A new material pairing is presented for the realisation of sub-wavelength graings in this work and has been used to realise high contrast gratings which operate at wavelengths of 10 μm and greater. The chosen material pairing overcomes the absorption issue which prevents the popular Si/SiO2 pairing from being useful at wavelengths above 6 μm. The obstacles that exist with the currently used grating materials for this wavelength range are described and it is outlined how the chosen materials overcome these issues. It is numerically demonstrated that gratings utilising these materials are capable of wideband high reflectivity. The gratings were fabricated using standard optical photolithography only and it is shown experimentally that the spectral response of gratings which were fabricated show good agreement with theoretically predicted performance
In this work, a low cost optical pH sensing system that allows for small volume sample measurements was developed. The system operates without the requirement of laboratory instruments (e.g. laser source, spectrometer and CCD camera), this lowers the cost and enhances the portability. In the system, an optical arrangement employing a dichroic filter was used which allows the excitation and emission light to be transmitted using a single fibre thus improving the collection efficiency of the fluorescence signal and also the ability of inserting measurement. The pH sensor in the system uses bromocresol purple as the indicator which is immobilised by sol-gel technology through a dip-coating process. The sensor material was coated on the tip of a 1 mm diameter optical fibre which makes it possible for inserting into very small volume samples to measure the pH. In the system, a LED with a peak emission wavelength of 465 nm is used as the light source and a silicon photo-detector is used to detect the uorescence signal. Optical filters are applied after the LED and in front of the photo-detector to separate the excitation and emission light. The fluorescence signal collected is transferred to a PC through a DAQ and processed by a Labview-based graphic-user-interface (GUI). Experimental results show that the system is capable of sensing pH values from 5.3 to 8.7 with a linear response of R2=0.969. Results also show that the response times for a pH changes from 5.3 to 8.7 is approximately 150 s and for a 0.5 pH changes is approximately 50 s.
We report on the focusing performance of reflective two-dimensionally varying high contrast grating lenses based on silicon. The combination of their subwavelength nature and their high refractive index contrast makes it possible to create highly tolerant and planar microlenses. We used a rigorous mathematical code to design the lenses and verified their performance with finite element simulations. We also investigated the effects of grating thickness, angle, and wavelength of incidence in these simulations. Experimentally, we show the evolution of the beam profile along the optical axis for a lens with a high (0.37) numerical aperture. We have explored a wide range of numerical apertures (0.1–0.93) and show that the lenses behave as expected across the full range. Our analyses demonstrate the large design flexibility with which these lenses can be made along with ease of fabrication and potential for a number of applications in micro-optics.
We report on the focusing performance of reflective 2D high contrast grating lenses based on silicon. The combination of their subwavelength nature and their high refractive index contrast make it possible to create highly tolerant and planar microlenses. We used a rigorous mathematical code to design the lenses and verified their performance with finite element simulations. We also investigated the effects of grating thickness, angle and wavelength of incidence in these simulations. Experimentally, we show the evolution of the beam profile along the optical axis for a lens with a high (0.37) numerical aperture. We have explored a wide range of numerical apertures (0.1 – 0.93) and focal lengths (5 μm – 140 μm) and show that the lenses behave as expected across the full range. Our analyses demonstrate the large design flexibility with which these lenses can be made along with ease of fabrication and potential for a number of applications in micro-optics.
Initial results are presented on the electroless deposition of metal contacts to p-type gallium nitride (GaN). Deposition procedures were developed for the deposition of both nickel and tungsten-cobalt (W-Co) contacts onto p-type GaN. Attempts to deposit platinum on p-type GaN failed, despite the fact that electroless platinum deposition was successfully achieved on other substrate types. Nickel contacts were overlaid with gold and annealed in oxygen ambient to form ohmic contacts with specific contact resistivity values down to 2x10-2 &OHgr;cm2. Measurements at elevated temperatures up to 140 degrees C showed that the specific contact resistivity was almost independent of temperature. The tungsten-cobalt contacts showed rectifying behaviour even after annealing at 650 degrees C. This makes this contact type a possible candidate for Schottky contacts in high temperature applications.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.