9 August 2016 Glass fiber-reinforced polymer packaged fiber Bragg grating sensors for low-speed weigh-in-motion measurements
Author Affiliations +
Abstract
The weight of rolling trucks on roads is one of the critical factors for the management of road networks due to the continuous increase in truck weight. Weigh-in-motion (WIM) sensors have been widely used for weight enforcement. A three-dimensional glass fiber-reinforced polymer packaged fiber Bragg grating sensor (3-D GFRP-FBG) is introduced for in-pavement WIM measurement at low vehicle passing speed. A sensitivity study shows that the developed sensor is very sensitive to the sensor installation depth and the longitudinal and transverse locations of the wheel loading position. The developed 3-D GFRP-FBG sensor is applicable for most practical pavements with a panel length larger than 6 ft, and it also shows a very good long-term durability. For the three components in 3-D of the developed sensor, the longitudinal component has the highest sensitivity for WIM measurements, followed by the transverse and vertical components. Field testing validated the sensitivity and repeatability of the developed 3-D GFRP-FBG sensor. The developed sensor provides the transportation agency one alternative solution for WIM measurement, which could significantly improve the measurement efficiency and long-term durability.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Mu’ath Al-Tarawneh and Ying Huang "Glass fiber-reinforced polymer packaged fiber Bragg grating sensors for low-speed weigh-in-motion measurements," Optical Engineering 55(8), 086107 (9 August 2016). https://doi.org/10.1117/1.OE.55.8.086107
Published: 9 August 2016
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

3D metrology

Fiber Bragg gratings

Glasses

Fiber reinforced polymers

Roads

Fiber optics sensors

Back to Top