Tapered optical fiber-based interferometric sensors have potential applications in some fields for the measurements of solution concentration, refractive index, biomolecules, etc. By coating specific functional film onto the surface of a tapered optical fiber, it is possible to further extend the detection range and enhance the measurement sensitivity. In this paper, a tapered optical fiber sensor based on Mach-Zehnder modal interference is studied. An atactic polystyrene thin film was used as a functional layer to coat onto the surface of the tapered region. Detection of aqueous glucose of different concentrations was carried out using the tapered fiber sensor with or without the coating. The experimental results show that the measurement sensitivity can be significantly improved by coating the atactic polystyrene thin film onto the tapered fiber with suitable waist parameter.
Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some largescale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/°C. It is expected that the apodized grating array can find more applications in many fields.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.