Paper
20 September 1996 Magnetic and magneto-optical properties of Co-Pt alloy films before and after vacuum annealing
Ming Li, Zhihong Jiang, Defang Shen, Qinwo Shen
Author Affiliations +
Abstract
Co-Pt alloy films with perpendicular magnetic anisotropy and 100 percent remanence ratio were successfully prepared using e-beam coevaporation. A series of vacuum annealing was done on these alloy samples to study their thermal stability. The experimental results were as follows: a) For annealing temperature at 200 to approximately 300 degrees C, the Kerr rotation angle was almost unchanged or presented a slow decrease with the lasting of annealing, and the increase in coercivity was also small; b) For annealing temperature above 300 degrees C, both coercivity and Kerr rotation angle dropped prominently, and in the mean time magnetization became partly in-plane; c) Thermal stability is also probably a problem that needs to be solved for CoPt alloy films. The change of magnetic and magneto-optical properties of Co-Pt alloy films during annealing was considered to be related to the strength variation of different textures in films.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming Li, Zhihong Jiang, Defang Shen, and Qinwo Shen "Magnetic and magneto-optical properties of Co-Pt alloy films before and after vacuum annealing", Proc. SPIE 2890, Optical Recording, Storage, and Retrieval Systems, (20 September 1996); https://doi.org/10.1117/12.251981
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Annealing

Magnetism

Anisotropy

Platinum

Chemical species

Diffusion

Multilayers

Back to Top