Paper
28 May 1997 Fabry-Perot interferometer system for high-speed velocity measurement
Lun K. Cheng, Anastasius J.A. Bruinsma, Wim C. Prinse, Kees Smorenburg
Author Affiliations +
Proceedings Volume 2869, 22nd International Congress on High-Speed Photography and Photonics; (1997) https://doi.org/10.1117/12.273410
Event: 22nd International Congress on High-Speed Photography and Photonics, 1996, Santa Fe, NM, United States
Abstract
The Fabry-Perot Velocity Interferometer System (F-PVIS) is designed and built for measuring the Doppler shift of light by recording positional changes in the interferometric pattern behind the Fabry-Perot interferometer. The velocity of a surface can be deduced from the Doppler shift which is caused by reflection on the moving surface. The finesse of the Fabry-Perot interferometer is found to be about 50. The F-PVIS is designed for measuring velocities of up to 20 km/s. The sensitivity of this system can be tuned by changing the distance between the Fabry-Perot mirrors. In the most sensitive state of operation, the accuracy is found to be better than 100 m/s while the time resolution is typically a few ns. In addition to the velocity measurement of the moving surface in the electric gun experiments, the fiber optic F-PVIS can be used for other measurements. By embedding the optical fiber into the target material, information about the shock wave inside the target can be achieved.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lun K. Cheng, Anastasius J.A. Bruinsma, Wim C. Prinse, and Kees Smorenburg "Fabry-Perot interferometer system for high-speed velocity measurement", Proc. SPIE 2869, 22nd International Congress on High-Speed Photography and Photonics, (28 May 1997); https://doi.org/10.1117/12.273410
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fabry–Perot interferometry

Streak cameras

Velocity measurements

Coating

Reflectivity

Fiber optics

Mirrors

Back to Top