the art 10,000 pixel submillimeter camera installed and being commissioned at the James Clerk
Maxwell Telescope (JCMT) providing wide-field simultaneous imaging at wavelengths of 450 and 850 microns. At each
wavelength there are four 32 by 40 sub-arrays of superconducting Transition Edge Sensor (TES) bolometers, each
packaged with inline SQUID multiplexed readout and amplifier. In this paper we present the results of characterising
individual 1280 bolometer science grade sub-arrays, both in a dedicated 50mk dilution refrigerator test facility and in the
instrument installed at the JCMT.
The Atacama Cosmology Telescope (ACT) is designed to measure temperature anisotropies of the cosmic microwave background (CMB) at arcminute resolution. It is the first CMB experiment to employ a 32×32 close-packed array of free-space-coupled transition-edge superconducting bolometers. We describe the organization of the telescope systems and software for autonomous, scheduled operations. When paired with real-time data streaming and display, we are able to operate the telescope at the remote site in the Chilean Altiplano via the Internet from North America. The telescope had a data rate of 70 GB/day in the 2007 season, and the 2008 upgrade to three arrays will bring this to 210 GB/day.
The detector arrays for the SCUBA-2 instrument consist of TES bolometers with superconducting amplifier and
multiplexing circuits based on Superconducting Quantum Interference Devices (SQUIDs). The SCUBA-2 TES arrays
and their multiplexed SQUID readouts need to be set-up carefully to achieve correct performance. Algorithms have been
developed and implemented based on the first available commissioning grade detector, enabling the array to be set up
and optimized automatically.
The Millimeter Bolometer Array Camera (MBAC) was commissioned in the fall of 2007 on the new 6-meter
Atacama Cosmology Telescope (ACT). The MBAC on the ACT will map the temperature anisotropies of the
Cosmic Microwave Background (CMB) with arc-minute resolution. For this first observing season, the MBAC
contained a diffraction-limited, 32 by 32 element, focal plane array of Transition Edge Sensor (TES) bolometers
for observations at 145 GHz. This array was coupled to the telescope with a series of cold, refractive, reimaging
optics. To meet the performance specifications, the MBAC employs four stages of cooling using closed-cycle
3He/4He sorption fridge systems in combination with pulse tube coolers. In this paper we present the design of
the instrument and discuss its performance during the first observing season. Finally, we report on the status
of the MBAC for the 2008 observing season, when the instrument will be upgraded to a total of three separate
1024-element arrays at 145 GHz, 220 GHz and 280 GHz.
We present the results of characterization measurements on a 1280 pixel superconducting bolometer array designed for operation at wavelengths around 450 μm. The array is a prototype for the sub-arrays which will form the focal plane for the SCUBA-2 sub-mm camera, being built for the James Clerk Maxwell Telescope (JCMT) in Hawaii. With over 10 000 pixels in total, it will provide a huge improvement in both sensitivity and mapping speed over existing instruments. The array consists of molybdenum-copper bi-layer TES (transition edge sensor) pixels, bonded to a multiplexer. The detectors operate at a
temperature of approximately 175 mK, and require a heat sink at a temperature of approximately 60 mK. In contrast to previous TES arrays, the multiplexing elements are located beneath each pixel (an "in-focal plane" configuration). We present the results of electrical and optical measurements, and show that the optical NEP (noise equivalent power) is less than 1.4 × 10-16 W Hz-0.5 and thus within the goal of 1.5 × 10-16 W Hz-0.5.
SCUBA-2 is a second generation, wide-field submillimeter camera under development for the James Clerk Maxwell Telescope. With over 12,000 pixels, in two arrays, SCUBA-2 will map the submillimeter sky ~1000 times faster than the current SCUBA instrument to the same signal-to-noise. Many areas of astronomy will benefit from such a highly sensitive survey instrument: from studies of galaxy formation and evolution in the early Universe to understanding star and planet formation in our own Galaxy. Due to be operational in 2006, SCUBA-2 will also act as a "pathfinder" for the new generation of submillimeter interferometers (such as ALMA) by performing large-area surveys to an unprecedented depth. The challenge of developing the detectors and multiplexer is discussed in this paper.
NAOMI (Nasmyth Adaptive Optics for Multi-purpose Instrumentation) is a recently completed and commissioned astronomical facility on the 4.2m William Herschel Telescope. The system is designed to work initially with Natural Guide Stars and also to be upgradeable for use with a single laser guide star. It has been designed to work with both near infrared and optical instrumentation (both imagers and spectrographs). The system uses a linearised segmented adaptive mirror and dual-CCD Shack-Hartmann wavefront sensor together with a multiple-DSP real-time processing system. Control system parameters can be updated on-the-fly by monitoring processes and the system can self-optimize its base optical figure to compensate for the optical characteristics of attached scientific instrumentation. The scientific motivation, consequent specification and implementation of NAOMI are described, together with example performance data and information on future upgrades and instrumentation.
The JCMT, the world's largest sub-mm telescope, has had essentially the same VAX/VMS based control system since it was commissioned. For the next generation of instrumentation we are implementing a new Unix/VxWorks based system, based on the successful ORAC system that was recently released on UKIRT.
The system is now entering the integration and testing phase. This paper gives a broad overview of the system architecture and includes some discussion on the choices made. (Other papers in this conference cover some areas in more detail). The basic philosophy is to control the sub-systems with a small and simple set of commands, but passing detailed XML configuration descriptions along with the commands to give the flexibility required. The XML files can be passed between various layers in the system without interpretation, and so simplify the design enormously. This has all been made possible by the adoption of an Observation Preparation Tool, which essentially serves as an intelligent XML editor.
Within the last few years several manufacturers have been producing the 'next generation' of scientific CCDs. These devices have small pixels (approximately 15 micrometers), high UV and broad-band spectral response (greater than 80%), very low readout noise (less than 4 e- rms), large format (2048*4096) and close butting capability. We present examples of recent data taken on the WHT (at the Roque de los Muchachos Observatory, La Palma) obtained from one such device -- the EEV CCD42 array. The detector has been used for spectroscopy and direct imaging with excellent results. Design and performance details, as well as various special operational modes will be discussed. This device has been adopted for scientific imaging on the Gemini telescopes, as well as several other major observatories -- and so these first operational results should demonstrate the power of these new sensors. Variants of the CCD42 design are now being made to yield slightly different architectures and packaging options. We will compare predicted with actual performance, and discuss characteristics and applications of this new sensor.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.