Paper
10 April 2007 Non-model based vibration control of stay cables using magneto-rheological damper
Author Affiliations +
Abstract
In this paper, a simple non-model based control strategy is developed to control stay cable vibration using MR dampers. The strategy is an integral plus double integral control based on the collocated accelerometer feedback. To experimentally study this control method, a model stay cable equipped with an Magneto-Rheological(MR) damper is used in this study. To demonstrate the effectiveness of the proposed controller, comparisons of the unimpeded stay cable, passive off, passive on and the proposed integral plus double integral control are conducted. For each case, the damping ratio of the stay cable vibration is calculated. Comparisons of the experimental results show that non-model based vibration control of the stay cable using the MR damper is most effective in reducing the stay cable vibration.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Min Liu, Gangbing Song, and Hui Li "Non-model based vibration control of stay cables using magneto-rheological damper", Proc. SPIE 6529, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2007, 65292J (10 April 2007); https://doi.org/10.1117/12.715415
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vibration control

Signal processing

Systems modeling

Digital signal processing

Control systems

Bridges

Power supplies

Back to Top