Paper
13 August 1999 Time-division-multiplexed 3D shearography
Author Affiliations +
Proceedings Volume 3744, Interferometry '99: Techniques and Technologies; (1999) https://doi.org/10.1117/12.357738
Event: International Conference on Optical Metrology, 1999, Pultusk Castle, Poland
Abstract
The development of a time-division-multiplexed 3D digital shearography instrument is described. The system provides simultaneous measurement of the in-plane and out-of-plane deformation gradients, allowing full surface strain analysis. The object under investigation is sequentially illuminated from three directions by three fiber coupled high power laser diode sources, and imaged onto a CCD camera through a single shearing interferometer. The pulsing of the sources is synchronized with the camera frame rate. Phase stepping is achieved using laser diode wavelength tuning combined with a path length imbalance in the shearing interferometer. The source pulsing schedule and image acquisition are controlled from a PC. An analysis of the optimum illumination geometry is presented. The performance of the system is evaluated on laboratory test samples.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen W. James and Ralph P. Tatam "Time-division-multiplexed 3D shearography", Proc. SPIE 3744, Interferometry '99: Techniques and Technologies, (13 August 1999); https://doi.org/10.1117/12.357738
Lens.org Logo
CITATIONS
Cited by 22 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top