Paper
16 October 2019 Determination of surface profiles of transparent plates by means of frequency estimation with wavelength tuning interferometry
Author Affiliations +
Proceedings Volume 11205, Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019); 112051L (2019) https://doi.org/10.1117/12.2541791
Event: Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019), 2019, Phuket, Thailand
Abstract
The information about the profiles of both surfaces of the transparent plate are contained in an interferogram. This information can be extracted by processing fringe patterns measured at different wavelengths. The conventional Fourier analysis applied to solve such problems with a set of a restricted number of the fringe patterns, otherwise this analysis is quite sensitive to the error of frequency drift and suffers from fringe patterns interference noise. This study proposes a method of frequency estimation to obtain profiles of surfaces of transparent plate. A series of fringe patterns obtained at different phase shift caused by wavelength changing are regarded as a set of overlapped sinusoidal signal. Using Total Least Squares method to find the frequency of different signal to attain the separation of interferogram. The simulation shows that the proposed method has the immunity from noise interference.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiwei Zheng, Tao Sun, Qulei Xu, and Yingjie Yu "Determination of surface profiles of transparent plates by means of frequency estimation with wavelength tuning interferometry", Proc. SPIE 11205, Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019), 112051L (16 October 2019); https://doi.org/10.1117/12.2541791
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fringe analysis

Interferometry

Phase shifts

Wavelength tuning

Phase shifting

Error analysis

Interferometers

Back to Top