The PCW (Polar Communications and Weather) mission is a dual satellite mission with each satellite in a highly eccentric orbit with apogee ~42,000 km and a period (to be decided) in the 12–24 hour range to deliver continuous communications and meteorological data over the Arctic and environs. Such as satellite duo can give 24×7 coverage over the Arctic. The operational meteorological instrument is a 21-channel spectral imager similar to the Advanced Baseline Imager (ABI). The PHEOS-WCA (weather, climate and air quality) mission is intended as an atmospheric science complement to the operational PCW mission. The target PHEOS-WCA instrument package considered optimal to meet the full suite of science team objectives consists of FTS and UVS imaging sounders with viewing range of ~4.5° or a Field of Regard (FoR) ~ 3400×3400 km2 from near apogee. The goal for the spatial resolution at apogee of each imaging sounder is 10×10 km2 or better and the goal for the image repeat time is targeted at ~2 hours or better. The FTS has 4 bands that span the MIR and NIR with a spectral resolution of 0.25 cm−1. They should provide vertical tropospheric profiles of temperature and water vapour in addition to partial columns of many other gases of interest for air quality. The two NIR bands target columns of CO2, CH4 and aerosol optical depth (OD). The UVS is an imaging spectrometer that covers the spectral range of 280–650 nm with 0.9 nm resolution and targets the tropospheric column densities of O3 and NO2 and several other Air Quality (AQ) gases as well the Aerosol Index (AI).
SciSat-1, otherwise known as the Atmospheric Chemistry Experiment (ACE), is a Canadian satellite mission for remote sensing of the Earth's atmosphere. It was launched into low Earth orbit (altitude 650 km, inclination 74 degrees) in August 2003. The primary instrument onboard ACE is a high resolution (maximum path difference ± 25 cm) Fourier Transform Spectrometer (FTS) operating from 2.4 to 13.3 microns (750-4100 cm-1). The satellite also features a dual spectrograph known as MAESTRO with wavelength coverage 280-1000 nm and resolution 1-2 nm. A pair of filtered CMOS detector arrays takes images of the sun at 0.525 and 1.02 nm. Working primarily in solar occultation, the satellite provides altitude profile information for temperature, pressure, and the volume mixing ratios for several dozen molecules of atmospheric interest. Scientific goals for ACE include: (1) understanding the chemical and dynamical processes that control the distribution of ozone in the stratosphere and upper troposphere; (2) exploring the relationship between atmospheric chemistry and climate change; (3) studying the effects of biomass burning in the free troposphere; and (4) measuring aerosols to reduce the uncertainties in their effects on the global energy balance.
The primary objective of the Canadian SciSat-1 mission is to investigate the processes that control the distribution of ozone in the stratosphere. The SciSat-1 satellite consists of two major science instruments; an Atmospheric Chemistry Experiment (ACE) high-resolution Fourier-transform spectrometer (FTS) and an ultraviolet/visible/near-infrared spectrograph. These instruments primarily function in occultation mode; however, during the dark portion of the orbit the Earth passes between the sun and the satellite. This configuration provides the opportunity of acquiring some nadir-view FTIR spectra of the Earth. Preliminary nadir spectra obtained with the ACE FTS are presented and analyzed for methane, ozone and nitrous oxide. Applications of these measurements to the study of global warming and air pollution monitoring are discussed.
SciSat-1, otherwise known as the Atmospheric Chemistry Experiment (ACE), is a Canadian satellite mission for remote sensing of the Earth's atmosphere. It was launched into low Earth orbit (altitude 650 km, inclination 74 degrees) in August 2003. The primary instrument onboard ACE is a high resolution (maximum path difference ± 25 cm) Fourier Transform Spectrometer (FTS) operating from 2.4 to 13.3 microns (750-4100 cm-1). The satellite also features a dual spectrograph known as MAESTRO with wavelength coverage 280-1000 nm and resolution 1-2 nm. A pair of filtered CMOS detector arrays takes images of the sun at 0.525 and 1.02 nm. Working primarily in solar occultation, the satellite provides altitude profile information for temperature, pressure, and the volume mixing ratios for several dozen molecules of atmospheric interest. Scientific goals for ACE include: (1) understanding the chemical and dynamical processes that control the distribution of ozone in the stratosphere and upper troposphere; (2) exploring the relationship between atmospheric chemistry and climate change; (3) studying the effects of biomass burning in the free troposphere; and (4) measuring aerosols to reduce the uncertainties in their effects on the global energy balance.
The Atmospheric Chemistry Experiment (ACE) was launched in August 2003 on board the Canadian scientific satellite SciSat-1. The ACE payload consists of two instruments: ACE-FTS, a high resolution (0.02 cm-1) Fourier transform infrared spectrometer and MAESTRO (Measurement of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation), a dual UV-visible-NIR spectrograph. Primarily, the two instruments use a solar occultation technique to make measurements of trace gases, temperature, pressure and atmospheric extinction. It will also be possible to make near-nadir observations with the ACE instruments.
The on-orbit commissioning of the instruments and spacecraft were undertaken in the months following launch. At the end of this period, a series of science-oriented commissioning activities were undertaken. These activities had two aims: the first was to verify and extend the measurement results obtained during the pre-launch Science Calibration Test campaign and the second was to confirm appropriate parameters and establish procedures for operational measurements (occultation and near-nadir observations and exo-atmospheric calibration measurements). One of the most important activities was to determine the relative location of each instrument field of view and optimize the pointing of the sun-tracker to provide the best viewing for both instruments.
