Airfoil drag elimination and stall suppression via piezoelectric dynamic tangential synthetic jet actuators

Ron Barrett; Jeremy Corpening; Christopher Reasonover

doi:10.1117/12.599094

17 May 2005 Airfoil drag elimination and stall suppression via piezoelectric dynamic tangential synthetic jet actuators

Ron Barrett, Jeremy Corpening, Christopher Reasonover

Proceedings Volume 5764, Smart Structures and Materials 2005: Smart Structures and Integrated Systems; (2005) https://doi.org/10.1117/12.599094
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

This paper describes a new method for drag elimination and stall suppression via tangential synthetic jet actuators. This boundary layer control (BLC) method is shown to perform as well as continuous and normal synthetic jet BLC methods but without fouling difficulties, system-level complexity or extreme sensitivity to Reynolds number. Classical laminated plate theory (CLPT) models of the piezoelectric actuators were used to estimate diaphragm deflections and volume per stroke. A 12” (30.5cm) chord, 6” (15.3cm) span NACA 0012 profile wing section was designed with three unimorph 10 mil (254μm) thick, 3.25” (8.23cm) square piezoelectric diaphragm plenums and five 1 mil (25μm) thick stainless steel valves spaced from 15%c to the trailing edge of the airfoil. Static bench testing showed good correlation between CLPT and experiment. Plenum volume per stroke ranged up to 5cc at 500 V/mm field strength. Dynamic testing showed resonance peaks near 270 Hz, leading to flux rates of more than 60 cu in/s (1 l/s) through the dynamic valves. Wind tunnel testing was conducted at speeds up through 13.1 ft/s (4 m/s) showing more than doubling of C_lmax. At low angles of attack and high flux rates, the airfoil produced net thrust for less than 4.1W of electrical power consumption.

Citation Download Citation

Ron Barrett, Jeremy Corpening, and Christopher Reasonover "Airfoil drag elimination and stall suppression via piezoelectric dynamic tangential synthetic jet actuators", Proc. SPIE 5764, Smart Structures and Materials 2005: Smart Structures and Integrated Systems, (17 May 2005); https://doi.org/10.1117/12.599094

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
12 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Actuators

Aerodynamics

Wind measurement

Control systems

Aerospace engineering

Fluid dynamics

Particles

Show All Keywords

Keywords/Phrases

Search In:

Publication Years