Paper
11 March 2022 Simulation analysis of the influence of leakage location and flow rate on the leakage of liquid ammonia tank
Jianlu Cheng, Jiang Shen, Lu Jia, Kaiyong Hu
Author Affiliations +
Proceedings Volume 12160, International Conference on Computational Modeling, Simulation, and Data Analysis (CMSDA 2021); 1216011 (2022) https://doi.org/10.1117/12.2627902
Event: International Conference on Computational Modeling, Simulation, and Data Analysis (CMSDA 2021), 2021, Sanya, China
Abstract
A numerical simulation analysis based on Computational Fluid Dynamics (CFD) was used to study the leakage of ammonia storage tank in the Beijing Winter Olympics snowmobile sled stadium. The leak location and leak flow rate were varied to investigate their effects on the dispersion profile. Different positions of leakage points of ammonia storage tank led to different dangerous regions. With the same flow rate, the dangerous area caused by the leakage on the left side of the liquid ammonia storage tank is the largest. However, the leakage from the top of the storage tank has almost no effect on the ammonia concentration near the ground. When the bottom leaks, the high concentration of ammonia gas is mainly gather near the ground. The work in this paper can provide technical support for improving the safety of ammonia leakage accident.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianlu Cheng, Jiang Shen, Lu Jia, and Kaiyong Hu "Simulation analysis of the influence of leakage location and flow rate on the leakage of liquid ammonia tank", Proc. SPIE 12160, International Conference on Computational Modeling, Simulation, and Data Analysis (CMSDA 2021), 1216011 (11 March 2022); https://doi.org/10.1117/12.2627902
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffusion

Liquids

Mathematical modeling

Numerical simulations

Safety

Turbulence

Gases

Back to Top