Optimized laser beam widths meter calibration system: precisely positioning of detector measurement plane

Yanping Wang; Qianqian Wang; Chong Ma

doi:10.1117/12.2038192

19 December 2013 Optimized laser beam widths meter calibration system: precisely positioning of detector measurement plane

Yanping Wang, Qianqian Wang, Chong Ma

Author Affiliations +

Proceedings Volume 9046, 2013 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems; 90461F (2013) https://doi.org/10.1117/12.2038192
Event: International Conference on Optical Instruments and Technology (OIT2013), 2013, Beijing, China

Abstract

The direct substitution method is used in the laser beam widths meter (usually the laser beam profiler) calibration. The laser beam widths measurement results of device under test (DUT) are compared with those made by the laboratory standard. For most laser beam widths meter, the detector measurement plane is installed inside detector head, so it is difficult to accurately position the measurement plane for both standard and DUT. Depending on the ocular estimation, the difference of measurement plane between standard and DUT is usually controlled within 5mm. For 2.5mrad divergence angle of laser beam, 5mm tolerance will cause an uncertainty of 12.5μm in the beam widths measurement. In the optimized calibration system, a wedge prism placed in the beam path produces a precise beam deflection, which results in the laser spot displacement on the measurement plane. Depending on the measurable displacement of beam centroid position and the beam deflection angle, the distance from the wedge prism to the detector measurement plane is determined. The experimental results show that using the measurement plane positioning method, the difference of measurement plane between standard and DUT is close to 80μm, only contributing an uncertainty of 0.125μm in final result with the same 2.5mrad beam divergence angle. In additional, some factors affecting precisely positioning of measurement plane are analyzed in this paper.

Citation Download Citation

Yanping Wang, Qianqian Wang, and Chong Ma "Optimized laser beam widths meter calibration system: precisely positioning of detector measurement plane", Proc. SPIE 9046, 2013 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 90461F (19 December 2013); https://doi.org/10.1117/12.2038192

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available