High-brightness tapered diode lasers generally work in the fundamental transverse mode. Still, under the condition of high power, the beam quality is often deteriorated by the influence of higher-order modes. At the junction of the device ridge waveguide and the conical amplifier, there is a great difference in the refractive index step △n, which is the key area for producing high-order modes and influencing each other. In this paper, the physical process of high-order side mode excitation in a large optical cavity InGaAs/AlGaAs conical LD was studied. The mode changes of the propagation interface were simulated by the eigenmode expansion method (EME). The effects of various separation distances of the beam spoilers were compared and verified by experiments. The results show that through the practical design of the separation distance of beam spoilers at the mode propagation interface, the tapered LD can maintain the high beam quality of M2=1.9 at 3.2 W.
KEYWORDS: Semiconductor lasers, Waveguides, Refractive index, Neodymium, Laser applications, Far-field diffraction, High power lasers, Laser energy, Optical resonators, Near field
In this research, the transversal mode of 970 nm broad area laser diode based on a large optical cavity is studied. The vertical far-field patterns were measured to be dependent on the cavity caused facet loss. High-orders modes achieve lasing with higher facet loss while they can be completely suppressed by a low facet loss. The suppression of high-order modes was attributed to be an increase in the discrimination of differential quantum efficiency between high-order modes and the fundamental mode, which matches well with simulation. When the discrimination exceeds probable fluctuations, the high-order modes will be completely suppressed and lasing of single fundamental mode will achieve. According to our experiment results, the optimal resonance cavity length is about 6 mm in order to realize fundamental mode and simultaneously a high slope efficiency. As a consequence, high efficiency 970 nm broad area laser with slope efficiency over 1.07 W/A and full wavelength half maximum (FWHM) less than 2 nm@1A is demonstrated.
In this research, the transversal mode of 970 nm broad area laser diode based on a large optical cavity is studied. The vertical far-field patterns were measured to be dependent on the cavity caused facet loss. High-orders modes achieve lasing with higher facet loss while they can be completely suppressed by a low facet loss. The suppression of high-order modes was attributed to be an increase in the discrimination of differential quantum efficiency between high-order modes and the fundamental mode, which matches well with simulation. When the discrimination exceeds probable fluctuations, the high-order modes will be completely suppressed and lasing of single fundamental mode will achieve. According to our experiment results, the optimal resonance cavity length is about 6 mm in order to realize fundamental mode and simultaneously a high slope efficiency. As a consequence, high efficiency 970 nm broad area laser with slope efficiency over 1.07 W/A and full wavelength half maximum (FWHM) less than 2 nm@1A is demonstrated.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.