The Evanescent Wave Coronagraph (EvWaCo) exploits the frustration of the total internal reflection (FTIR) between a prism and a lens put in contact. The starlight is transmitted through the contact area while the light from the companion is reflected. An EvWaCo prototype, equipped with an adaptive optics (AO) system, will be installed at the 2.4m Thai National Telescope as an on-sky demonstrator of the EvWaCo mask’s achromatic capabilities while testing new AO control techniques. To characterize the Extreme Adaptive Optics System (XAO) for this prototype, we developed a bench equipped with a DM192 ALPAO deformable mirror, a 15×15 sub-apertures Shack-Hartmann wavefront sensor (SH-WFS), and a two-track phase plate simulating an average seeing of 1.4" at the Thai National Telescope, and the best seeing at 1.00". Following our previous communications on the characterization of the DM and the phase plate, we present how we calibrate the sensor for the WFS and the interaction matrix. This paper presents preliminary results obtained from experiments after closing the loop using a leaky integrator.
The Evanescent Wave Coronagraph uses a focal plane mask comprising a lens and a prism placed in contact so that frustrated total internal reflection can occur - the principle governing starlight attenuation. This type of Lyot coronagraph has three main capabilities: i) the mask adapts itself to the wavelength, ii) the size of the mask is adjustable by pressure adjustment, and iii) both the light coming from the star and companion can be collected simultaneously. Previous experimental results, obtained without adaptive optics and in unpolarized light, showed a raw contrast of 10−4 at 3 λ/D in the I-band and at 4 λ/D in the R-band. Its performance has been limited so far by uncorrected residual aberrations of the optical bench that generate speckles close to the inner working angle. To study the mask performances close to the diffraction limit and compare them with theoretical models, a deformable mirror is installed in the optical path of the testbed to perform wavefront correction. In this work, we report the results obtained in the laboratory using this upgraded setup. We show the preliminary results of correcting the non-common path aberrations using the scientific camera as the wavefront sensor and compare them with expected theoretical performances. The corrections are applied after finding the optimal commands that maximize the variance at the detector plane.
The Evanescent Wave Coronagraph (EvWaCo) is a type of Lyot coronagraph that uses an achromatic focal plane mask comprising a lens and a prism in contact. The National Astronomical Research Institute of Thailand (NARIT) plans to install an EvWaCo prototype equipped with an adaptive optics system (AO) to correct the aberrated wavefront in real-time at the unused left Nasmyth port of the Thai National telescope. To prepare for this installation, a large adapter with a diameter of 1.3 m and twelve carbon fiber poles serve as the supporting beams to hold the prototype. This work focuses on the mechanical design and testing of the large adapter, considering the prototype requirements and installation limitations. In particular, mechanical deformations and stress distributions are analyzed under survival conditions. The maximum weight of the prototype is 200 kg, and a folding mirror installed in a translation stage is placed inside the large adapter. The structural optimization uses the finite element method to deal with the constraints and ensures a high performance. The carbon fiber poles comprise carbon fiber-reinforced polymer (CFRP) that reduce the weight by approximately 30% compared to an all-aluminum structure. Each carbon fiber pole weighs about 1.75 kg, and our testing results show that it can support up to eight times the prototype's weight. The epoxy adhesive, used to join different materials, can withstand a pull-out strength of up to three times the prototype's weight. The installation of this adapter is expected to start by the end of 2024.
In pursuit of advancing large array receiver capabilities and enhancing the 16-element Heterodyne Array Receiver Program (HARP) instrument on the James Clerk Maxwell Telescope (JCMT), we have successfully fabricated 230 GHz finline superconductor-insulator-superconductor (SIS) mixers. These mixers are critical for assessing the potential and prospective for the HARP instrument’s upgrade. Unlike the existing HARP’s mixer, we replace the probe antenna with an end-fire unilateral finline as the waveguide to planar circuit transition. This mixer design is expected to operate from about 160–260 GHz (approximately 47% bandwidth), and the mixer chips’ current-voltage (I-V) curves have been characterized, showing promising results with a quality factor (Rsg/Rn) exceeding 9.3. Evaluation of the double-sideband (DSB) receiver noise temperature (Trx) is currently underway. Once successfully characterised, our immediate aim is to scale the mixer to operate at HARP’s frequency range near 345 GHz to achieve similar broad RF bandwidth performance. Ongoing simulations are currently being conducted for the design of the 345 GHz finline mixer. This work marks a crucial step toward enhancing HARP receiver performance with better sensitivity and wider Intermediate Frequency (IF) bandwidth, enabling higher-frequency observations, and expanding the scientific potential of the JCMT and its collaborative partners.
