Paper
30 August 2010 The thermal conductivity of LED under the influence of vacuum sputtering films
Author Affiliations +
Abstract
The thermal conductivity has the important influence in quantum effect of light emitting diodes (LED) especially in high brightness light emitting diodes (HB LED). One of the biggest challenges is efficient heat transfer from PCB to aluminum plate when it base on printed circuit board (PCB). Because it enables transfer the heat from electric device to the aluminum plate, which completely removes the heat. In this study, alumina (Al2O3), alumina nitride (AlN) and zinc sulfide (ZnS) films soldered the HB LED lamps to enhance the heat transfer. All of the films were fabricated onto 1070 aluminum substrate by vacuum sputtering technology. The dielectric coatings were characterized by several subsequent analyses, especially the measurement of thermal resistance. The X-Ray diffraction (XRD) diagram analysis reveals three kinds of ceramic thin films were successfully grown on the individual substrate. Moreover, the alumina nitride coating has low sheet resistivity, high hardness, high critical load, and good thermal conduction, 200 W/m-K, as compared to those of Al2O3 and ZnS films.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming-Seng Hsu, Chung-Chih Chang, and Yau-Chyr Wang "The thermal conductivity of LED under the influence of vacuum sputtering films", Proc. SPIE 7781, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications IV, 77810T (30 August 2010); https://doi.org/10.1117/12.859852
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Thin films

Sputter deposition

Zinc

Aluminum

Thin film coatings

Ceramics

RELATED CONTENT


Back to Top