Paper
15 July 2004 Melting threshold and melt removal dynamics during laser interaction with steel and HgCdTe in femtosecond regime
Author Affiliations +
Abstract
The results of a study of a single 200 femtosecond laser pulse interaction with thick stainless steel and HgCdTe samples are reported. The threshold pulse energies required to produce sample surface melting are measured. The melt dynamics, material removal rate and evolution of surface morphology were observed for different pulse energies and number of laser pulses. It was observed that, similarly to long laser pulse interaction, a layer of melt can be produced at the sample surface. Increase of laser pulse energy results in melt ejection in the radial direction toward the periphery of the interaction zone resembling evaporation recoil melt removal typical for laser interaction in range from nanosecond to cw. The removal of material from stainless steel sample was observed to be highly nonuniform. The columnar structures were observed on the surface of stainless steel samples. The period of these structures is dependent on laser pulse energy and number of pulses. The observed melting threshold is compared with the theoretical prediction obtained using two-temperature model.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir V. Semak, Jeffrey G. Thomas, and Benjamin R. Campbell "Melting threshold and melt removal dynamics during laser interaction with steel and HgCdTe in femtosecond regime", Proc. SPIE 5339, Photon Processing in Microelectronics and Photonics III, (15 July 2004); https://doi.org/10.1117/12.527725
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulsed laser operation

Femtosecond phenomena

Laser drilling

Laser energy

Mercury cadmium telluride

Laser damage threshold

Optical testing

Back to Top