Paper
10 October 2007 Micro-optical components assembly for the fabrication of a miniaturized optoelectronic transducer
P. Corradi, L. Ascari, A. Menciassi, C. Laschi
Author Affiliations +
Proceedings Volume 6715, Optomechatronic Actuators and Manipulation III; 67150K (2007) https://doi.org/10.1117/12.754426
Event: International Symposium on Optomechatronic Technologies, 2007, Lausanne, Switzerland
Abstract
This paper describes the fabrication and, in particular, the assembly processes of a miniaturized micro-optical system, to be integrated on a hybrid flexible module, which hosts also electronics and microsensors. The whole module was conceived to be mass-produced in order to be distributed in skin-like structures for robotic tactile applications. Nevertheless, it is generally suitable for sensing applications where the flexibility and the thickness of the sensing network are primary requirements. The micro-optical system works as a part of an optoelectronic transducer where electric signals, generated by tactile MEMS sensors, are computed by a microcontroller that drives the micro-optical system. This consequently generates optical radiation, by means of integrated light emitting diodes (LEDs), to be coupled into optical fibers, which waveguide signals to a CMOS optical sensor. Micro-machining and micro-assembly processes of miniaturized components are critical steps in order to fabricate many of these modules according to the application requirements.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Corradi, L. Ascari, A. Menciassi, and C. Laschi "Micro-optical components assembly for the fabrication of a miniaturized optoelectronic transducer", Proc. SPIE 6715, Optomechatronic Actuators and Manipulation III, 67150K (10 October 2007); https://doi.org/10.1117/12.754426
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Sensors

Channel projecting optics

Optical fibers

Optoelectronics

Polymer optical fibers

Optical fabrication

Back to Top