Paper
3 September 2015 Measuring NIRCam's position and orientation in 6 DOF using one reference mirror surface inside an environmental chamber
Paul F. Schweiger, Torben B. Andersen
Author Affiliations +
Abstract
The Near Infrared Camera (NIRCam) instrument used to align and obtain science data for NASA’s James Webb Space Telescope (JWST) was tested at the module level at flight-like cryogenic temperature. This paper explains the background that created the innovative techniques used to measure NIRCam’s modules alignments in 6 degrees of freedom (DOF) inside a thermal vacuum chamber. All 6 DOF were measured remotely, through a single chamber window port, using only a flat reference mirror/reticle surface mounted on each module. This measured orientation was then used to determine the optical input axis and entrance pupil for each module. The accuracy achieved was on the order of 20 microns in position and 5 arc seconds in angular orientation.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul F. Schweiger and Torben B. Andersen "Measuring NIRCam's position and orientation in 6 DOF using one reference mirror surface inside an environmental chamber", Proc. SPIE 9582, Optical System Alignment, Tolerancing, and Verification IX, 958209 (3 September 2015); https://doi.org/10.1117/12.2189098
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reticles

James Webb Space Telescope

Cameras

Mirrors

Cryogenics

Environmental sensing

Autocollimation

Back to Top