SCUBA-2/POL-2 has been the most productive instrument at JCMT since it’s fully commissioned in 2011 September, and it’s constantly oversubscribed during the call-for-proposals by a factor of 3 to 5. The proposed new 850μm instrument will feature 7272 state-of-the-art Microwave Kinetic Inductance Detectors (MKIDs) operated below 100 mK, fully utilizing the JCMT’s 12 arcmin Field of View (FoV), thus have all the capabilities of SCUBA-2 at 850 μm, yet will map an order of magnitude faster. The new instrument will be incorporated with intrinsic polarization measurement capability which is 3636 pixels. Mapping the 850 μm polarization will be improved by a factor of at least 20.
The National Astronomical Research Institute of Thailand, together with the Institut d’Optique Graduate School and Centre de Researche Astrophysique de Lyon, has been developing the Evanescent Wave Coronagraph (EvWaCo) a new kind of Lyot coronagraph that uses a lens and prism placed in contact as its focal plane mask. By the principle of frustrated total internal reflection, EvWaCo enables an achromatic rejection and ability to collect the light from the star and the companion. An EvWaCo prototype equipped with adaptive optics will be installed at the Thai National Telescope as an on-sky demonstrator. This demonstrator will work on a 1.2 × 0.8 m2 elliptical sub-aperture of the Thai National Telescope to reach a raw contrast of 10−4 at 3λ/D over the wavelength range [600 nm, 900 nm]. The completed optical design contains all the essential light path channels in high contrast imaging fitted inside a 960 mm×960 mm optical breadboard, namely the guiding camera channel, companion channel, star channel, and wavefront sensing channel. We also show the results of the tolerancing and straylight analysis.
The Evanescent Wave Coronagraph (EvWaCo) is a coronagraph that utilizes the principle of Frustrated Total Internal Reflection (FTIR) to simultaneously collect both the starlight and the companion light by using a focal plane mask composed of a convex diopter and a prism placed in contact. The mask exhibits an achromatic behavior, and its size can be varied by adjusting the pressure at the contact area. The National Astronomical Research Institute of Thailand (NARIT) is developing a prototype to demonstrate on-sky the performance of EvWaCo. This prototype will be installed at the Thailand National Telescope (TNT). In this paper, the mechanical design of the EvWaCo prototype is documented. The mechanical requirements of this prototype include a maximum weight equal to 180 kg, a maximum deformation of 120 μm, and an average deformation of 100 μm for every optical component. To achieve this, the structural parts are designed to achieve the high directional stiffness, and the passive thermal compensation is conceptualized for athermalization. Then, the lightweight, high-performance materials are selected. The Finite Element Analysis (FEA) method is used to simulate the performance of the prototype under the realistic conditions. The prototype performs with an average deformation of 43 ± 15 μm and a maximum deformation of 63 ± 18 μm at the average thermal condition of ΔT = 13.6 ⁰C. The instrument performs with an average deformation of 67 ± 16 μm and a maximum deformation of 92 ± 19 μm at the worst thermal condition of ΔT = 25 ⁰C. This instrument design weights 175.7 kg.
Lightweight, aluminum, freeform prototype mirrors have been designed and fabricated by a Thai led team, with UK support, for intended applications within the Thai Space Consortium (TSC) satellite series. The project motivation was to explore the different design strategies and fabrication steps enabled by both conventional (mill, drill, and lathe) and additive (3D printing) manufacture of the prototype substrates. Single Point Diamond Turning was used to convert the substrates into mirrors and optical metrology was used to evaluate the different mirror surfaces. The prototype criteria originated from the TSC-1 satellite tertiary mirror, which is designed to minimize the effect of Seidel aberrations before the beam enters the hyperspectral imager. To converge upon the prototype designs, Finite Element Analysis (FEA) was used to evaluate the different physical conditions experienced by the prototypes during manufacture and how these influence the optical performance. The selected designs satisfied the mass and surface displacement criteria of the prototype and were adapted to either the conventional or additive manufacturing process. This paper will present the prototype design process, substrate manufacture, optical fabrication, and an interferometric evaluation of the optical surfaces comparing the conventional and additive manufacturing processes.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.