Paper
30 January 1990 Optical Fibre Temperature Sensor Based On A Blackbody Radiation
Ryszard Hypszer, Jerzy Plucinski, Henryk J. Wierzba
Author Affiliations +
Proceedings Volume 1085, Optical Fibres and Their Applications V; (1990) https://doi.org/10.1117/12.952993
Event: Optical Fibers and Their Applications V, 1989, Warsaw, Poland
Abstract
The principle of operation of the fibre optical temperature sensor based on a blackbody radiation and its construction model is given in the paper. A quartz rod of 0.6 mm diameter and 20 cm length with a blackbody cavity at the one end was used to construct the sensor. The cavity was made by vacuum evaporation of a chromium layer and a silicone monooxide layer was used as a protection. Infrared radiation is transmitted by the fibre optic to the detection circuit. This sensor enables temperature measurement from 400 to 1200°C. The range of measurement is determined by the detection sensitivity and by rod softening. The resolution is of the order of 10-2°C. The sensor calibration was done by using PtRh1O-Pt thermocouple.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ryszard Hypszer, Jerzy Plucinski, and Henryk J. Wierzba "Optical Fibre Temperature Sensor Based On A Blackbody Radiation", Proc. SPIE 1085, Optical Fibres and Their Applications V, (30 January 1990); https://doi.org/10.1117/12.952993
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Sensors

Black bodies

Quartz

Temperature metrology

Fiber optics

Photodetectors

Back to Top