Reliability and characterization of 850 nm 25 Gbit/s (25G) InGaAs/AlGaAs vertical-cavity surface-emitting lasers (VCSELs) with oxide apertures, fabricated at OEpic Semiconductors, Inc., are presented. These 25G VCSELs have demonstrated a threshold current of <1.0 mA and a slope efficiency of 0.45 W/A. An optical output power of >;5.0 mW and rise and fall times of 18 and 25 ps, respectively, have been achieved. The non-hermetically sealed VCSELs were stress tested at 85o C under bias for up to 1200 hours to achieve accelerated failure modes to predict atmospheric-ambient reliability for applications such as board-to-board data communications. VCSEL failures are likely due to a combination of factors including the propagation of dislocation defects from the oxide layers, the incorporation of ambient oxygen into and near the active region, as well as layer cracking and separation near the active regions due to stress from the mechanical strain induced by the oxide layers. Our high-speed VCSELs use 0.5λ optical cavity lengths and oxide layers that are as close as 126 nm to the active region. OEpic’s design uses two or more oxide apertures to increase current confinement, allowing for greater overall current density. The proximity of the oxide layers to the active region, coupled with the increased heating of the active region due to a higher current density, likely results in a non-radiative recombination-based lasing failure. An increase of the optical cavity length, a decrease of the selective oxidation rate, and a reduction of the oxide layer thickness are measures that are expected to improve the VCSEL reliability.
We are reporting the first successful fabrication of 850-nm buried tunnel junction (BTJ) VCSELs. Multiple parameters were considered for the design. First, n-type dopants other than silicon had to be considered for an abrupt junction. Second, proper layer thickness had to be chosen. Finally, compatibility with regrowth and processing had to be ensured. In this paper the successful fabrication and performance of 850-nm BTJ VCSELs with tunnel junctions comprised of GaAs and AlGaAs materials is demonstrated. Key achieved parameters include a significant improvement in the slope efficiency from approximately 0.45 W/A in an oxide-aperture VCSEL to over 0.6 W/A.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.