Presentation + Paper
10 July 2018 Measurement of large on-axis and off-axis mirrors using software configurable optical test system (SCOTS)
Andrew E. Lowman, Greg A. Smith, Lori Harrison, Steven C. West, Chang Jin Oh
Author Affiliations +
Abstract
One of the major challenges of optical fabrication is measurement of the surface when first polished out, before its figure is within the capture range of interferometry. A high dynamic range instrument with good accuracy is needed to efficiently guide the processing. Our approach is to use the Software Configurable Optical Test System (SCOTS), a deflectometry technique that uses a camera and liquid crystal display to measure the surface slope. We describe the use of SCOTS in the fabrication of a 6.5 m on-axis mirror and an 8.4 m off-axis mirror segment (Giant Magellan Telescope primary). SCOTS has the dynamic range to measure high slope errors early in the mirror figuring process, with sufficient accuracy to corroborate later interferometric measurements. Accurately measuring low order figure errors with SCOTS requires careful calibration of the system geometry. Details of the data collection and processing, and comparison to interferometry measurements are presented.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew E. Lowman, Greg A. Smith, Lori Harrison, Steven C. West, and Chang Jin Oh "Measurement of large on-axis and off-axis mirrors using software configurable optical test system (SCOTS)", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107061E (10 July 2018); https://doi.org/10.1117/12.2313855
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Interferometry

Cameras

Zemax

Calibration

Ray tracing

Monochromatic aberrations

RELATED CONTENT

Deflectometry vs. interferometry
Proceedings of SPIE (May 13 2013)
Iterative surface construction for blind deflectometry
Proceedings of SPIE (September 27 2016)
A human eye model based on bimorph flexible mirror
Proceedings of SPIE (September 01 2005)
Scanning pentaprism test for the GMT 8.4 m off axis...
Proceedings of SPIE (July 19 2010)

Back to Top