Paper
14 October 2022 Effect of wavelength on HAZ and processing efficiency in CFRP ablated by femtosecond laser at different wavelengths
Author Affiliations +
Proceedings Volume 12343, 2nd International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2022); 123431V (2022) https://doi.org/10.1117/12.2648394
Event: 2nd International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2022), 2022, Qingdao, China
Abstract
As a new lightweight material, Carbon Fiber-reinforced polymer (CFRP) has been widely used in various fields, but its difficult-to-machine characteristic also severely restricts its application. In this paper, femtosecond laser with center wavelength of 400nm and 800nm was used for multi-pass scanning processing of CFRP to study the relationship between laser wavelength and processing quality and processing efficiency, and try to obtain smaller heat affected zone (HAZ). The experimental results show that when the experimental conditions are the same, the HAZ obtained by femtosecond laser processing of CFRP with the wavelength of 400 nm is about half that of the wavelength of 800 nm, and the minimum can reach 1.5μm, but the width of slit is smaller than that obtained by femtosecond laser processing with the wavelength of 800 nm. Therefore, reducing the wavelength of femtosecond laser can effectively reduce the HAZ, but at the same time, it will also reduce the processing efficiency.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhipeng Liu and Baoshan Guo "Effect of wavelength on HAZ and processing efficiency in CFRP ablated by femtosecond laser at different wavelengths", Proc. SPIE 12343, 2nd International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2022), 123431V (14 October 2022); https://doi.org/10.1117/12.2648394
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Femtosecond phenomena

Carbon

Laser energy

Fiber reinforced polymers

Laser optics

RELATED CONTENT


Back to Top