The DAG (Dogu Anadolu Gözlemevi) observatory is the largest observatory in Turkey and is composed by the 4m-class infrared Telescope, the Rotating Enclosure, the dome fixed structure and the auxiliary building. It is mounted on the top of Karakaya Mountain at 3170m altitude, close to Erzurum, in Turkey. This presentation refers to the DAG Rotating Enclosure. The Rotating Enclosure is octagonal sized steel structure with eight trolleys acting on a rai of 18.6 meters diameter. The structure is and 14.5m high over a pillar 9.0m. It is equipped with an observing slit door composed by two L-Shaped elements. Six sliding ventilation doors, about 3.7x6.5m each, that can be opened independently and with different degrees of aperture allow for optimizing the internal airflow. Immediately Inside the observing slit doors, there is a windscreen consisting of 3 panels that, in case of wind, are raised in accordance with the telescope elevation to protect it. The panels have a specific degree of air permeability to still allow ventilation for the telescope. A 6.5tons overall bridge crane allows to move pieces in every zone of the rotating enclosure for the maintenance of the telescope optics. At the beginning of November 2023, EIE carried out all acceptance tests with the end customer and delivered the rotating enclosure to ATASAM. This paper provides the results of the final erection and reports the procedures and results of the Acceptance Tests performed by EIE for the DAG Rotating Enclosure activities. 4m class telescopes and related Domes represent nowadays a consolidated part of EIE core-business, a low costs standard product able to satisfy the most critical observational requirements of astronomers.
The DAG (Dogu Anadolu Gözlemevi) Eastern Anatolia Observatory is an astronomical project fully funded by Turkish Ministry of Development and the Atatürk University of Astrophysics Research Telescope (ATASAM). DAG Observatory is provided with a 4m-class optical and infrared telescope, equipped with secondary (0.76m) and tertiary mirrors which furnish the telescope with two Nasmyth foci. Since 2015, the project has seen the crucial contribution of EIE GROUP in the Design, Production and on-site Installation of the mount structure of the 4m class optical/nearinfrared telescope (DAG Telescope) in contract with AMOS company. EIE GROUP is also the main contractor of the 18.6m-diameter Rotating Building (DAG Dome) at an altitude of 3170m asl on the Erzurum Plateau, Turkey. After completing a full assembly and testing in the factory, the telescope was subsequently disassembled and transported to the final installation site. Now, on-site assembly activities have been completed, and all internal acceptance tests regarding the mount structure have been conducted. This document focuses on the on-site assembly activities of the EIE Group, as well as the related internal pre-commissioning, commissioning, and functional and acceptance tests.
Rubin Observatory Dome was designed and built by EIE GROUP with headquarters in Venice-Mestre, Italy. The Design Phase was completed in February 2016. On-site activities started in the spring of 2017. The Dome is approaching the final completion of testing and integration. The Dome utilizes a steel structure. This supports a bi-parting, two door aperture, a uniquely designed moving Light Windscreen, a Light Baffled Louver System, an overhead bridge crane, a rear access door and numerous platforms. In this paper, we present the status of the final assembly, integration and testing.
COSMO Large Coronagraph (COSMO LC) is a telescope dedicated to the measurement of the Sun magnetic field. This project is currently at a design phase funded by the National Science Foundation under the technical direction of the High Altitude Observatory.
COSMO LC is a refractive telescope whose objective lens has a clear aperture of 1.4m, it will be the largest refractive telescope in the world. This telescope can observe the Sun corona thanks to the internal occulter which is able to obscure the solar disk. This device needs to accomplish two main functions: 1) adapt its diameter to the Sun apparent size, 2) reject all the incoming heat to not start any air turbulence which leads to the degradation of image quality (seeing).
Diameter change is accomplished by means of a cam mechanism which actuates 14 petals arranged azimuthally while the occulter cooling is obtained through cold water running through internal channels and forced air convection.
This article describes the mathematical models employed to quantify the seeing effect on image resolution and the technical solutions adopted to implement the above-mentioned functions. In addition, the tests performed on this device are described along with the results.
The Dogu Anadolu Gözlemevi (DAG) Eastern Anatolia Observatory is an astronomical project fully funded by Turkish Ministry of Development and the Atatürk University of Astrophysics Research Telescope (ATASAM). DAG Observatory will be provided with a 4m-class optical and infrared telescope, equipped with secondary (0.76m) and tertiary mirrors which furnish the telescope with two Nasmyth foci. Since 2015, the project has seen the crucial contribution of EIE GROUP in the Design, Production and on-site Installation of the 4m class optical/near-infrared telescope (DAG Telescope) in contract with AMOS company. EIE GROUP is also the main contractor of the 18.6m-diameter Rotating Building (DAG Dome) at an altitude of 3170m asl on the Erzurum Plateau, Turkey. The telescope was completely pre-assembled and successfully tested at the Integration Area Facilities of the EIE GROUP. Subsequently disassembled and transported to the final installation site. Despite the serious effects of the pandemic, the EIE GROUP, in agreement with its final Customer, has adopted a telescope assembly strategy integrated with the final assembly phases of the Dome. This allowed EIE to mount the entire telescope, in a single summer season, in total safety (thanks to the special measures adopted). This paper focuses on the development of this on-site assembly EIE activities of DAG Telescope, which at present have exceeded the 95% of completion. The main critical issues and related engineering solutions will be analyzed, with emphasis on both managerial and erection approaches adopted by EIE GROUP for this integrated phase of the project completion.
The Vera C. Rubin Observatory is the result of a public-private partnership between the USA National Science Foundation (NSF), the lead Federal Agency of the project, the Department of Energy and the Association Of Universities For Research In Astronomy (AURA), and the LSST Corporation. EIE GROUP has developed the Detail Design, the Manufacturing, and the Erection on Site of the giant Rotating Building. In this regard, 2021 was a year full of successes for the development of the project.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.