Paper
17 April 2020 Design of optical axis jitters rejecting controller with lag compensator
Long Ou, Jingliang Gu, Chuanlin Xie
Author Affiliations +
Proceedings Volume 11455, Sixth Symposium on Novel Optoelectronic Detection Technology and Applications; 1145570 (2020) https://doi.org/10.1117/12.2565312
Event: Sixth Symposium on Novel Photoelectronic Detection Technology and Application, 2019, Beijing, China
Abstract
Due to the thermal effects, the airflow disturbance and the platform vibration, the random jitters of laser axis are caused, which have a serious impact on the laser coherent combining. If the conventional PID controller is used to reject the disturbance, the control bandwidth will be lager, but the high frequency noise of the system will be significantly amplified, so that the control error increases. The open-loop disturbance data spectrum is analyzed to add a lag compensator. The results show that the system has a good effect on rejecting the jitters of the middle-and-low frequency optical axis, while the high frequency noise has on amplification effect, which decreases the control error of the system.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Long Ou, Jingliang Gu, and Chuanlin Xie "Design of optical axis jitters rejecting controller with lag compensator", Proc. SPIE 11455, Sixth Symposium on Novel Optoelectronic Detection Technology and Applications, 1145570 (17 April 2020); https://doi.org/10.1117/12.2565312
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Device simulation

Optical design

Adaptive optics

Fiber lasers

Signal attenuation

Laser applications

RELATED CONTENT


Back to Top