With the increasing integration of optical devices, the requirements for couplers are becoming higher. Nowadays, the couplers not only need to achieve high coupling efficiency, but also achieve a small footprint. In this paper, we propose a broadband and compact edge coupler based on silicon nitride. High coupling efficiency and small footprint can be achieved through a non-linear taper consist of five silicon nitride segments. Aiming at the problem that many relevant parameters introduced by the introduction of five segments and it is difficult to optimize, we select different parameter scanning ranges through the characteristics of different change rates of effective refractive index in different width ranges. So as to design a coupler with high coupling efficiency and small volume. The total length of the coupler is only 91 um, and the coupling efficiency can reach 92.24%. Furthermore, the proposed coupler model has good performance in 1270-1330 nm bandwidth, and the difference between the maximum and minimum coupling efficiency is only 2.48%. At the same time, the 1dB error tolerance of the model can reach 1000 nm.
With the increasing integration of optical devices, optical integration technology is becoming more and more important. In this paper, we propose double-stage end coupler based on SiO2. The double stage taper structure greatly shortens the size of the coupler and ensures a high coupling efficiency. In this paper, we take an arrayed waveguide grating output waveguide and a ridge waveguide of photodetector as application scenarios, the cross-sectional areas of the two are 4.5× 4.5 um and 2×1.04 um respectively. Then, the coupler parameters are designed. By adding couplers, we can improve the coupling efficiency from 73.3% to 96.4%. At the same time, the length of the proposed coupler is only 900um. In addition, the model also has wider operation bandwidth, lower polarization dependence loss and larger alignment error tolerance. The coupling efficiency of the model in the 1270 - 1350 nm band is higher than 94.8%. At the same time, the polarization dependence loss is only 0.35dB, and the alignment error tolerance of 1 dB is more than 1500 nm, which ensures the model can be well applied to the field of photonic integration.
Ensuring information security is of great significance to a satellite communication system. In this paper, a chaotic encryption scheme is proposed for a satellite communication system. Firstly, five chaotic sequences are generated by a five-dimensional chaotic system. And then, XOR, scrambling and interpolation are performed on the data in turn. The simulation results show that the bit error rate of this method approaches 0 when the SNR is greater than 18, and the bit error rate of the illegal receiver is as high as 35.3% when the correct key is unknown. Therefore, secure communication can be achieved.
This paper proposes a novel 5-dimensional hyperchaotic coupling synchronization system for physical layer security in OFDM satellite systems. The proposed approach is designed based on the Lyapunov stability theory. The proposed chaotic-based satellite data encryption/decryption system is validated using a numerical simulation study. Additionally, to demonstrate the efficiency of the proposed chaotic encryption structure, we analyzed its key space. The proposed chaotic encryption structure is very sensitive to the initial key, and a tiny discrepancy as small as 10−19 would lead to a completely different sequence. The key space of the proposed scheme is up to 10340.
To resolve the mode field diameter mismatch between silicon waveguide and fiber and to obtain the better alignment tolerances in the horizontal and vertical directions, a novel high coupling efficiency fiber-to-chip edge coupler with four auxiliary thin layers is proposed. The edge coupler consists of two segments. The first section is composed of a straight waveguide and four tapered auxiliary thin layers around the aforementioned waveguide. At the facet, the thin layers are arranged as a closed square, which can capture a large area of light from the fiber to form a superimposed mode. Along the light propagation direction, the four thin layers are taper structures, which facilitates the evolution of the superimposed mode. The second section is an inverted taper silicon waveguide, which is able to transfer the superimposed mode from the first section adiabatically into the silicon waveguide. The coupling efficiency of the edge coupler is determined by both overlap efficiency and mode conversion efficiency. In order to improve the coupling efficiency, we simulate as well as optimize several important parameters by FDE method and EME method. And we calculate the alignment tolerances by moving the position of the fiber in the horizontal and vertical directions. In conclusion, the simulated highest overlap efficiency is 93.9% and the mode conversion efficiency is 98.6%, thus, the total coupling efficiency is 92.6% for fundamental mode and the 3-dB alignment tolerances in horizontal and vertical directions are about ± 3.5 μm, ± 3.2 μm, respectively.
We experimentally demonstrated a novel structure for generating an optical frequency comb source for multicarrier modulation in an optical transmission system. In the proposed scheme, the integration of an electroabsorption-modulated laser cascaded with a phase modulator is employed, both of which are driven and synchronized via a common sinusoidal radio frequency signal. The optimal operating range defined as a spectral flatness with less than 3-dB power fluctuation can be obtained through numerical simulation. Using the proposed scheme, we can achieve 10 flat-topped and frequency-locked optical carriers with a 12.5-GHz frequency spacing. On–off-keying intensity-modulated signals with 3.125 and 12.5 Gb / s are transmitted error-free over 20 km standard single-mode fiber utilizing the proposed optical frequency comb source for an optical wavelength-division multiplexing transmission system.
We propose frequency domain shifting and time domain scrambling method based on 4D hyper-Chen chaos to improve physical-layer security of CO-OFDM systems. The proposed encryption scheme has key space of 10429 and can combat exhaustive attacks effectively.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.