CTA (Cherenkov Telescope Array) is a project for the next generation of the ground-based gamma-ray observatory. CTA will cover a wide energy range, 20 GeV and 300 TeV, by 3 types of the telescopes whose diameters are different. The Large-Sized Telescopes (LSTs) of the CTA are designed to cover the lowest energy range. We are working on mirrors for 4 LSTs which will be built at La Palma, Spain. The parabolic primary mirror of CTA-LST is 23 m diameter and its focal length is 28 m. The primary mirror consists of 198 segmented mirrors. Total effective reflective area is about 370 m2. Each mirror has a hexagonal shape of 1.51 m side-by-side size. It has a sandwich structure which consists of aluminum honeycomb (60 mm thickness) and two glass surfaces (2.7 mm) and the total weight is about 47 kg. We used a sputtering deposition technique to coat in the surface with 5 layer. The coated layers protect the surface for long operation such as 10 years at outside with a reflectance degradation of less than 1 % a year. The reflectance of the mirror reaches about 92 % at 400 nm and its resolution is 0.5 mrad in diameter that contains the 80 % light reflected by the mirror. The production technique based on cold slumping gave us the stable its production. We report on the design of the segment mirror and the production of about 950 hexagonal 2 m2 mirrors to achieve the parabolic shape of the optical system for 4 LSTs.
The Cherenkov Telescope Array1 (CTA) is the next-generation ground-based observatory for very-high-energy gamma rays. The CTA consists of three types of telescopes with different mirror areas to cover a wide energy range (20 GeV–300 TeV) with an order of magnitude higher sensitivity than the predecessors. Among those telescopes, the Large-Sized Telescope (LST) is designed to detect low-energy gamma rays between 20 GeV and a few TeV with a 23 m diameter mirror. To make the most of such a large light collection area (about 400 m2), the focal plane camera must detect as much reflected Cherenkov light as possible. We have developed each camera component to meet the CTA performance requirements for more than ten years and performed quality-control tests before installing the camera to the telescope.2, 3 The first LST (LST-1) was inaugurated in October 2018 in La Palma, Spain (Figure 1).4 After the inauguration, various calibration tests were performed to adjust hardware parameters and verify the camera performance. In parallel, we have been developing the analysis software to extract physical parameters from low-level data, taking into account some intrinsic characteristics of the switched capacitor arrays, Domino Ring Sampler version 4 (DRS4), used for sampling the waveform of a Cherenkov signal. In this contribution, we describe the hard- ware design of the LST camera in Section 2, a procedure for low-level calibration in Section 3, and the readout e of the LST camera after the hardware calibration with a dedicated analysis chain in Section 4.
Hirohiko Shimizu, M. Ameri, F. Cadoux, Osvaldo Catalano, C. Chapron, S. Cuneo, Toshikazu Ebisuzaki, Flavio Fontanelli, Valerio Gracco, Philippe Gorodetzky, Yoshiya Kawasaki, P. Musico, Patric Nedelec, T. Patzak, M. Pallavicini, Alessandro Petrolini, E. Plagnol, F. Pratolongo, Mario Sannino, Naoto Sakaki, Yoshiyuki Takahashi, M. Takeda, Yoshiyuki Takizawa, Masahiro Teshima
The Extreme Universe Space Observatory (EUSO) is a wide angle refractive telescope in near-ultraviolet wavelength region to detect extremely high energy cosmic rays by observing time-resolved air-fluorescence images of the extensive air showers from the International Space Station. The focal surface detector of the EUSO is designed to be a mosaic of multianode photomultipliers to realize the single photoelectron counting capability. We describe the current status of the conceptual design and the feasibility study of the focal surface of the EUSO telescope.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.