Paper
26 July 1999 Extending the limits of i-line lithography for via layers and minimization of dense-iso bias
Ramkumar Subramanian, Chris A. Spence, Luigi Capodieci, Thomas Werner, Ernesto Gallardo
Author Affiliations +
Abstract
This paper describes the result of patterning contact holes on a TEOS substrate with 365 nm lithography using both binary and phase shift mask techniques. The target CD on the wafer was 0.34 micrometers and the minimum pitch was 0.63 micrometers . Results show significant improvement in depth-of-focus using the phase-shift mask. With the binary mask we obtained 0.6- micrometers DOF for both isolated and dense contact holes while with the phase-shift mask we obtained 1-micrometers DOF. Using the phase-shift mask we can also improve the linearity slightly for dense contacts and significantly for isolated contacts. The effect of pitch on contact size was also studied, showing that the intermediate pitch contacts print larger than the isolated or minimum pitch contacts. Using a mask- to-wafer bias of 60-80nm the largest bias between contacts of various sizes was 25 nm.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ramkumar Subramanian, Chris A. Spence, Luigi Capodieci, Thomas Werner, and Ernesto Gallardo "Extending the limits of i-line lithography for via layers and minimization of dense-iso bias", Proc. SPIE 3679, Optical Microlithography XII, (26 July 1999); https://doi.org/10.1117/12.354409
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Lithography

Printing

Binary data

Semiconducting wafers

Deep ultraviolet

Optical lithography

RELATED CONTENT


Back to Top