Super-compliant metallic electrodes for electroactive polymer actuators

Florian Habrard; Jörg Patscheider; Gabor Kovacs

doi:10.1117/12.918274

3 April 2012 Super-compliant metallic electrodes for electroactive polymer actuators

Florian Habrard, Jörg Patscheider, Gabor Kovacs

Proceedings Volume 8340, Electroactive Polymer Actuators and Devices (EAPAD) 2012; 834013 (2012) https://doi.org/10.1117/12.918274
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2012, San Diego, California, United States

Abstract

Electroactive polymer (EAP) actuators are compliant capacitors, where a thin elastomer film is sandwiched between two compliant electrodes. When a high DC voltage is applied to the electrodes, the arising electrostatic pressure squeezes the elastomer film in thickness and thus the film expands in planar directions. They are very promising candidates for "artificial muscles" development. Dielectric elastomer transducers benefit of important advantages compared to other electro-mechanical actuators: high energy density, large and noise-free deformation capability and low cost materials. However, if EAP devices have to be cheap, they work at high voltage (> 1000 V) leading to need for expensive electronics. Such operating conditions preclude their use close to the human body. The electrode material is also a challenge, since clean and fast processes suited to miniaturization of EAP devices are still missing. To solve these drawbacks, we are developing a new fabrication process aiming at reducing the dielectric layer thickness down to <20μm and to increase the efficiency using highly conductive electrode materials deposited by magnetron sputtering. In this work, we show how we succeed in finding the conditions for deposition of compliant metallic thin films that are able to maintain high conductivity at more than 10% stretching. The films are characterized by X-Ray Diffraction, electrical conductivity measurements and Atomic Force Microscopy.

Citation Download Citation

Florian Habrard, Jörg Patscheider, and Gabor Kovacs "Super-compliant metallic electrodes for electroactive polymer actuators", Proc. SPIE 8340, Electroactive Polymer Actuators and Devices (EAPAD) 2012, 834013 (3 April 2012); https://doi.org/10.1117/12.918274

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available