Paper
16 October 2001 1x7 plastic optical fiber coupler using cylindrical mixing rod
Chun Yang, Xiaohan Sun, Yunming Wang, Mingde Zhang, Dong Ding
Author Affiliations +
Proceedings Volume 4603, Fiber Optics and Optoelectronics for Network Applications; (2001) https://doi.org/10.1117/12.444557
Event: International Symposium on Optoelectonics and Microelectronics, 2001, Nanjing, China
Abstract
A novel low-cost 1í+7 plastic optical fiber coupler using cylindrical mixing-rod is proposed. Comparing with conventional tapered mixing-rod plastic optical fiber 1í+7 coupler, the proposed coupler, which uses cylindrical POF as mixing-rod instead of tapered POF in order to save the high demanding POF tapering process, is much lower at cost and only a little deteriorate at crosstalk. The increased crosstalk and its power penalty are theoretically calculated showing that crosstalk lower than 20dB results in insignificant power penalty. The coupler was experimentally tested showing an excess loss of less than 2.5dB and uniformity less than 3.56dB.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chun Yang, Xiaohan Sun, Yunming Wang, Mingde Zhang, and Dong Ding "1x7 plastic optical fiber coupler using cylindrical mixing rod", Proc. SPIE 4603, Fiber Optics and Optoelectronics for Network Applications, (16 October 2001); https://doi.org/10.1117/12.444557
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top