We will present an update on the Levitated Sensor Detector (LSD) project for detection of high frequency (10-100kHz) gravitational waves above the region previously probed by LIGO. We discuss experimental trapping results of different geometries of NaYF4 hexagonal plates and our recent milestone of increasing the levitated test mass by an order of magnitude. These materials are excellent candidates for laser refrigeration of the internal temperature, which would enable trapping with larger optical intensities and GW detection at frequencies approaching the MHz range. Finally, we examine the progress of the 1-meter prototype that is under construction at Northwestern University.
We present the first experimental optical trapping of ytterbium-doped sodium yttrium fluoride (Yb:NaYF4) hexagonal microdisks with a dual-beam dipole trap. These high-aspect-ratio hexagonal microdisks exhibit reduced photon recoil heating due to light scattering while allowing for 10s of kHz mechanical frequencies. These features make them good candidates as force sensors for the Levitated Sensor Detector (LSD) project, which detects high-frequency gravitational waves above the region previously probed by LIGO. We discuss motional dynamics of these microdisks by showing their motional spectra in comparison with analytical and numerical models and the recent progress of 1-meter LSD prototype that is under development at Northwestern University.
Kilometer-scale ground-based gravitational-wave interferometers have generated a new field of astronomy by viewing the universe in gravitational wave (GW) radiation, operating at a peak sensitivity of frequencies ranging from 10s of Hz to a few kHz.1 A great many discoveries have resulted from these detectors, such as the existence of binary black hole and neutron star systems.2 It is of great scientific value to extend the GW search to other frequencies, just as has been the case for the exploration of the EM spectrum. The levitated sensor detector (LSD) is a 1 m tabletop scale high frequency (< 10 kHz) gravitational wave detection experiment currently under construction at Northwestern University.3 It will serve as a 1 m prototype for future generations of levitated mass based instruments. The LSD sensitivity has more favorable frequency scaling at these frequencies compared to laser interferometer detectors such as LIGO and VIRGO due to different limiting noise factors, the LIGO free spectral range, and the fact that the LSD is a resonant sensor. The LSD is sensitive to GWs from binary coalescence of sub-solar-mass primordial black holes and as-yet unexplored new physics in the high-frequency GW window, such as the annihiation of gravitationally bound states of the QCD axion by black hole superradiance. Many promising experiments and techniques exist for probing the GW spectrum below the LIGO frequency band; they include pulsar timing arrays,4, 5 atomic clocks and other interferometers,6, 7 LISA,8, 9 and DECIGO.10 There are also a number of proposals, experiments and initial bounds set above the LIGO frequency band, largely over 100 MHz.11–18 Fewer established methods to systematically probe the kHz-MHz part of the GW spectrum, where a variety of interesting sources could exist. At Northwestern, we are constructing a compact Michelson interferometer configuration with Fabry-P´erot arms as shown in Figure 3, designed to work in the 10-100 kHz band. In the medium and long term, a multi index dielectric stack will be suspended at an anti-node of the standing wave inside each Fabry-P´erot arm. In the short term, this is likely to be a disc or disc like object (discussed in sections 2 and 2.2) — with which a degree of experimental success has already been had. A second laser is used to read out the position of the object as well as cool it along the cavity axes.19
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.