The SciSat-1 mission is a dedicated Canadian science satellite that will investigate processes that control the distribution of ozone in the stratosphere. The SciSat-1 satellite consists of primarily two science instruments; an Atmospheric Chemistry Experiment (ACE) high-resolution Fourier-transform spectrometer (FTS) and an ultraviolet-visible-near-infrared spectrograph. These instruments will primarily function in occultation mode; however, during the dark portion of the orbit the Earth will pass between the sun and the satellite. This configuration will give rise to the opportunity of acquiring some nadir-view FTIR spectra of the Earth. Since the ACE FTS was designed to view a hot source (i.e., the Sun) at high resolution using a single scan, it is necessary to determine if the FTS will provide nadir spectra of the relatively cold atmosphere and surface with a sufficient signal-to-noise ratio. Methane, ozone and carbon monoxide gases were used in the cell for the purpose of determining the measurement characteristics of the ACE FTS instrument for a low-intensity source. These measurements were compared with data obtained from the Interferometric Monitor for Greenhouse (IMG) gases onboard the ADEOS satellite. The results show that the ACE FTS should be able to measure the abundant trace gases in the atmosphere with sufficient signal-to-noise ratio.
KEYWORDS: Fourier transforms, Sensors, Databases, Signal to noise ratio, Atmospheric modeling, Data modeling, Imaging systems, Molecules, Satellites, Temperature metrology
The SCISAT-1 mission, also known as the Atmospheric Chemistry Experiment (ACE), is a Canadian satellite mission to investigate the chemical and dynamical processes that control the distribution of ozone in the stratosphere and upper troposphere. The satellite is scheduled to launch in August 2003, carrying two main instruments: a high-resolution infrared Fourier transform spectrometer (ACE-FTS) and a dual grating UV-Vis-NIR spectrometer known as MAESTRO (Measurement of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation) both operating primarily in solar occultation mode. Aspects of the mission pertaining to work done by ACE science team members from the University of Waterloo will be described, such as: the ACE-FTS forward model for retrieval of temperature, pressure and VMR profiles; ACE-FTS instrument testing and results; and the ACE Database along with data storage and processing hardware.
The Atmospheric Chemistry Experiment (ACE) is the mission selected by the Canadian Space Agency for its next science satellite, SCISAT-1. ACE consists of a suite of instruments in which the primary element is an infrared Fourier Transform Spectrometer (FTS) coupled with an auxiliary 2-channel visible (525 nm) and near infrared imager (1020 nm). A secondary instrument, MAESTRO, provides spectrographic data from the near ultra-violet to the near infrared, including the visible spectral range. In combination the instrument payload covers the spectral range from 0.25 to 13.3 micron. A comprehensive set of simultaneous measurements of trace gases, thin clouds, aerosols and temperature will be made by solar occultation from a satellite in low earth orbit. The ACE mission will measure and analyse the chemical and dynamical processes that control the distribution of ozone in the upper troposphere and stratosphere. A high inclination (74 degrees), low earth orbit (650 km) allows coverage of tropical, mid-latitude and polar regions. This paper presents the instrument-related activities in preparation for launch. In particular, activities related to the integration of instrument to spacecraft are presented as well as tests of the instrument on-board the SciSat-1 bus. Environmental qualification activities at spacecraft-level are described. An overview of the characterization and calibration campaign is presented. Activities for integration and verification at launch site are also covered. The latest status of the spacecraft is also presented.
The SciSat-1 satellite will primarily function in occultation mode; however, during the dark portion of the orbit the Earth will pass between the sun and the satellite. This configuration will give rise to the opportunity of acquiring some nadir-view FTIR spectra of the Earth. Since the ACE FTS was designed to view a hot source (i.e., the Sun) at high resolution using a single scan, it is necessary to determine if the FTS will provide nadir spectra of the relatively cold atmosphere and surface with a sufficient signal-to-noise ratio. Hence, preliminary tests were performed on the ACE FTS instrument using a background source that provided a radiative contrast of about 100 K with the gas in a cell, thereby approximately simulating the atmospheric temperature conditions of the Earth. Methane, ozone and carbon monoxide gases were used in the cell for the purpose of determining the measurement characteristics of the ACE FTS instrument with respect to the nadir radiation emanating from the planet’s surface and atmosphere over most of the thermal infrared region. The signal-to-noise ratio from the laboratory test measurements is used to estimate the error on column measurements of carbon monoxide and other gases.
A novel and simple technique is described for the calibration of satellite instruments for the measurement of atmospheric ozone. Ozone is generated in a gas cell and spectral measurements of the ozone absorption are measured with a standard Fourier-transform spectrometer (FTS) in order to determine the amount of ozone in the cell. The satellite instrument then views the cell using an appropriate illumination source. In this presentation the preliminary results from the ozone calibration procedure are presented for the ACE FTS and MAESTRO instruments to show how consistently both instruments measure ozone. The thermal infrared band of ozone at 4.7 microns was used to provide the calibration of the ACE interferometer, whereas the Chappuis band at 600 nm was used to characterize the response of the MAESTRO instrument. The ozone transmission spectra that were derived from the ACE FTS and MAESTRO spectrograph measurements were found to be in good agreement with the simulated spectra of known amounts of ozone from a radiative transfer model. All of the results yielded column ozone amounts that were within 10% of each other. These calibration measurements were taken at the University of Toronto in March 2003, before the expected launch date of the SciSat-1 satellite in August 2003.
SCISAT-1, the Atmospheric Chemistry Experiment, will use the solar occultation technique to make measurements of trace gases, atmospheric extinction, temperature, and pressure in the stratosphere and upper troposphere. The accuracy and reliability of the ACE results will be demonstrated through a validation program including ground-, balloon-, and satellite-based observations. This program will be ongoing throughout the lifetime of the mission. To provide sufficient global coverage, a worldwide group of participants will be collaborating with the ACE Validation team. Descriptions and locations of the validation experiments are given.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.