We report the highest power conversion efficiency (PCE) of 74.6% at peak and more than 70% PCE maintained up to high output power of 20W in broad stripe laser diodes (LDs) lasing at a 9xx-nm band. Optimal layer structure design including enhancement of asymmetry in waveguide structure and elimination of nonlinear resistance due to band discontinuity enables electric resistance to be reduced by 33% compared to conventional LDs without notable increase in optical internal loss. These PCE values from middle to high output power range marks the highest record reported so far.
Design optimization of single emitter broad stripe 900-nm laser diodes was experimentally studied to achieve high power conversion efficiency (PCE) for a use in fiber laser systems. We chose two approaches for PCE improvement. The first is an optical confinement factor Γwell optimization which affects threshold current and internal loss. The second is electric resistance minimization to suppress unwanted power consumption causing heat generation. As a result, the newly designed LD successfully demonstrates the high PCE of 72.5 % at middle power range and 66.7 % at practical high power of 20 W.
Polarization characteristics of self-aligned stripe (SAS) laser diodes (LDs) and Ridge-LDs are investigated to realize highly efficient polarization beam combined (PBC) LD modules. Vertical layers of both lasers are designed identically. Near field patterns (NFP) of TM polarization for the Ridge-LD showed peaks at the side edges, as expected by the strain simulation. On the other hand, SAS-LD showed a relatively flat and weak profile. Polarization purity (ITE/ (ITE+ITM)) of SAS-LDs exceeds 99%, while those of the Ridge-LDs are as low as 96%. It is confirmed that our SAS-LDs are suitable sources for PBC with low power loss.
Design optimization of single emitter broad stripe 9xx-nm laser diodes was studied to achieve ultimate high power and high efficiency operation for a use in fiber laser pumping and other industrial applications. We tuned laser vertical layer design and stripe width in terms of optical confinement as well as electrical resistance. As a result, newly designed LDs with 4mm-long cavity and 220 μm-wide stripe successfully demonstrate maximum CW output power as high as 33 W and high efficiency operation of more than 60 % PCE even at 27 W output power. In pulse measurement, the maximum output of 68 W was obtained.
KEYWORDS: High power lasers, Reliability, Semiconductor lasers, Active optics, Heterojunctions, Fiber lasers, Laser systems engineering, Absorption, Broad area laser diodes, Absorbance
915nm high-power and high-reliability single emitter laser diodes based on Asymmetric Decoupled Confinement
Heterostructure (ADCH) are demonstrated. Advantage of ADCH is that it can optimize active layer confinement () and
confinement ratio of p- to n-doped layer (p/n), independently, to manage large effective spot size and low internal loss
without any penalty in carrier confinement. 4mm-cavity, 100m wide stripe LDs with large effective spot size of 1.5m
demonstrates record high Catastrophic-optical-damage (COD) free operation over 42W output. Accelerated aging tests are
conducted for 325 devices in total with 1.8 million device hours. Mean time to failure of random failure mode is estimated
to be 1.1 million hours for 12W at room temperature.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.