Paper
21 March 2006 A CMOS single-supply logarithmic amplifier for hearing aids
Soon Suck Jarng, Lingfeng Chen, You Jung Kwon
Author Affiliations +
Proceedings Volume 6040, ICMIT 2005: Mechatronics, MEMS, and Smart Materials; 604024 (2006) https://doi.org/10.1117/12.664247
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
The Log Amplifier described in this paper is designed for hearing aids (HA) application. It works on a low single-supply voltage (1.3V). The input signal varies between 0.01mV and 100mV. To give enough compensation to the hearing impairment, the amplifier provides a very large gain. The output swing is limited because of the low supply voltage and the large gain. Therefore, the logarithmic amplifier introduced into the design of HA to compress input signal so that the output distortion can be avoid. Another factor we use it here is that the amplifier has enough sensitivity and gain to deal with the compressed input signal without getting extra distortion coursed by the pre-process on input signal. The short channel CMOS devices play an important role in reduction of the supply voltage. DONG-BU ANAM 0.18 μm process is selected.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Soon Suck Jarng, Lingfeng Chen, and You Jung Kwon "A CMOS single-supply logarithmic amplifier for hearing aids", Proc. SPIE 6040, ICMIT 2005: Mechatronics, MEMS, and Smart Materials, 604024 (21 March 2006); https://doi.org/10.1117/12.664247
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Transistors

Resistance

Distortion

Resistors

Virtual colonoscopy

Device simulation

RELATED CONTENT


Back to Top