Paper
12 August 1986 EXAFS And Reflectivity Studies Of Surfaces And Interfaces Using Glancing Angle X-Rays
S. M. Heald, H. Chen, J. M. Tranquada
Author Affiliations +
Abstract
X-rays at glancing angles have a short controllable penetration depth which can be used to advantage in studying surfaces and interfaces. Data are presented for Cu-Al and Ag-Au bilayers which demonstrate the utility of x-ray reflectivity and extended x-ray absorption fine structure (EXAFS) measurements. X-ray reflectivity measurements are sensitive to layer thickness and interface roughness, while the EXAFS probes the atomic scale envir'onment of the interface atoms. As the samples are annealed clear changes are observed in both techniques indicative of the growth of interfacial CuAl2 for the Cu-Al samples and interdiffusion for Ag-Au. Interface sensitivity is verified for the Cu-Al samples by the observations that the EXAFS signal changes from Cu-like to CuAl2-like with the growth of ~ 100 A of CuAl2. Quantitative fits to the x-ray reflectivity data are used to obtain interface roughness, and indicate that the growing CuAl2 layer has a roughness comparable to its thickness. This is consistent with compound growth proceeding predominantly along grain boundaries.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. M. Heald, H. Chen, and J. M. Tranquada "EXAFS And Reflectivity Studies Of Surfaces And Interfaces Using Glancing Angle X-Rays", Proc. SPIE 0690, X-Rays in Materials Analysis: Novel Applications and Recent Developments, (12 August 1986); https://doi.org/10.1117/12.936595
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interfaces

Reflectivity

Copper

Gold

Aluminum

Silver

Luminescence

Back to Top