Paper
20 April 1995 Monitoring of corrosion in steel structures using optical fiber sensors
Kim D. Bennett, L. R. McLaughlin
Author Affiliations +
Abstract
A prototype optical fiber sensor for monitoring corrosion on large steel structures has been designed and tested with favorable results. The sensor works by pulling a multimode fiber into a tight bend and securing it with a `corrosion fuse.' When the fuse corrodes, it eventually breaks and allows the fiber to straighten. The resulting difference in optical intensity emerging from the fiber is measurable using an OTDR or other optical detector. Initial experiments were carried out to determine the effect of bending fibers in a small radius and showed the feasibility of the device. Following, tests were performed on three in-line sensors in a simulated corrosive atmosphere and showed that this cheap and easily implemented monitoring scheme could be used to infer the presence of corrosion at different locations, and/or the degree of corrosion at a single location.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kim D. Bennett and L. R. McLaughlin "Monitoring of corrosion in steel structures using optical fiber sensors", Proc. SPIE 2446, Smart Structures and Materials 1995: Smart Systems for Bridges, Structures, and Highways, (20 April 1995); https://doi.org/10.1117/12.207744
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Corrosion

Fiber optics sensors

Optical fibers

Prototyping

Environmental sensing

Graded index fibers

Back to Top