Paper
19 January 2024 To the calculation of energy efficiency indicators of single-screw pumps
Natalya Akhmedova, Vladimir Naumov
Author Affiliations +
Proceedings Volume 12986, Third International Scientific and Practical Symposium on Materials Science and Technology (MST-III 2023); 1298618 (2024) https://doi.org/10.1117/12.3018073
Event: Third International Scientific and Practical Symposium on Materials Science and Technology (MST-III 2023), 2023, Dushanbe, Tajikistan
Abstract
Test results from manufacturers of single screw pumps were studied. The expended power of a single-screw pump is directly proportional to the rotor speed. The proportionality coefficient represents the mechanical work of a single screw pump per revolution and increases linearly with increasing pressure drop. Energy efficiency and Specific energy consumption indicators were calculated for the Vulcan series single screw pump. Both indicators improve with increasing rotor speed: energy efficiency increases, specific energy consumption decreases. No maximum efficiency was found when the rotor speed changed in the studied range. If the frequency is fixed, then there is a maximum efficiency at a certain pressure drop. At higher pressure values, both indicators worsen. At lower pressure values, the energy efficiency indicator decreases, and the specific energy consumption indicator shows better energy efficiency. Therefore, when selecting single-screw pumps for operation under these conditions, the specific energy consumption indicator, and not the efficiency, should be taken into account.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Natalya Akhmedova and Vladimir Naumov "To the calculation of energy efficiency indicators of single-screw pumps", Proc. SPIE 12986, Third International Scientific and Practical Symposium on Materials Science and Technology (MST-III 2023), 1298618 (19 January 2024); https://doi.org/10.1117/12.3018073
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top