Paper
4 October 1994 Environmental testing of a linear time-division-multiplexed optical position sensor
Donald L. McCorvey III, Fernando Dones
Author Affiliations +
Abstract
Frost condensing on the code plate of an optical transducer may cause degraded performance by diffusing reflected light. A test was performed to evaluate effects of temperature and humidity on a prototype time domain multiplexed optical position sensor. Temperature was varied from -55 to 125 degree(s)C and humidity from 0 to 100%. In addition, the test attempted to generate frost inside the transducer to interfere with operation of its code plate and read head. Overall, there were no significant losses due to humidity. There was no direct evidence that frost was present on the code plate at any time, though given the mechanical resistance of the transducer shaft at low temperature points, it appears likely that there was some frost buildup. Temperature effects were more pronounced as a loss of 2 dB or more was observed at low temperatures. There was no evidence of frost-induced losses.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Donald L. McCorvey III and Fernando Dones "Environmental testing of a linear time-division-multiplexed optical position sensor", Proc. SPIE 2295, Fly-by-Light, (4 October 1994); https://doi.org/10.1117/12.188842
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Humidity

Position sensors

Head

Environmental sensing

Multiplexing

Photography

Back to Top