Dr. Nancy H. Phillips Profile

Dr. Nancy H. Phillips

Research Specialist at 3M Co

SPIE Involvement:

Author

Publications (2)

Proceedings Article | 26 September 2016 Presentation + Paper

Investigation of a wedge adhesion test for edge seals

Michael Kempe, John Wohlgemuth, David Miller, Lori Postak, Dennis Booth, Nancy Phillips

Proceedings Volume 9938, 993803 (2016) https://doi.org/10.1117/12.2239161

KEYWORDS: Photovoltaics, Glasses, Humidity, Ultraviolet radiation, Solar cells, Adhesives, Calcium, Polymers, Visualization, Opacity

Read Abstract +

Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be due to inconsistencies in sample history, sample batch, or small changes in sample preparation/assembly from one month to the next. Because the fracture strength of typical edge seal materials is so low, they cannot be relied upon for mechanical strength. A small stress or strain on the edge seal is capable of promoting delamination or tearing causing the edge seal to fail. Because of this, edge seals are very dependent on the processing and construction parameters in the full size PV module such that any long term evaluation of their durability must be conducted on full size modules to be accurate.

Proceedings Article | 8 October 2014 Paper

Quantifying PV module microclimates and translation into accelerated weathering protocols

Nancy Phillips, Kurt Scott

Proceedings Volume 9179, 91790L (2014) https://doi.org/10.1117/12.2063122

KEYWORDS: Solar cells, Photovoltaics, Humidity, Polymers, Reliability, Climatology, Xenon, Solar radiation, Light sources, Temperature metrology

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years