Paper
23 June 2000 Optimizing of thin-film interference effects in KrF lithography for 0.15-μm design rules
Seung-Chul Oh, Young-Cheol Kim, Sang-Hoon Nah, Hoon Huh, Sang-Bum Han
Author Affiliations +
Abstract
This paper describes the interesting performance for KrF excimer laser lithography at low k1 process in Rayleigh criteria. For 0.15 micrometer lithography process, the experiments have been performed by using resolution enhancement techniques (RET) such as phase shift masks (PSM), off-axis illumination (OAI), 0.63 high NA, and high contrast resist. Especially for the gate level CD control, we have investigated the thin film interference effects of oxide, resist and BARC thickness variation by simulation and experimental. Also, we have experimentally compared the CD control performance and the process window with oxide thickness variation on actual device wafers, because the oxide thickness variation enhances thin film interference effects. Finally, we determined the most suitable conditions for providing sufficient protection against reflection by controlling the substrate film thickness. Furthermore, requirements for 0.15 micrometer gate level CD control are discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seung-Chul Oh, Young-Cheol Kim, Sang-Hoon Nah, Hoon Huh, and Sang-Bum Han "Optimizing of thin-film interference effects in KrF lithography for 0.15-μm design rules", Proc. SPIE 3999, Advances in Resist Technology and Processing XVII, (23 June 2000); https://doi.org/10.1117/12.388379
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Thin films

Critical dimension metrology

Lithography

Reflectivity

Photomasks

Semiconducting wafers

Back to Top