Design and implementation of verification device for dissolved oxygen tester

Bo Li; Zhike Zhao; Jing Yuan; Wenjia Lu; Chao Shen; Cheng Guan

doi:10.1117/12.3004148

11 October 2023 Design and implementation of verification device for dissolved oxygen tester

Bo Li, Zhike Zhao, Jing Yuan, Wenjia Lu, Chao Shen, Cheng Guan

Proceedings Volume 12800, Sixth International Conference on Computer Information Science and Application Technology (CISAT 2023); 128006B (2023) https://doi.org/10.1117/12.3004148
Event: 6th International Conference on Computer Information Science and Application Technology (CISAT 2023), 2023, Hangzhou, China

Abstract

Due to the low validation efficiency and large human error of the dissolved oxygen tester, a new calibration device was developed for the dissolved oxygen validation, which has the functions of accurately controlling the experimental temperature, accurately measuring the atmospheric pressure, and automatically calculating the standard value of dissolved oxygen. The temperature and concentration homogeneity of the liquid to be probed are two important parameters that affect the validation results. In this paper, we use the Fluent simulation software to model and simulate the uniform distribution of temperature and dissolved oxygen concentration in a validation tank. When the temperature of the verification device is set at 10°C, 20°C and 30°C respectively, each 10 mm is selected as a measurement plane in the range of 10 mm to 80 mm of the detection depth, and five test points are selected on each measurement plane to carry out simulation tests. The experimental results show that the concentration of dissolved oxygen is less than 0.27% uniform within the same measurement plane and less than 0.39% uniform between different measurement planes. To verify the validation effectiveness of the proposed device, three dissolved oxygen testers from different manufacturers were selected for the validation work. The error of temperature indication value of the three instruments is not more than ±0.1 °C, the measurement repeatability is not more than 0.02 mg/L, and the error of dissolved oxygen concentration indication value is not more than ±0.08 mg/L, which all meet the requirements of verification regulations. The results show that the proposed device can be effectively applied for the validation of dissolved oxygen meters.

(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Bo Li, Zhike Zhao, Jing Yuan, Wenjia Lu, Chao Shen, and Cheng Guan "Design and implementation of verification device for dissolved oxygen tester", Proc. SPIE 12800, Sixth International Conference on Computer Information Science and Application Technology (CISAT 2023), 128006B (11 October 2023); https://doi.org/10.1117/12.3004148

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Oxygen

Temperature metrology

Sensors

Design and modelling

Fluorescence

Water

Equipment

Show All Keywords

Keywords/Phrases

Search In:

Publication Years