Paper
1 July 2015 Strain characteristics of selectively infiltrated photonic crystal fibers
WenBing Yu, Ying Wang, Jie Tian
Author Affiliations +
Proceedings Volume 9655, Fifth Asia-Pacific Optical Sensors Conference; 96552A (2015) https://doi.org/10.1117/12.2183600
Event: Fifth Asia Pacific Optical Sensors Conference, 2015, Jeju, Korea, Republic of
Abstract
To obtain the strain sensing for the high sensitivity PCF (Photonic Crystal Fibers), the high refractive index mixture is infiltrated into the air hole of the PCF. In this paper, we propose to adjust the infiltrated length of the air hole in order to make the loss maximum. The goal is to realize the PCF sensor with high sensitive strain. The experimental results show that the strain sensitivity is about 4.36 pm / μ ε when the infiltrated length is 30mm and the refractive index of the liquid is 1.5. The experimental results are consistent with the simulation ones. This kind of device can apply to the ultrasensitive strain sensing.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
WenBing Yu, Ying Wang, and Jie Tian "Strain characteristics of selectively infiltrated photonic crystal fibers", Proc. SPIE 9655, Fifth Asia-Pacific Optical Sensors Conference, 96552A (1 July 2015); https://doi.org/10.1117/12.2183600
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Photonic crystal fibers

Fiber optics sensors

Liquids

Refractive index

Temperature metrology

Optical fibers

Back to Top